Inactive

36C25720Q0654 Page 1 of Page 48 of 48 Page 1 of STATEMENT OF WORK Dental Services Series III Straight Drill Introduction/Background The Central Texas Veterans Health Care System (CTVHCS) requires the ... 36C25720Q0654 Page 1 of Page 48 of 48 Page 1 of STATEMENT OF WORK Dental Services Series III Straight Drill Introduction/Background The Central Texas Veterans Health Care System (CTVHCS) requires the purchase of seven (7) Series III Straight Drills for the Dental Clinic of CTVHCS located at 1901 S. Veterans Memorial Drive, Temple, Texas 76504. This is a modular surgical system, capable of cutting both teeth and bone. The system must be rated for office based and operating room surgical applications. Objectives System must be steam sterilizable. System components must be modular, allowing for system components to be changed during use within a sterile environment. System must allow the use of two sets of sterile components to be user controlled within sterile environment. System must also allow the two sets of sterile components to be controlled by the user from one power control console. Availability of one foot controlled only motor; one lever-arm, finger-controlled motor; and one membrane switched, finger-controlled motor. All motors must also have the capability of foot control activation. Handheld motors must be two speed, and user controlled. Motor(s), capable 24,000 and 70,000 rpm respectively, as desired with appropriate modular drill. User controlled, variable speed foot control; expandable to tandem foot control operation. High speed quick connect drill, with a 70,000-rpm nominal speed rating and be user switchable to a 24,000-rpm nominal speed rating. Availability of modular reciprocating saws, oscillating saws and contra angled attachments suitable for dental implants. Scope of Work The vendor will deliver seven (7) Series III Straight Drills to the Dental Clinic located at 1901 S. Veterans Memorial Drive, Temple, Texas 76504. All system components, such as those listed in item 3., above, are uniquely compatible with the manufactures power control console only Security C&A requirements do not apply, and a security Accreditation Package is not required