Inactive

This is a Sources Sought only. The Department of Veterans Affairs (VA) Network Contracting Office (NCO) 21 is performing market research to determine if there are any vendors with economic status of S... This is a Sources Sought only. The Department of Veterans Affairs (VA) Network Contracting Office (NCO) 21 is performing market research to determine if there are any vendors with economic status of Service-Disabled Veteran Owned, Veteran Owned, Women Owned, and other Small Businesses that can provide the required Brand Name or Equal requirement for Cancer Treatment Laboratory Equipment to determine their availability, capability and adequacy. Responses to this Sources Sought will be used for market research purposes. This requirement is for the Veterans Integrated Service Network (VISN 21) procurement to provide the Cancer Treatment Laboratory Equipment to the Medical Treatment Facilities at Palo Alto. There is no solicitation document as this time. The NAICS is 334516 with Small Business size of 1,000 employees. NOTE: Please ensure that System for Award Management (SAM) (www.sam.gov) indicates this NAICS code if you are interested in the requirement. If you are responding as an SD/VOSB vendor, you must be verified on the Vendor Information Pages (VIP) at https://www.vip.vetbiz.gov/ AND your verification must indicate this NAICS code. Only firms interested and capable should send their information and/or capability statement and any questions by email to Edward.hunter@va.gov no later than 12:00 PM Pacific Standard Time, September 8, 2023. If interested, please provide the following information: Name of Company Point of Contact Name, phone number, and email address SAMS Unique Entity ID Number Socio-economic status such as Service-Disabled Veteran Owned Small Business, VOSB, Women-Owned Small Business, etc. should be included. SDVOSB/VOSB status and NAICS will be verified using VIP. Capability statement(s) Authorized Distributor Memo on Manufacturers letterhead. Indicate if any other relevant information such as FSS or GSA contract availability. DISCLAIMER This Sources Sought notice is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this request that is marked proprietary will be handled accordingly. The Government will not compensate an offeror for providing information in response to this sources sought. Furthermore, the Government reserves the right to cancel this requirement at its discretion. This is simply a source sought notice. See attached draft Saliant Characteristics: Power and telecom cable management solution for top-of-flooring installation, Or Equal General A power management wireway segments that offer a wide array of power/AV/telecom connectivity, to be placed in the central check-in areas. Warranty Requirements Manufacturer must offer a minimum 5-year warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.) Manufacturer certifies that products meet or exceed applicable testing such as UL Subject 111 standards (Multi-outlet assemblies) and identified with the ETL Listed Mark. Environmental Features Product shall be constructed free of environmentally hazardous materials such as PVC, CFC, solvent-based adhesives, heavy metals (chrome, lead and mercury) and benzene. Product shall be constructed free of environmentally hazardous processes such as those that produce VOC s and deplete ozone. Product shall maximize recycled and recyclable materials. Shipping packing materials shall be reusable and /or recyclable. Product shall be tested for durability and vandal resistance. Dimensions and Features Wireway segments - ON-3.7-072-AL, 01-3.7-ON-WW-072-AL, ON-3.7-EC2-AL, PM-MODC-144, PM-RECM-DP-1-5, and PM-JUMP-066 3.7 segments minimum overall dimension 72 W x 9 D with field-cut option to fit the required length and combined arrangement necessary. 2 available finishes options graphite powder coat (GR) and clear anodized aluminum (AL) Wireway segment component shell include extruded aluminum bottom track and top cap, end components, wire management clips, duplex receptacle and telecom device, concrete screws, and drill bit 3.7 On-Floor (ON) 72" top cap, bottom track & 2 side ramps. Bottom track to be anchor to slab and secures side transition ramps, and top cap snaps into bottom track. 3.7 On-Floor 72" wireway for multi-channel setups 3.7 wireway On-Floor (ON) steel end component w/ Graphite finish for double-tracked 3.7 wireway 144" 8-wire/4-circuit modular power infeed flex conduit A minimum of four 20Amp NEMA 5-20R duplex receptacles and black ABS plastic cover with mounting screws, duplex receptacle, and keystone telecom opening. Modular connections with multiple receptacle units can be connected using modular jumper and power in feed cables. Each device shall come with one angled TC-UM03-BK modules from Hubbell that accommodate up to two keystone-sized connectors. 3.7 wireway 8-wire/4-circuit modular power jumper for 66" on center devices Wireway segment accessory shall be available in 2 available finishes options: black (BK) and silver (SV) AW-1 - (5) 3.7 Power management wireway segments with (4) duplex receptacles and telecom device. Surface Materials Selected Finish options Wireway segments - Clear anodized aluminum (AL) Accessory Silver (SV) Power unit Black plastic cover All finishes shall be approved by VA interior designer before production. Miscellaneous Vendor/contractor require to field verify dimensions of built out clinic space to ensure sizing of cabinetry and coordination with the associated data & electrical ports on site. Vendor/contractor shall submit shop drawings for final VA approval. Oblong Mobil device charging stations, or Equal General Multiple size mobile charging stanchions with mount receptacles and graphic display, to be placed in public waiting areas. Warranty Requirements Manufacturer must offer a 12-month warranty that product is free from defects in materials and workmanship (includes shipping, parts and labor for the repair or replacement of defective item.) Manufacturer certifies that products meet or exceed applicable ANSI/BIFMA standards and testing. Environmental Features Product shall be constructed free of environmentally hazardous materials such as PVC, CFC, solvent-based adhesives, heavy metals (chrome, lead and mercury) and benzene. Product shall be constructed free of environmentally hazardous processes such as those that produce VOC s and deplete ozone. Product shall maximize recycled and recyclable materials. Shipping packing materials shall be reusable and /or recyclable. Dimensions and Features Charging stations - M-100-10093, M-100-10140-LAX, M-100-10140-COR, M-100-10048, M-100-10062, and M-100-10108, ART/DES, M-013-10003-1 Charging stanchions minimum overall dimension 20 - 20.5 W x 8.5 - 9 D x 41 -42 & 61 -62 H Charging stanchions shall be constructed with stainless steel, or cold pressed steel for powder coating in custom colors. Oblong, Front mount receptacles, with 110VAC duplex outlets, graphic display, and elliptical shelf. Two available finish options graphite powder coat and clear anodized aluminum. Charging stanchion component shell include large stainless steel base plate, soft power cord, USB multi cable with secured bracket, top and front vinyl graphic panel, and shelf. Large Stainless Steel base plate for portable self-standing power stanchion with 10 Ft. PVC power cable Soft power cord (Replaces Std. BX Whip) Multi cable with secured bracket - secures cable to charging receptacle to provides USB charging cable for iPhones, iPods, Samsung Androids, Bluetooth Headsets, Blackberry 30pin, 8 pin Lightning, Micro USB, USB3.0 Mic. Top standard graphic artwork panel - Vinyl adhesive graphic display to be created in various colors as per designated VA Hospital color coded Floors / Departments. Overall Dimensions 9 W x 10 H x .0.375 D Charging station shall offer option for custom graphic finish base front. One side elliptical shelf with clear acrylic, plastic, or solid surface finish option AM-1 62 H Oblong, Front mount receptacles mobile charging station with 110VAC duplex outlets, graphic display, and elliptical shelf. AM-2 - 42 H Oblong, Front mount receptacles mobile charging station with 110VAC duplex outlets, graphic display, and elliptical shelf. Surface Materials Selected Finish options Charging stanchions - graphite powder coat aluminum Accessory Clear Power unit / Cable Black All finishes shall be approved by VA interior designer before production. Miscellaneous Vendor/contractor require to field verify dimensions of built out clinic space to ensure sizing of cabinetry and coordination with the associated data & electrical ports on site. Vendor/contractor shall submit shop drawings for final VA approval.