Inactive Total Small Business Set-Aside (FAR 19.5)

Amendment 001 - This RFQ is hereby amended on April 26, 2021 to add the Questions received from interested parties and Government responses to those questions. The revised RFQ to extend the due date f... Amendment 001 - This RFQ is hereby amended on April 26, 2021 to add the Questions received from interested parties and Government responses to those questions. The revised RFQ to extend the due date for the RFQ close date has also been added. This amendment incorporates the following changes: - Questions and Answers to the solicitation have been included. - RFQ SECTION L: INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS OR RESPONDENTS, due dates have changed. - Quotes due date has been extended to 6 May 2021, 4:00 PM CST. *** SITE VISIT scheduled - See page 3 of the RFQ for details *** Please Note: It is important to submit a complete quote package. Below is a list of the required documents. Failure to complete and provide the required documents and RFQ Sections will result in your quote receiving no further consideration. List of required documents: - Cover Sheet (See Section L of the RFQ, page 50) - Completed Section K – Representations, pages (24-49) *Note: If offeror has already registered in SAM and has completed their Reps & Certs in SAM, then for provision 52.212-3 (pages 29-43) offeror only needs to complete paragraph (b) from page 32 along with the other Reps & Certs in Section K. - Technical Conformance Statement (to include Installation/Quality Control Plan). Technical Conformance Statement shall not exceed 15 pages. Any pages in excess of the first 15 pages will not be evaluated. - Completed Attachment 1: SF18 - Completed Attachment 2: Technical Compliance Matrix and Pricing Worksheet - Completed Attachment 3: Prior Experience Worksheet This is a combined Synopsis/Solicitation for commercial item (Supplies and Services) prepared in accordance with the format in FAR Subpart 12.603, and guidance of FAR Part 12 and FAR Part 13 as supplemented with additional information included in this notice. General Services Administration (GSA) Federal Acquisition Service (FAS) Large Special Order Program (SOP) anticipates the award of a firm-fixed price (FFP) Purchase Order as the result of this Request for Quote (RFQ). This announcement constitutes the only Solicitation that will be published; quotes are being requested and a written Solicitation will not be issued. This combined Synopsis/Solicitation will be provided electronically only. The solicitation number is ID22210006 and issued as an RFQ. GSA intends to award a single FFP Purchase Order. The clauses and provisions referenced in this solicitation may be reviewed/obtained in full text form at http://www.acquisition.gov/far. The Solicitation document, the incorporated provisions and the clauses are those in effect through Federal Acquisition Circular (FAC) 2021-03. This requirement is being advertised as a Small Business set-aside and only qualified offerors may submit quotes. The applicable North American Industrial Classification Code System (NAICS) code is 333999, All Other Miscellaneous General Purpose Machinery Manufacturing and small business size standard is 500 employees. The appropriate Federal Supply Class (FSC) is 4933, Weapons Maintenance Equipment. In accordance with instructions from Section L of the RFQ, offerors shall submit all parts of their quote to the GSA Contracting Officer, Tammy Mattox, via the GSA ASSIST Electronic Ordering System (ITSS) NLT Monday, April 29th, 2021, 4:00 PM Central Standard Time (CST). After you submit the Company and POC information, you will be added to the Solicitation which will allow you to submit your quote via ASSIST. Should you have issues with access to the ASSIST/ITSS System or solicitation, you may forward your quote directly to the Contracting Officer via email at tammy.mattox@gsa.gov and the Contract Specialist via email at phillip.cleveland@gsa.gov. The link to ITSS is listed below and the ITSS Help Desk number is 1-877-243-2889. ITSS web page is https://web.itss.gsa.gov/Login. To submit a quote for consideration for award, offeror must send GSA an email identifying (1) offeror’s name, and (2) the name of the individual employee who will act as the offeror’s point of contact (POC) for this requirement that is “registered in ITSS.” OFFERORS MUST IDENTIFY THE COMPANY NAME AND THEPOC’S NAME EXACTLY AS IT APPEARS IN ITSS. “Registered in ITSS” or “Registration in ITSS” means an offeror is successfully registered in ITSS such that the Government can select offeror’s designated POC in ITSS to receive the RFQ, view an order, and be able to submit a quote. Some offerors have multiple company divisions and employees registered in ITSS making it difficult for GSA selection. Therefore, to ensure that offeror is able to submit a quote, prompt submission of the above ITSS offeror information (offeror’s name and POC) is requested. An email must be sent to tammy.mattox@gsa.gov and phillip.cleveland@gsa.gov in order to ensure registration. Any questions regarding the solicitation should be submitted in writing to Tammy Mattox, Contracting Officer at tammy.mattox@gsa.gov and Phil Cleveland, Contract Specialist at phillip.cleveland@gsa.gov by April 16th, 2021 at 4:00PM CST with the subject line “RFQ Questions on SOLICITATION #ID22210006”.

Inactive

NOTE: THIS IS NOT A REQUEST FOR QUOTE SOURCES SOUGHT 1.0 Purpose/Scope This is an open market Sources Sought regarding a tentative requirement to Purchase & Install a Manganese Phosphate Coating Syste... NOTE: THIS IS NOT A REQUEST FOR QUOTE SOURCES SOUGHT 1.0 Purpose/Scope This is an open market Sources Sought regarding a tentative requirement to Purchase & Install a Manganese Phosphate Coating System. As part of its market research, the General Services Administration (GSA), on behalf of its customer, is issuing this Sources Sought to determine if there exists an adequate number of interested and qualified contractors capable of performing the requirement as further described. The Government may use the responses to this Sources Sought for information and planning purposes. The technical specifications describe only the currently contemplated possible specifications and may vary from the actual specifications identified in final Product Descriptions included in any Request for Quote (RFQ). This Sources Sought is only for the purpose of identifying potential sources as part of GSA’s market research. No RFQ currently exists; therefore, do not request a copy of the RFQ. Please note that GSA is not required to use the open market for any resulting RFQ. This Sources Sought is issued for information and planning purposes only and does not itself constitute an RFQ. Responses to this Sources Sought will not be considered as formal quotes and GSA does not intend to award an open market delivery order(s) or Blanket Purchase Agreement (BPA) based on responses to this Sources Sought. 2.0 Objectives of the Sources Sought Understand the level of interest and availability of potential vendors that could provide the requested turnkey solution. Identify issues, roadblocks, and barriers to successful solution implementations. Obtain vendor feedback on if the vendor will utilize any subcontractors or teaming arrangements. Identify if a total solution can be provided via open market contractors. Provision of other benefits of leveraging a turnkey solution. Comments regarding any ambiguities or needed clarifications of the Draft technical specifications. Obtain vendor feedback on any other pre-existing contracts that might meet this need. 3.0 Sources A Sources Sought Notice is being posted to betaSAM and to GSA's eBuy. 4.0 Draft Technical Specifications See Attachment 1 for the Statement of Work (SOW) which provides the performance requirements for the vendor that will meet the Government’s need. 5.0 Notes to Responders All information received in response to this Sources Sought marked “Proprietary” will be protected and handled accordingly. Interested parties are responsible for adequately marking proprietary or competition sensitive information contained in their response. Responses to the Sources Sought will not be returned. Responders are solely responsible for all expenses associated with responding to this Sources Sought. GSA will not pay for information received in response to this Sources Sought. There is no commitment by the Government to issue an RFQ, make an award or awards, or to be responsible for any monies expended by industry responses to this Sources Sought. Please limit responses or capability statement to three pages. Review the objectives under Section 2.0 and include any concerns, possible issues, comments, or suggestions relative to those points in the statement. Any format is acceptable. Also include contract number, relevant information on the company, and if available, brief descriptions of recent and relevant projects for products similar to that described in the draft technical specifications. Do not submit pricing information in response to this Sources Sought. Submit Sources Sought responses to the Contract Specialist via email by the close date specified in betaSAM. Contact information is listed below. Phil Cleveland Contract Specialist phillip.cleveland@gsa.gov 817-850-8426