Inactive

DEPARTMENT OF VETERANS AFFAIRS NETWORK CONTRACTING OFFICE (NCO) 16 REQUEST FOR INFORMATION 36C25621Q1040 The Advolution 2710 The ADVOLUTION 2710 312AH Description The Advolution 2710 / UHR 70-1700 (Mo... DEPARTMENT OF VETERANS AFFAIRS NETWORK CONTRACTING OFFICE (NCO) 16 REQUEST FOR INFORMATION 36C25621Q1040 The Advolution 2710 The ADVOLUTION 2710 312AH Description The Advolution 2710 / UHR 70-1700 (Model numbers 56422000, 56422001 & 56411002) use the disk type burnishing system. The pad driver assembly is directly attached to a single 3.25hp 36v DC permanent magnet motor. The burnishing deck is raised and lowered by a horizontally mounted electric lift actuator motor. The operation of the machine s burnishing functions are activated when the operator presses the main I/O Panel s pad drive raise/lower switch (EE). NOTE: See the Electrical System Advolution programming modes section of this manual for more detailed operation and instructions to change the burnishing pad pressure setting. Technical Specifications 6 Each with UV Light Kit REQUESTED RESPONSES: The intent of this Request for Information is to establish sources to define the procurement strategy (e.g set-aside, sole source, unrestricted) for a solicitation that VA intends to post in the near future. Interested contractors are requested to respond in accordance with the following: Please respond to this RFI if you can provide the exact brand name products listed in the table in the background section above. In the response please cite your business size status. If you have an existing GSA or VA, Federal Supply Schedule contract, please include the contract details in your response. Please respond to this RFI if you can provide supplies that can be determined EQUIVALENT to the products listed in the table in the background section above. Please provide details on the proposed EQUIVALENT products such as Manufacturer Name, Part Number, and Description. If you have an existing GSA or VA, Federal Supply Schedule contract, please include the contract details in your response. Please note that VA is particularly interested in determining the availability of Small Business Manufacturers. If your company is a small business manufacturer of similar items, please respond to this RFI. CONTACT INFORMATION AND RESPONSE DUE DATE: Please email all responses to kever.swafford@va.gov. Please respond to this RFI no later than June 10, 2020 @2:30 PM CST DISCLAIMER: This RFI is issued solely for informational and planning purposes and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Department of Veterans Affairs to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this RFI.