Inactive Total Small Business Set-Aside (FAR 19.5)

This Amendment 0005 is being issued to provide a revised GSA response to RFI No. 8 of the Amendment 0004 and an additional RFI that was inadvertently left out from previous Amendments. Please see atta... This Amendment 0005 is being issued to provide a revised GSA response to RFI No. 8 of the Amendment 0004 and an additional RFI that was inadvertently left out from previous Amendments. Please see attached Amendment 0005 Q-A document for details. This amendment must be signed and returned with your offer. _________________________________________________________________________________________________ This Amendment No. 0004 is being issued to extend the proposal due date and provide additional information in response to RFIs received. Please see Amendment No. 0004 and attachments to it for details. This amendment must be signed and returned with your offer. _________________________________________________________________________________________________ This Amendment No. 0003 (see attached SF30) is being issued to: 1. Postpone the site visit scheduled on March 31, 2020; once GSA has determined the new site visit date, a follow on amendment will be issued providing the information for it; 2. Please submit your questions/RFIs, if any, by COB, Monday April 6, 2020; 3. Extend the proposal due date to Thursday, April 30, 2020, by 4:00 P.M. EST. This amendment must be signed and returned with your offer. _________________________________________________________________________________________________ This Amendment 0002 is being issued to reschedule the Pre-Proposal and Site Visit information. Please see attached Amendment 0002 for details. This amendment must be signed and returned with your offer. ____________________________________________________________________________________________ This Amendment 0001 (See Attached Amendment 0001) is being issued to postpone the Pre-Proposal/Site Visit as follows: I.D. Pre-Proposal Conference Date: March 31, 2020 Time: 10:00 AM to 12:00 PM Location: Leo W. O’Brien Federal Building 1 Clinton Ave. Albany, NY 12207 Conference Room - TBD Interested parties must contact Jayshree Tank, Contract Specialist to register, by COB March 27, 2020, by sending an email with the names of attendees, company name, contact information mobile phone no. as well as email address. Only those parties who have notified the Contract Specialist and provided necessary information in advance of the walk-through will be allowed to attend. To request reasonable accommodations due to a disability, contact Jayshree Tank, Contract Specialist at (212) 577-8681. _______________________________________________________________________________________________ THIS IS A SOLICITATION NOTICE. The General Services Administration, Region 2, Public Buildings Service, hereby issues a Request for Proposal (RFP) # 47PC0220R0014, to replace existing roofing systems at the Leo O’Brien Federal Building. The project is being solicited with a Base Bid; one (1) alternative to the base scope of work and one (1) Option. The government will determine which approach (base or alternative) to take prior to the award. It will be an either or type situation regarding the base work versus the alternative and clearly identified within the award document. The Option work applies to both the base work and the alternative approach regardless of which is selected by the government. Base Bid Work includes but is not limited to the following work: approximately 17,225 sf of existing roofing systems at the Leo O’Brien Federal Building (127 ft x 157 ft) will be replaced with new roofing systems with a new fully adhered TPO membrane roofing system comprised of torch down vapor barrier, multiple layers of Type VI Extruded Polystyrene (XPS) insulation (amount of insulation required will create a height of approximately 4.5 inches), cover board, and eighty (80) mil TPO membrane; fire rated pressure treated wood will be used to add curbing and or curbing height as depicted within project documents; existing roof drains will receive new inserts and strainers; all drains will be confirmed as being clear and free any obstruction prior to completion; the existing roof has been identified to contain asbestos containing material (ACM) in specific areas as identified with project documents will be abated as part of project; new OSHA-complaint guardrails will be installed around the perimeter; a roof tie-off system (anchor points) will be installed and pull rating verified; and new lightning protection system installed and certified as functioning and operational. At the conclusion of the project, the existing site will be restored to its original condition. As part of the verification process to confirm proper installation the roofing system’s technical representative must conduct periodic inspection during the course of the installation, conduct a final inspection to verify TPO seam and roof terminations integrity. Additionally within one year of the date of substantial completion at a time mutually agreement upon by GSA and contractor the contractor as part of their contract shall perform an infrared scan of all the roofing areas using an independent third party. The scan results shall be sent directly to GSA with copy going to contractor. Contractor shall resolve any concerns identified. Contractor shall provide GSA with labor and material warranty in accordance with project documents. Alternative Base Bid Work includes performing ALL of the work outlined within the base bid scope of work EXCEPT that the amount of insulation to be installed will instead create a height of 6.5 inches and that a raised roof area will be created under each of the four (4) cell tower areas. The creation of this new raised roof area around the cell tower footprint is being required to facilitate the installation of the increase amount of insulation around the cell tower structures. The roof assembly remains relatively unchanged for wood substrate a stick down membrane is required such as Grace Ice and Water and or a similar type material. The approach required to install the TPO on this newly created raised area will be the same as that for the elevator penthouse roof area. The newly created raised roof under the cell towers will require walkway mats to be installed in that area to provide safe walk areas when working on and around the cell towers. Option Work (option work applies regardless of whether base or alternative is selected): Furnish all material, equipment, labor and supervision to perform the following work which includes but is not limited to: removing the existing roof pavers and installing a monolith roof under the cooling towers; reinstalling the previously removed pavers ensure all damaged pavers are replaced with new; removing and replacing the narrow band of roof surrounding the building at this level (10th floor); existing roof drains will receive new inserts and strainers; all drains will be confirmed as being clear and free of any obstruction prior to completion; remove one (1) door and frame, sealing up the opening by toothing in new masonry concrete block; and sealing the mason walls surrounding the cooling tower area (three sides) by applying two (2) coats of Dow-Corning Silicone coating. Additionally within one (1) year of the date of substantial completion, at a time mutually agreed upon by GSA and contractor, the contractor (as part of their contract) shall perform an infrared scan of all roofing areas using an independent third party. The scan results shall be sent directly to GSA with copy going to contractor. Contractor shall resolve any concerns identified. Contractor shall provide GSA with full labor and material warranty in accordance with project documents. TYPE OF SET-ASIDE: This requirement will be solicited as a 100% Total Small Business set-aside.