Inactive Total Small Business Set-Aside (FAR 19.5)

****Amemdment No. 0001 in attachments******** ****Amemdment No. 0002 in attachments******** ****Amemdment No. 0003 in attachments******** ****Amemdment No. 0004 in attachments******** ****Amemdment No... ****Amemdment No. 0001 in attachments******** ****Amemdment No. 0002 in attachments******** ****Amemdment No. 0003 in attachments******** ****Amemdment No. 0004 in attachments******** ****Amemdment No. 0005 in attachments******** Synopsis: 1. CONTRACT INFORMATION: The NAIC code is 541310, size standard is $8 million. This procurement has been established as a Small Business Set Aside and only Small Businesses shall be considered by the Smithsonian Institution. This announcement is for the selection and award of one or more Architect-Engineer Indefinite Delivery Indefinite Quantity (IDIQ) Multidiscipline Contracts that would provide design support for Smithsonian facilities. Eighty-five percent of work is anticipated to be in the Washington, DC metropolitan area including Maryland and Virginia. The remaining fifteen percent of the work is anticipated to be other geographical locations where Smithsonian Institution facilities are located including Arizona, Florida, Hawaii, Massachusetts, New Jersey, New York, Pennsylvania, Panama, and Belize. This contract is being procured in accordance with the Brooks Architect-Engineer (A-E) Act as implemented by FAR Subpart 36.6—Architect-Engineer Services. It is anticipated that the base IDIQ contracts will be for a period of one year with nine one-year options. After award of an IDIQ contract, A-E services will be provided on a work order contract basis. Individual work orders will not exceed $5 million per work order with an unlimited annual IDIQ contract amount. The selected firms must be capable of responding to and working on multiple, large task orders concurrently. Task orders will be awarded based on the A-Es current workload and its ability to accomplish the order in the required time, type of services required, previous experience, including customer satisfaction, performance, and quality of deliverables under the current IDIQ, and geographic location. Contracts may be issued up to one year after selection approval, the government reserves the right to determine the quantity of contracts awarded. 2. PROJECT INFORMATION: Multidisciplinary architectural and engineering services to be provided for the Smithsonian Institution may include but are not limited to the following: preparation of reports, studies and design criteria; site and geotechnical investigations; surveys; programming; conceptual design; facilities assessment; facility and project master planning; presentations for project review by various bodies including the National Capital Planning Commission (NCPC), the Commission of Fine Arts (CFA), and the D.C. Historic Preservation Review Board; multidisciplinary architectural and engineering development of contract documents comprised of drawings and specifications for architectural, structural, mechanical, electrical, plumbing, fire protection, security systems and hazardous materials abatement for a variety of routine and complex projects; cost estimating for project proposals and detailed construction cost estimating; value engineering; code compliance and accessibility review; commissioning; technical information for design-build requests for proposals. The work may include new construction, major and minor repairs, alterations, building renovations, tenant fit-up and operations, landscape design, facility improvement projects, interior space planning, and development and implementation of facility master plan projects. Post design and construction phase services may include construction bid and negotiation support, site visits, construction administration, shop drawing and submittal reviews, technical assistance, commissioning/start-up/fit-up design support and preparation of as-built record drawings. A-Es will be expected to respond to Smithsonian requests for services with expediency, thoroughness, and a high level of design quality. Projects may include, but are not limited to museums, zoological parks, research facilities, retail, and food service facilities. Firms unable to accept hazardous materials abatement projects need not apply. 3. SELECTION CRITERIA: The Smithsonian Institution will interview only the most highly qualified submissions to this Solicitation. Firm evaluation and selection will be conducted in accordance with FAR 36.6 and will be based on the following primary criteria which are listed in descending order of importance: A. Prime contractor and subcontractors’ firm qualifications, experience, and past performance in the following types of projects: design of a variety of sizes of new and renovations of museums, galleries, libraries, scientific/research/engineering facilities. Projects submitted must be only from the past 10 years and must demonstrate experience in addressing issues associated with National Landmark Properties, facilities accommodating large numbers of public visitors, environmentally sensitive sites, renovation of facilities while maintaining operations, Leadership in Energy and Environmental Design (LEED) criteria, developing design build request for proposals. Responding firms are required to clearly identify disciplines to be performed in-house and those to be subcontracted. Firms must submit the names and supporting qualifications of all subcontractors. B. Demonstration of specialized experience and technical competence of the staff with the following: design of a variety of sizes of new and renovations of museums, galleries, libraries, scientific/research/engineering facilities. Experience submitted must demonstrate experience in addressing issues associated with National Landmark Properties, facilities accommodating large numbers of public visitors, environmentally sensitive sites, renovation of facilities while maintaining operations, Leadership in Energy and Environmental Design (LEED) criteria, developing design build request for proposals. The firm must have registered and licensed personnel, either in-house or through consultants, in the following key disciplines and areas of expertise: Project manager, architect, civil engineer, electrical engineer, communications and related systems engineer, structural engineer, mechanical engineer, plumbing engineer, fire protection engineer, geotechnical engineer, land surveyor, interior designer, cost estimator, landscape architect, and industrial hygienist. The fire protection engineer shall also have a minimum of five years’ experience dedicated to fire protection engineering, and have a degree in Fire Protection Engineering from an accredited university. The evaluation of these disciplines will consider education, training, overall and relevant experience and longevity with the firm. C. Capacity of the project team to accomplish the work within specified time constraints based on submittal of firms’ current and projected workloads. Firms should demonstrate experience with large task order contracts and handling multiple, large task orders simultaneously. The availability of an adequate number of personnel in the key disciplines shall be presented to ensure that the firm can meet the potential of working on multiple task orders for multiple customers in the required timeframes. Identify the current and ongoing work project commitments of key team members proposed for this IDIQ and how they can be made available as SI tasks are assigned. D. Firm competence as demonstrated by past performance on contracts in terms of work management, responsiveness, quality of work, cost control and compliance with performance schedules. A proposed Work Management and Design Quality Management Plan shall be submitted with your SF 330 and shall include an organization chart and briefly address management approach, team organization, professional registration, coordination of in-house disciplines and consultants, and prior experience of the prime firm and any of their significant consultants on similar contracts. The plan shall also address quality control procedures, cost control, coordination of in-house disciplines and consultants, and scheduling procedures. Only submit examples from the past 10 years. E. Firm location in reasonable proximity of Smithsonian Institution facilities, especially Washington, D.C. The primary office where the work will be performed and the staffing at that office shall be clearly indicated on the Work Management Plan. The geographic location of the firm will also be considered in order to evaluate the firm’s knowledge of the potential project locations. F. Computer capability. Contractor and subcontractors must be able to comply with Smithsonian Institution standards for documentation, drawings, and specifications. These standards are available for viewing at the SI Office of Facilities Engineering and Operations Architect-Engineer Information Center website, at https://www.sifacilities.si.edu/ae-contact Required proficiencies include the following: (1) AutoCAD most current version; (2) Microsoft Office, including Project (3) Adobe Acrobat Professional; (4) 3-dimensional modeling, rendering and animation in specialized software such as Autodesk 3ds Max, Autodesk Maya; (5) Building Information Modeling in specialized software such as Autodesk Revit, Google SketchUp Pro, Graphisoft ArchiCAD, Navisworks, as well as familiarity with IFC and Cobie file standards; (6) Experience with computer aided facilities management software such as Facility Center is highly recommended. 4. SUBMISSION REQUIREMENTS: The successful firm will be expected to sign a standard, unmodified, Smithsonian A-E contract. Interested, qualified firms are invited to submit the required information as specified below via Express Mail or courier to Smithsonian Institution, Office of Contracting & Personal Property Management (OCON&PPM), 600 Maryland Ave, Suite 500E, Washington, DC 20024, Attention: Christine Grant, no later than Tuesday, March 15, 2022 by 2:00PM ET. Fax/email submissions will NOT be accepted. Firms must submit Parts I and II of the Standard Form 330 for the prime and joint venture(s). Part II of the SF330 must be submitted for each consultant. On SF 330, Part I, Block 5, include SAM/DUNS number for the prime firm. On the SF 330, Part I, Block F, provide the title and contract award dates for all projects listed in that section. 2 copies of the SF 330 are required in addition to an electronic PDF version. Failure to submit the completed SF 330 will render the submission unacceptable. Part I of the SF 330 shall have a page limit of 125 pages. A page is one side of a sheet. Font size shall not be less than 12 font. Preface the submission with an attached original and loose copy of a brief letter on company letterhead. Questions can be directed to Christine Grant in the Office of Contracting & Personal Property Management by email at grantca@si.edu . The Smithsonian will dispose of submitted material 60 days after receipt submittals will not be returned. THIS IS NOT A REQUEST FOR PROPOSALS. Fax submissions will NOT be accepted. The deadline for submission EXTENDED Tuesday, March 15, 2022 by 2:00PM ET