Inactive

Presolicitation Notice Presolicitation Notice Page 9 of 9 Presolicitation Notice Page 1 of 9 REQUEST FOR INFORMATION: 36C262-22-Q-0370 THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATI... Presolicitation Notice Presolicitation Notice Page 9 of 9 Presolicitation Notice Page 1 of 9 REQUEST FOR INFORMATION: 36C262-22-Q-0370 THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). This is not a solicitation announcement.  This is sources sought synopsis only for market research purposes ONLY. The purpose of this synopsis is to gain knowledge of potential qualified Service-Disabled Veteran Owned Small Businesses (SDVOSB) or Veteran Owned Small Businesses (VOSB) for relative to NAICS 339112 sources (size standard of 1000 employees). Responses to this synopsis will be used by the Government to make appropriate acquisition decisions. After review of the responses to this source sought synopsis, a solicitation announcement may be published in the FedBizOpps or GSA eBuy websites. Responses to this sources sought synopsis are not considered adequate responses to the solicitation announcement. All interested offerors will have to respond to the solicitation announcement in addition to responding to this source sought announcement.  The Department of Veterans Affairs, Network 22 Contracts Office, is seeking sources to provide: KaVo OP3D 2D Panoramic X-ray for the VA Los Angeles Healthcare System. If you are interested and can provide the required supplies, please provide the requested information as indicated below. Responses to this notice should include your: DUNS Number, Size of business, Company name, Address, Point of contact, Pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer or distributor of the items being referenced above (or equivalent product/solution)? What is the manufacturing country of origin of these items? (4) If you re a small business and you are an authorized distributor/reseller for the items identified above (or equivalent product/solution), do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (5) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract type and number. (6) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the referenced items/solutions available on your schedule/contract? (7) Please provide general pricing for your products/solutions for market research purposes. (8) Please submit your capabilities regarding the salient characteristics being provided and any information pertaining to brand name or equal to items to establish capabilities for planning purposes? Responses to this notice shall be submitted via email to: John.harrison2@va.gov Telephone responses shall not be accepted. Responses must be received no later than Wednesday, 02/09/2022 at 11:00 AM PST. If a solicitation is issued it shall be announced later, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation. Please provide unofficial pricing. Notice: No remanufactures or gray market items/ supplies will not be acceptable. Interested parties of RFI must be an authorized reseller, distributor, or dealer of the O.E.M. (Original Equipment Manufacturer). Verification can be provided by an authorization letter or other documents from the OEM. Equipment shall be in accordance with the OEM terms and conditions. Salient Characteristics 805-9530 1 KaVo Focus 85" Reach X-ray 4 EA 805.6300 2 KaVo OP3D 2D Panoramic 1 EA 1.013.2926 3 KaVo IXS sensor kit Size 1 and Size 2 4 EA 4 Installation 1 JB TOTAL COST: $ PHYSICAL CHARACTERISTICS: Equipment must have the physical characteristics to enable the government to perform the capabilities: Kavo OP3D 2D Panoramic qty: 1 a) Advanced panoramic imaging system b) Automatic Dose Control (ADC) ensures accurate dosing and detailed images c) Multilayer pan d) Easy, accurate patient positioning e) Focal Spot: 0.5 mm, IEC 336 f) Tube Voltage: 57-90KV g) Tube Current 3.2-16 mA h) HU Capacity: 35kJ, 49000 HU i) Minimum Total Filtration: 3.2 mmAI j) Image Detector: CMOS k) Sensor Pixel Size: 100 m l) Image Pixel Size: 100 m m) Scan Exposure Time: 8.6-16.1 seconds n) Image Field Height: 148 mm o) Imaging Program: Standard, Pediatric, Ortho Zone, Orthogonal, Wide Arch, Lateral TMJ, PA TMJ, Maxillary Sinus, Bitewing p) Weight: 440 lbs q) Part number: 0.805.6300 Kavo Focus 85 Reach X-Ray qty: 4 a) Efficient exposure ensures successful imaging while minimizing patient dose b) ADM (Anti-Drift Mechanism) eliminates drifting and the need for repositioning c) Built in automatic dose display (DAP_ d) Attractive design e) Pre-programmed settings f) Generator Constant Potential: High Voltage DC, 100-200 kHz g) Tube Voltage: 60 or 70 kV h) Tube Current: 7mA i) Focal Spot: 0.7 mm to IEC 60336 j) Total Filtration: 2.0 mm Al (70 kV) k) Line Voltage: 115 / 230 VAC +/- 10 %, 60/50 Hz l) Exposure Time Range: 0.02-3.2 seconds m) Reach: 85 n) Weight: 66 lbs o) Beam limiting cone dimensions: round diameter 2.36 in, rectangular 1.38x1.77 in p) SSD: Standard code 9 in q) Part number: 0.805.9530 Kavo IXS sensor kit Size 1 and Size 2 qty: 4 a) The new and improved sensors with three times more resistant to damage or functional failure b) It handles double the biteforce without cosmetic damage c) Includes SimplySmart has smart IoT capabilities such as direct download calibration files, automated software updates and proactive sensor health monitoring. d) It designed to easily integrate with the imaging software. e) Part number: 1.013.2926 FUNCTIONAL AND PERFORMANCE CHARACTERISTICS: Equipment must provide the functional and performance capability as listed above in section in above. TRAINING: Contractor is to provide a one-time training at installation of equipment (if applicable). Government will not require additional training. WARRANTY OF EQUIPMENT: Government requirement for standard manufacturer industry warranty term. Government does not accept extended warranty, which requires advance payment. PERFORMANCE: All items to be delivered and installed after receipt of purchase order but not earlier than 02/22/2022 but not later than 3/10/2022. PLACE OF DELIVERY: VA Ventura CBOC 5250 Ralston St, Ventura, CA 93003