Inactive

(i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, -- Streamlined Procedures for Evaluation ... (i) This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Federal Acquisition Regulation (FAR) Subpart 12.6, -- Streamlined Procedures for Evaluation and Solicitation for Commercial Items, in conjunction with FAR Subpart 13.5 -- Simplified Procedures for Certain Commercial Products and Commercial Services, and supplemented with additional information included in this notice. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued. (ii) The solicitation number 36C26224Q0754 is issued as a Request for Quotation (RFQ) and the Government intends to award a single Firm-Fixed Price (FFP) award. (iii) The provisions and clauses in this document are in effect through the Federal Acquisition Circular (FAC) 2024-02, dated December 22, 2023. (iv) The US Government, Veterans Affairs (VA) seeks to make procurement for EEG SYSTEM for the VA Tucson Healthcare System. This solicitation is being procured as a brand name or equal IAW 52.211-6 -- Brand Name or Equal. The submissions must meet the below salient characteristics. (v) This solicitation is for unrestricted full and open competition using NAICS Code 339113. (vi) Product Information: *The Brand Name Manufacturer is Nihon Kohden* Item # Description/Part Number* Qty EEG-ACQ-SYS/ZA EEG1200 sys w/SFF PC QUAD NIC RMSW 4 HD-MIC2/ZA HD CAMERA WITH DV SW IR AND MIC2 1 NK-INTERCOM INTERCOM SYSTEM 1 A/NQ-222FSJ 2 CONDUCTOR CABLE W/DRAIN WIRE 1 NK-LS-120AJ EEG-1200 PHOTICCONTROL UNIT W/ROLL STAND 1 A/FLTSCREEN-XB3 24 INCH MONITOR WITH SPEAKERS 3 ABCE422-11MED-N/ZA HOSPITAL GADE UPS 420VA 1 QP-160AK cEEG TRENDS SOFTWARE 4 WEE-PROMO-32CH/ZA airEEG 32ch PROMO KIT 3 A/0064-01 ADAPTER PLATE-MAIN UNIT (WEE-1200 3 A/WM-0001-18 CHANNEL MOUNT BASKET FOR AIREEG 3 WEE-1200PHOTIC/ZA PHOTIC CABLE CONNECT KIT, AIREEG 3 JE921-COMPLETE/ZA JE-921 KIT WITH MINI JB 1 GCX-HD-MIC2/ZA CART W/MONITOR HD CAM IR DV SW MIC2 UPS 3 LS-120AJ-S EEG-1200 PHOTIC STIMULATION CONTROL UNIT 3 LS-703A-01 PHOTIC FLASH LAMP ASSEMBLY 3 686981B 10M PATIENT CABLE,JE-922A MINIINPUT BOX 1 A/POUCH-JE922 POUCH, MINI INPUT BOX 1 EEG-1200R NEUROFAX SFF PC EEG REVIEW SYSTEM 2 QP-160R-1 ** SOFTWARE, TREND REVIEW 2 #NEU-AT-4DCEEG CEEG ADVANCED TRAINING 1 NBG-SVR/ZA NEUROLOGY SERVER AND STORAGE SOLUTION 1 #NK-NWB-REPORT CUSTOM NEUROREPORT BUILD FEE 2 QP-160R-MU CEEG TRENDSOFTWAREREVIEW, SERVER ENVIRON 1 A/NWB-HL7NIS HL-7 NEUROWORKBENCH INTERFACE SERVICE 1 #NK-ITSYSTEMSCFG NK-ITSYSTEMS-CFG 2 Install-Solution-N INSTALL SOLUTION 1 Salient Characteristics/Specification **Manufacturer is Nihon Kohden** Must be able to synchronize with multiple windows in review with separate setting for review of data, including intra-cranial data. User interface for acquisition must allow extensive control of layout, tools, buttons, and views. Must be capable of rapid EEG up to full intra-cranial capabilities with secondary data stream capabilities. The system must have real-time wireless (not Bluetooth) accessibility for full data for critical review and intervention. Must have the ability to interface with 3rd party software that does not require additional purchases which allows for quantitative analysis including wide band multichannel analysis of customized length data sets. Must have cortical stimulation hardware that allows for a full range of stimulation parameters for accurate diagnosis. For not just Ojemann-Penfield based parameters, but single pulse and fast pulse stimulation up to 1000 Hz. This system must have cortical stimulation that allow for rapid and automatic mapping of functionality, with ability to use patient specific anatomical models, and consolidated reporting. The system must have the ability to select multiple collections of relevant events and export to PowerPoint with full review functionality. Must allow clinicians to see all patient information in a horizontal screen which allows for whole breadth analysis. This system must allow for acquisition with transparent video, aggregate channel labels for high channel count, and security of data with local server transfers with error checking and auto purging backup. The cortical stimulation must allow for rapid and automatic mapping of functionality, with ability to use patient specific anatomical models, and consolidated reporting. The system must have graphical patient anatomy models for electrode locations. Must have data management clipping that allows for function across the entire patient admission data set. The system must have real-time monitoring with full interactivity of up to 12 patients per system and acuity-based controls with per patient summary sets. The unit must have review for full admission, not just study or day based, review of data without excessive navigation via the database to locate/interact with files. Period of Performance Deliver all items including any installation/training no later than one (1) year from the award date. Risk Control None. Offeror quotations must demonstrate meeting the salient physical, and functional characteristics included in this solicitation; otherwise, they will be considered not acceptable. The technical specifications for this requirement are listed for Brand Name or Equal per FAR 52.211-6. The information provided above is intended to be descriptive, not restrictive, and to indicate the quality that will be satisfactory. The interested parties bear full responsibility to ensure their submission demonstrates to the government that they can satisfy the requirement by providing the brand name or equal to the supplies being requested. (vii) Delivery Requirements: Place of Delivery Department of Veterans Affairs VA Tucson Healthcare System 3601 S Sixth Ave Warehouse Tucson, AZ 85723 Period of Performance/Delivery Timeframe: Deliver all items including any installation/training no later than one (1) year from the award date. (viii) The provision at 52.212-1, Instructions to Offerors Commercial Items, applies to this solicitation. FAR 52.212-1 Addendum: All offeror quotes for this solicitation must be received electronically through email no later than Friday, March 8, 2024, at 4:00 PM PST. Ensure to reference solicitation number 36C26224Q0123 within the subject line of the email. Any offeror quotes received after the prescribed date/time shall be considered late and will not be considered for award. Any questions regarding this solicitation must be received electronically through email no later than Wednesday, February 28, 2024, at 4:00 PM PST. Offers and questions shall be sent by email to Contract Specialist Bridgett Sharma at Bridgett.Sharma@VA.gov and Contracting Officer Deronte Reid at Deronte.Reid@VA.gov. AUTHORIZED DISTRIBUTOR LETTER (ADL) Any suppliers, distributors, and/or resellers who participate in this solicitation, must be authorized to provide the items by the Original Equipment Manufacturer (OEM). An Authorized Distributor Letter (ADL) from the manufacturer shall be included with your response to be considered for award. If the potential Authorized Supplier is not the OEM, the Authorized Supplier must provide an Authorized Distributor Letter from the OEM signed within the last 90 days. The letter must either state specific product(s) quoted or that the quoter is an authorized distributor for all the manufacturer s products. This letter must be on the manufacturer s letterhead and contain the signature of an authorized official for the manufacturer. (ix) The provision at FAR 52.212-2, Evaluation -- Commercial Products and Commercial Services (NOV 2021), applies to this solicitation. FAR 52.212-2 Addendum / Replacement: (a) The Government will award a contract resulting from this solicitation to the responsive and responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price, and other factors considered. The following factors shall be used to evaluate offers: Technical acceptability shall be established by review of each submitted quote, attachments, and/or information by the designated technical evaluators and verification that any brand name or equal to items" at a minimum meet all the salient characteristics outlined in this solicitation. No other rating or quantitative value other than acceptable or unacceptable will be assigned. Submissions to this solicitation must show clear, compelling, and convincing evidence that equal-to items meet all the salient characteristics. Offers that include any items that are not determined as Brand Name or Equal shall result in an unacceptable offer. Award will be made to the offer that meets all minimum requirements and provides the lowest price. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified with a minimum of at least sixty days, shall result in a binding contract without further action by either party. Before the offer s specified expiration time, the Government may accept an offer (or part of an offer), whether there are negotiations after its receipt unless a written notice of withdrawal is received before award. (End of Provision) (x) Must include a completed copy of the provision at 52.212-3 -- Offeror Representations and Certifications -- Commercial Products, with this solicitation or ensure SAM.gov is updated with current information. 52.237-1 SITE VISIT (APR 1984) Offerors or quoters are urged and expected to inspect the site where services are to be performed and to satisfy themselves regarding all general and local conditions that may affect the cost of contract performance, to the extent that the information is reasonably obtainable. In no event shall failure to inspect the site constitute grounds for a claim after contract award. (End of provision) (xi) The clause at 52.212-4, Contract Terms and Conditions -- Commercial Products and Commercial Services, applies to this acquisition. 52.212-4 CONTRACT TERMS AND CONDITIONS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2023) (a) Inspection/Acceptance. The Contractor shall only tender for acceptance those items that conform to the requirements of this contract. The Government reserves the right to inspect or test any supplies or services that have been tendered for acceptance. The Government may require repair or replacement of nonconforming supplies or reperformance of nonconforming services at no increase in contract price. If repair/replacement or reperformance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights- (1) Within a reasonable time after the defect was discovered or should have been discovered; and (2) Before any substantial change occurs in the condition of the item, unless the change is due to the defect in the item. (b) Assignment. The Contractor or its assignee may assign its rights to receive payment due as a result of performance of this contract to a bank, trust company, or other financing institution, including any Federal lending agency in accordance with the Assignment of Claims Act ( 31 U.S.C. 3727). However, when a third party makes payment (e.g., use of the Governmentwide commercial purchase card), the Contractor may not assign its rights to receive payment under this contract. (c) Changes. Changes in the terms and conditions of this contract may be made only by written agreement of the parties. (d) Disputes. This contract is subject to 41 U.S.C. chapter 71, Contract Disputes. Failure of the parties to this contract to reach agreement on any request for equitable adjustment, claim, appeal or action arising under or relating to this contract shall be a dispute to be resolved in accordance with the clause at Federal Acquisition Regulation (FAR) 52.233-1, Disputes, which is incorporated herein by reference. The Contractor shall proceed diligently with performance of this contract, pending final resolution of any dispute arising under the contract. (e) Definitions. The clause at FAR 52.202-1, Definitions, is incorporated herein by reference. (f) Excusable delays. The Contractor shall be liable for default unless nonperformance is caused by an occurrence beyond the reasonable control of the Contractor and without its fault or negligence such as, acts of God or the public enemy, acts of the Government in either its sovereign or contractual capacity, fires, floods, epidemics, quarantine restrictions, strikes, unusually severe weather, and delays of common carriers. The Contractor shall notify the Contracting Officer in writing as soon as it is reasonably possible after the commencement of any excusable delay, setting forth the full particulars in connection therewith, shall remedy such occurrence with all reasonable dispatch, and shall promptly give written notice to the Contracting Officer of the cessation of such occurrence. (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include- (i) Name and address of the Contractor; (ii) Invoice date and number; (iii) Contract number, line item number and, if applicable, the order number; (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered; (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading; (vi) Terms of any discount for prompt payment offered; (vii) Name and address of official to whom payment is to be sent; (viii) Name, title, and phone number of person to notify in event of defective invoice; and (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract. (x) Electronic funds transfer (EFT) banking information. (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract. (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer-System for Award Management, or 52.232-34, Payment by Electronic Funds Transfer-Other Than System for Award Management), or applicable agency procedures. (C) EFT banking information is not required if the Government waived the requirement to pay by EFT. (2) Invoices will be handled in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR Part 1315. (h) Patent indemnity. The Contractor shall indemnify the Government and its officers, employees and agents against liability, including costs, for actual or alleged direct or contributory infringement of, or inducement to infringe, any United States or foreign patent, trademark or copyright, arising out of the performance of this contract, provided the Contractor is reasonably notified of such claims and proceedings. (i) Payment.- (1) Items accepted. Payment shall be made for items accepted by the Government that have been delivered to the delivery destinations set forth in this contract. (2) Prompt payment. The Government will make payment in accordance with the Prompt Payment Act ( 31 U.S.C.3903) and prompt payment regulations at 5 CFR Part 1315. (3) Electronic Funds Transfer (EFT). If the Government makes payment by EFT, see 52.212-5(b) for the appropriate EFT clause. (4) Discount. In connection with any discount offered for early payment, time shall be computed from the date of the invoice. For the purpose of computing the discount earned, payment shall be considered to have been made on the date which appears on the payment check or the specified payment date if an electronic funds transfer payment is made. (5) Overpayments. If the Contractor becomes aware of a duplicate contract financing or invoice payment or that the Government has otherwise overpaid on a contract financing or invoice payment, the Contractor shall- (i) Remit the overpayment amount to the payment office cited in the contract along with a description of the overpayment including the- (A) Circumstances of the overpayment (e.g., duplicate payment, erroneous payment, liquidation errors, date(s) of overpayment); (B) Affected contract number and delivery order number, if applicable; (C) Affected line item or subline item, if applicable; and (D) Contractor point of contact. (ii) Provide a copy of the remittance and supporting documentation to the Contracting Officer. (6) Interest. (i) All amounts that become payable by the Contractor to the Government under this contract shall bear simple interest from the date due until paid unless paid within 30 days of becoming due. The interest rate shall be the interest rate established by the Secretary of the Treasury as provided in 41 U.S.C. 7109, which is applicable to the period in which the amount becomes due, as provided in (i)(6)(v) of this clause, and then at the rate applicable for each six-month period as fixed by the Secretary until the amount is paid. (ii) The Government may issue a demand for payment to the Contractor upon finding a debt is due under the contract. (iii) Final decisions. The Contracting Officer will issue a final decision as required by 33.211 if (A) The Contracting Officer and the Contractor are unable to reach agreement on the existence or amount of a debt within 30 days; (B) The Contractor fails to liquidate a debt previously demanded by the Contracting Officer within the timeline specified in the demand for payment unless the amounts were not repaid because the Contractor has requested an installment payment agreement; or (C) The Contractor requests a deferment of collection on a debt previously demanded by the Contracting Officer (see 32.607-2). (iv) If a demand for payment was previously issued for the debt, the demand for payment included in the final decision shall identify the same due date as the original demand for payment. (v) Amounts shall be due at the earliest of the following dates: (A) The date fixed under this contract. (B) The date of the first written demand for payment, including any demand for payment resulting from a default termination. (vi) The interest charge shall be computed for the actual number of calendar days involved beginning on the due date and ending on- (A) The date on which the designated office receives payment from the Contractor; (B) The date of issuance of a Government check to the Contractor from which an amount otherwise payable has been withheld as a credit against the contract debt; or (C) The date on which an amount withheld and applied to the contract debt would otherwise have become payable to the Contractor. (vii) The interest charge made under this clause may be reduced under the procedures prescribed in FAR 32.608-2 in effect on the date of this contract. (j) Risk of loss. Unless the contract specifically provides otherwise, risk of loss or damage to the supplies provided under this contract shall remain with the Contractor until, and shall pass to the Government upon: (1) Delivery of the supplies to a carrier, if transportation is f.o.b. origin; or (2) Delivery of the supplies to the Government at the destination specified in the contract, if transportation is f.o.b. destination. (k) Taxes. The contract price includes all applicable Federal, State, and local taxes and duties. (l) Termination for the Government s convenience. The Government reserves the right to terminate this contract, or any part hereof, for its sole convenience. In the event of such termination, the Contractor shall immediately stop all work hereunder and shall immediately cause any and all of its suppliers and subcontractors to cease work. Subject to the terms of this contract, the Contractor shall be paid a percentage of the contract price reflecting the percentage of the work performed prior to the notice of termination, plus reasonable charges the Contractor can demonstrate to the satisfaction of the Government using its standard record keeping system, have resulted from the termination. The Contractor shall not be required to comply with the cost accounting standards or contract cost principles for this purpose. This paragraph does not give the Government any right to audit the Contractor s records. The Contractor shall not be paid for any work performed or costs incurred which reasonably could have been avoided. (m) Termination for cause. The Government may terminate this contract, or any part hereof, for cause in the event of any default by the Contractor, or if the Contractor fails to comply with any contract terms and conditions, or fails to provide the Government, upon request, with adequate assurances of future performance. In the event of termination for cause, the Government shall not be liable to the Contractor for any amount for supplies or services not accepted, and the Contractor shall be liable to the Government for any and all rights and remedies provided by law. If it is determined that the Government improperly terminated this contract for default, such termination shall be deemed a termination for convenience. (n) Title. Unless specified elsewhere in this contract, title to items furnished under this contract shall pass to the Government upon acceptance, regardless of when or where the Government takes physical possession. (o) Warranty. The Contractor warrants and implies that the items delivered hereunder are merchantable and fit for use for the particular purpose described in this contract. (p) Limitation of liability. Except as otherwise provided by an express warranty, the Contractor will not be liable to the Government for consequential damages resulting from any defect or deficiencies in accepted items. (q) Other compliances. The Contractor shall comply with all applicable Federal, State and local laws, executive orders, rules and regulations applicable to its performance under this contract. (r) Compliance with laws unique to Government contracts. The Contractor agrees to comply with 31 U.S.C. 1352 relating to limitations on the use of appropriated funds to influence certain Federal contracts; 18 U.S.C. 431 relating to officials not to benefit; 40 U.S.C. chapter 37, Contract Work Hours and Safety Standards; 41 U.S.C. chapter 87, Kickbacks; 49 U.S.C. 40118, Fly American; and 41 U.S.C. chapter 21 relating to procurement integrity. (s) Order of precedence. Any inconsistencies in this solicitation or contract shall be resolved by giving precedence in the following order: (1) The schedule of supplies/services. (2) The Assignments, Disputes, Payments, Invoice, Other Compliances, Compliance with Laws Unique to Government Contracts, and Unauthorized Obligations paragraphs of this clause; (3) The clause at 52.212-5. (4) Addenda to this solicitation or contract, including any license agreements for computer software. (5) Solicitation provisions if this is a solicitation. (6) Other paragraphs of this clause. (7) The Standard Form 1449. (8) Other documents, exhibits, and attachments. (9) The specification. (t) [Reserved] (u) Unauthorized Obligations. (1) Except as stated in paragraph (u)(2) of this clause, when any supply or service acquired under this contract is subject to any End User License Agreement (EULA), Terms of Service (TOS), or similar legal instrument or agreement, that includes any clause requiring the Government to indemnify the Contractor or any person or entity for damages, costs, fees, or any other loss or liability that would create an Anti-Deficiency Act violation (31 U.S.C. 1341), the following shall govern: (i) Any such clause is unenforceable against the Government. (ii) Neither the Government nor any Government authorized end user shall be deemed to have agreed to such clause by virtue of it appearing in the EULA, TOS, or similar legal instrument or agreement. If the EULA, TOS, or similar legal instrument or agreement is invoked through an "I agree" click box or other comparable mechanism (e.g., "click-wrap" or "browse-wrap" agreements), execution does not bind the Government or any Government authorized end user to such clause. (iii) Any such clause is deemed to be stricken from the EULA, TOS, or similar legal instrument or agreement. (2) Paragraph (u)(1) of this clause does not apply to indemnification by the Government that is expressly authorized by statute and specifically authorized under applicable agency regulations and procedures. (v) Incorporation by reference. The Contractor s representations and certifications, including those completed electronically via the System for Award Management (SAM), are incorporated by reference into the contract. (End of Clause) (xii) The clause at 52.212-5, Contract Terms and Conditions Required To Implement Statutes Or Executive Orders -- Commercial Products, applies to this acquisition. 52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVE ORDERS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (DEC 2023) (a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: (1) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (Jan 2017) (section 743 of Division E, Title VII, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L. 113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)). (2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities (Dec 2023) (Section 1634 of Pub. L. 115-91). (3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (Nov 2021) (Section 889(a)(1)(A) of Pub. L. 115-232). (4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015). (5) 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Mar 2023) (31 U.S.C. 3903 and 10 U.S.C. 3801). (6)   52.233-3, Protest After Award (Aug 1996) (31 U.S.C. 3553). (7)   52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004) (Public Laws 108-77 and 108-78 (19 U.S.C. 3805 note)). (b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [X] (1) 52.203-6, Restrictions on Subcontractor Sales to the Government (Jun 2020), with Alternate I (Nov 2021) (41 U.S.C. 4704 and 10 U.S.C. 4655). [] (2) 52.203-13, Contractor Code of Business Ethics and Conduct (Nov 2021) (41 U.S.C. 3509)). [] (3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of 2009 (Jun 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of 2009.) [] (4) 52.203-17, Contractor Employee Whistleblower Rights (Nov 2023) (41 U.S.C. 4712); this clause does not apply to contracts of DoD, NASA, the Coast Guard, or applicable elements of the intelligence community see FAR 3.900(a). [X] (5) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (Jun 2020) (Pub. L. 109-282) (31 U.S.C. 6101 note). [] (6) [Reserved]. [] (7) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). [] (8) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub. L. 111-117, section 743 of Div. C). [X] (9) 52.204-27, Prohibition on a ByteDance Covered Application (Jun 2023) (Section 102 of Division R of Pub. L. 117-328). [] (10) 52.204-28, Federal Acquisition Supply Chain Security Act Orders Federal Supply Schedules, Governmentwide Acquisition Contracts, and Multi-Agency Contracts. (Dec 2023) (Pub. L. 115 390, title II). [] (11) (i) 52.204-30, Federal Acquisition Supply Chain Security Act Orders Prohibition. (Dec 2023) (Pub. L. 115 390, title II). [] (ii) Alternate I (Dec 2023) of 52.204 30. [] (12) 52.209-6, Protecting the Government s Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (Nov 2021) (31 U.S.C. 6101 note). [] (13) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (Oct 2018) (41 U.S.C. 2313). [] (14) [Reserved]. [] (15) 52.219-3, Notice of HUBZone Set-Aside or Sole-Source Award (Oct 2022) (15 U.S.C. 657a). [] (16) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (Oct 2022) (if the offeror elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a). [] (17) [Reserved] [] (18) (i) 52.219-6, Notice of Total Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [] (ii) Alternate I (Mar 2020) of 52.219-6. [] (19) (i) 52.219-7, Notice of Partial Small Business Set-Aside (Nov 2020) (15 U.S.C. 644). [] (ii) Alternate I (Mar 2020) of 52.219-7. [X] (20) 52.219-8, Utilization of Small Business Concerns (Sep 2023) (15 U.S.C. 637(d)(2) and (3)). [] (21) (i) 52.219-9, Small Business Subcontracting Plan (Sep 2023) (15 U.S.C. 637(d)(4)). [] (ii) Alternate I (Nov 2016) of 52.219-9. [] (iii) Alternate II (Nov 2016) of 52.219-9. [] (iv) Alternate III (Jun 2020) of 52.219-9. [] (v) Alternate IV (Sep 2023) of 52.219-9. [] (22) (i) 52.219-13, Notice of Set-Aside of Orders (Mar 2020) (15 U.S.C. 644(r)). [] (ii) Alternate I (Mar 2020) of 52.219-13. [] (23) 52.219-14, Limitations on Subcontracting (Oct 2022) (15 U.S.C. 637s). [] (24) 52.219-16, Liquidated Damages Subcontracting Plan (Sep 2021) (15 U.S.C. 637(d)(4)(F)(i)). [] (25) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (Oct 2022) (15 U.S.C. 657f). [X] (26) (i) 52.219-28, Post Award Small Business Program Rerepresentation (Sep 2023) (15 U.S.C. 632(a)(2)). [] (ii) Alternate I (Mar 2020) of 52.219-28. [] (27) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women-Owned Small Business Concerns (Oct 2022) (15 U.S.C. 637(m)). [] (28) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (Oct 2022) (15 U.S.C. 637(m)). [] (29) 52.219-32, Orders Issued Directly Under Small Business Reserves (Mar 2020) (15 U.S.C. 644(r)). [] (30) 52.219-33, Nonmanufacturer Rule (Sep 2021) (15U.S.C. 637(a)(17)). [] (31) 52.222-3, Convict Labor (Jun 2003) (E.O.11755). [X] (32) 52.222-19, Child Labor-Cooperation with Authorities and Remedies (Nov 2023). [X] (33) 52.222-21, Prohibition of Segregated Facilities (Apr 2015). [X] (34) (i) 52.222-26, Equal Opportuni...