6530--Custom Pharmacy cabinetry ScriptPro automation system
Page 2 of 2 DEPARTMENT OF VETERANS AFFAIRS VETERANS INTEGRATED SERVICE NETWORK (VISN) 16 G.V. SONNY MONTGOMERY VETERANS HEALTHCARE SYSTEM REQUEST FOR INFORMATION 36C25621Q0134 REQUESTED RESPONSES: The... Page 2 of 2 DEPARTMENT OF VETERANS AFFAIRS VETERANS INTEGRATED SERVICE NETWORK (VISN) 16 G.V. SONNY MONTGOMERY VETERANS HEALTHCARE SYSTEM REQUEST FOR INFORMATION 36C25621Q0134 REQUESTED RESPONSES: The intent of this Request for Information is to establish sources in order to define the procurement strategy. Interested contractors are requested to respond in accordance with the following Please respond to this RFI if you are capable of providing the brand name or equivalent products listed in the SOW found in the background section below. In the response please cite business size status. POTENTIAL SOURCES SHALL PROVIDE THE FOLLOWING INFORMATION IN THEIR RESPONSE: 1) Company name, address, phone number, primary contact(s), e-mail address, NAICS code(s), business size (i.e., small/large) and DUNS Number. 2) Provide a Statement of Capability that demonstrates the offeror's past performance in providing these types of supplies. Please include the following: (a) examples of prior completed Government contracts, references, and other related information. CONTACT INFORMATION AND RESPONSE DUE DATE: Please email all responses to William.Shaver@va.gov. Please respond to this RFI no later than 08:00 Central Standard Time on Wednesday, November 4, 2020. DISCLAIMER: This RFI is issued solely for informational and planning purposes and does not constitute a solicitation. Responses to this notice are not offers and cannot be accepted by the Department of Veterans Affairs to form a binding contract. Respondents are solely responsible for all expenses associated with responding to this RFI. BACKGROUND: (also provided as an attachment see: Attachment Background Section) Pharmacy Renovation Project Check In Area G.V. (Sonny) Montgomery VAMC Jackson, Mississippi Project: Pharmacy Renovation Project Issue Date: Oct 2020 Total Quantity: 1 Finish Sample Required if Checked Manufacturer Certified Installation Required if Checked Item Name: Check In Windows Brand Name or Equal: Modular Pharmacy Solutions Width: Assorted Depth: Assorted Height: Assorted (Use drawing package to identify dimensions) Salient Characteristics: Pharmacy patient check-in functions as the transaction window station for prescription intake. One window is designed to have 34 high ADA working countertop with casework below providing space to hold equipment and supplies. Casework is designed with the following components: solid surface countertop, under counter printer drawer storage, knee space for 4 workstations to intake orders, and prewired modular hospital grade duplex outlets and data boxes. Above each check in workstation is a Lexan transaction window with a no draft speak thru tube. Lexan is an amorphous engineering thermoplastic with high impact strength and outstanding clarity. Each check in window workstation is separated by a modular wall to provide patient privacy. Check In area to have 3 modular walls 8 feet tall and 80 long. Overall dimensions: SEE DRAWINGS. GENERAL REQUIREMENTS FOR MODULAR MILLWORK All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes. Cabinets constructed of HPL over a ½ minimal thickness low VOC substrate with all edges sealed with matching edge- band. Cabinet interiors fully HPL or LPL lined with no exposed substrate. Warranty- Limited Lifetime To include minimum of the following specifications: A component-based line of cabinetry and coordinating work tops to be used in labs and pharmacy spaces to supply a built- in look while maintaining the quality and flexibility of a modular approach. A wide variety of fully modular cabinet components available for upper and lower storage. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare. Full extension steel ball bearing drawer glides. Work top surface uses Solid Surface material. ADDITIONAL REQUIREMENTS ARE AS FOLLOWS: Materials: *Core material shall be particle board conforming to CS 236-66 45 pound, B density, Class 1 of Type 1 *Laminated plastic for general construction shall be 1/32 or 1/16 thick high-pressure type *All top, side and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finish as selected for exposed surfaces. *Adhesive for laminate shall be urea-formaldehyde resin free. *Edge moldings shall be PVC edge band and appear on all edges of the casework that are visibly exposed. Molding shall be the same thickness as shelf when on shelf, counter molding shall be 1-1/4 wide and flush with worksurface. *Shelving shall be 3/4" thick core with laminate on both sides. *Casework shall be fabricated using flush construction methods with modern machinery. *Casework shall be delivered fully constructed and ready for installation. Each unit shall be self-supporting and permit relocation. The sharing of component parts to form a rigid, modular, free-standing assembly shall not be acceptable Features: *Unit shall be free standing with ability to anchor to floor or walls. *Unit shall have a non-adjustable bottom shelf that is the base of the cabinet positioned on top of the toe kick *Unit shall have a 4" toe kick. Drawers: *Drawer module inserts shall be individual modular units that are completely removable and relocatable without being disassembled. *Drawer suspension shall have full extension travel, full steel ball bearings of carbonized steel and a positive stop and lock-in closed position (self-closing drawer slides). *Doors and drawer fronts shall be a minimum of 13/16" thick with composed out of the same material as the cabinetry finished with high pressure laminate. Worksurfaces: *Countertop shall run the length of the end panels and be composed out of a solid surface material. Core shall be 1- 1/8" thick with 1/16" laminate finish. *Backsplash and returns shall be provided where shown on drawings. *All exposed edges shall be radiused ¼ . Electrical: *Units are prewired with electrical from the factory and support the data as required. All modular casework should be field verified prior to purchase/installation. Building contractor to pull wiring. Either construction or activation contractor to have licensed electrician make the connections from building to modular casework. *Electrical fixtures shall be Hospital Grade 20 amps, 120 volt, 3-wire polarized grounded duplex receptacles. *Grommet holes to be drilled on site after installation of equipment for proper coordination. Quality Assurance: *Manufacturer must have a minimum of 5 years experience in providing manufactured casework for similar types of projects. Manufacturer facility must be certified to premium grade by the AWI Quality Certification Program. *All pharmacy casework included in this specification shall be made by a pharmacy casework manufacturer who is a specialist in the design and manufacture of pharmacy casework and has in operation, a factory adequate in size, with facilities for and devoted to the manufacture of the equipment he or his distributor proposes to supply. This requirement is stated for the Owners protection to eliminate any divided responsibility and to ensure that all completed assemblies shall be in harmony and uniform in design, color, type of hardware, etc., for the completed facility/installation. *A minimum of five years experience in the design, sale, manufacture, shipping, and installation of the quality and type of pharmacy casework specified herein shall be required Finishes: *Countertop- Solid surface (Insert manufacturer/color). *Casing, shelves, end panels- Laminate (Insert manufacturer/color), with PVC edge banding to match laminate. Final finishes to be approved by X. GENERAL REQUIREMENTS FOR LEXAN TRANSACTION WINDOW WITH SPEAK TUBE The transaction window shall be Lexan (PC) Polycarbonate, non-opening, and the entire window frame shall be painted in accordance with AAMA Specification 603.8 with 6 clearance at the bottom. Lexan (PC) Polycarbonate is in compliance with stringent FDA and USP requirements. No draft speak thru tube shall be satin anodized aluminum 5-5/16 diameter. GENERAL REQUIREMENTS FOR MODULAR WALL AT CHECK IN WINDOWS Free standing wall panel 8 feet tall with polystyrene core. Vinyl covered gypsum board both sides of wall 3 thick composite sandwich panels, with outside and inside to be ½ class A fire-shield gypsum board with a vinyl finish Core shall be one pound density polystyrene laminated with a structural adhesive. The core shall have the following mechanical properties: shear strength(flatwise) 18-22 PSI; shear modulus (flatwise) 280-320 PSI; water absorption rate shall be less and 4%; and STC value 32 Insulated to a minimum of R-11 Every 4 will have an aluminum extruded post with snap cover to house all the electrical components All posts and window trim painted to match the wall covering 3 x3 steel tubes for support no baseplates Polystyrene Core shall have the following mechanical properties: Shear strength (flatwise) 18 -22 PSI Shear Modulus (flatwise) 280 - 320 PSI The water absorption rate shall be less than 4% STC Value Pharmacy Renovation Project Prescription Pick Up Area G.V. (Sonny) Montgomery VAMC Jackson, Mississippi Project: Pharmacy Renovation Project Issue Date: Oct 2020 Total Quantity: 1 Finish Sample Required if Checked Manufacturer Certified Installation Required if Checked Item Name: Prescription Pick Up Area Brand Name or Equal: Modular Pharmacy Solutions Width: Assorted Depth: Assorted Height: Assorted (Use drawing package to identify dimensions) Salient Characteristics: Pharmacy storage units and workstations at the Pick Up Area support the dispensing functions of the filled prescriptions to patients. Unit is designed to have working countertop with cabinetry below providing storage and space to hold equipment and supplies. Unit is designed with the following components: solid surface countertop, under counter storage and prewired modular hospital grade duplex outlets and data boxes. Solid Surface CTR top. On the Lobby side of the Prescription Pick Up Area, modular walls with a Lexan viewing window are used to create a private area for patient interaction and discussion at the dispensing window. Custom modular wall sizes and configuration are used to maximize privacy. Overall dimensions: SEE DRAWINGS. GENERAL REQUIREMENTS FOR MODULAR MILLWORK All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes. Cabinets constructed of HPL over a ½ minimal thickness low VOC substrate with all edges sealed with matching edge- band. Cabinet interiors fully HPL or LPL lined with no exposed substrate. Warranty- Limited Lifetime To include minimum of the following specifications: A component-based line of cabinetry and coordinating work tops to be used in labs and pharmacy spaces to supply a built- in look while maintaining the quality and flexibility of a modular approach. A wide variety of fully modular cabinet components available for upper and lower storage. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare. Work top surface uses Solid Surface material. Adjustable 4-way hinges. Adjustable height shelving, HPL surface on all sides of shelves and shelving unit ADDITIONAL REQUIREMENTS ARE AS FOLLOWS: Materials: *Core material shall be particle board conforming to CS 236-66 45 pound, B density, Class 1 of Type 1 *Laminated plastic for general construction shall be 1/32 or 1/16 thick high-pressure type *All top, side and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finish as selected for exposed surfaces. *Adhesive for laminate shall be urea-formaldehyde resin free. *Edge moldings shall be PVC edge band and appear on all edges of the casework that are visibly exposed. Molding shall be the same thickness as shelf when on shelf, counter molding shall be 1-1/4 wide and flush with worksurface. *Shelving shall be 3/4" thick core with laminate on both sides. *Casework shall be fabricated using flush construction methods with modern machinery. *Casework shall be delivered fully constructed and ready for installation. Each unit shall be self-supporting and permit relocation. The sharing of component parts to form a rigid, modular, free-standing assembly shall not be acceptable Features: *Unit shall be free standing with ability to anchor to floor or walls. *Unit shall have a non-adjustable bottom shelf that is the base of the cabinet positioned on top of the toe kick *Unit shall have a 4" toe kick *Shelving Units shall have 7 adjustable shelves. Worksurfaces: *Countertop shall run the length of the end panels and be composed out of a solid surface material. Core shall be 1- 1/8" thick with 1/16" laminate finish. *Backsplash and returns shall be provided where shown on drawings. *All exposed edges shall be radiused ¼ . Shelves: *All shelves shall be 3/4 thick core with high pressure laminate on both sides. *All shelves adjustable vertically on 1" centers. *All top, side, and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finishes as selected for the exposed surfaces. All cabinet backs will have HPL on interior surface Electrical: *Units are prewired with electrical from the factory and support the data as required. All modular casework should be field verified prior to purchase/installation. Building contractor to pull wiring. Either construction or activation contractor to have licensed electrician make the connections from building to modular casework. *Electrical fixtures shall be Hospital Grade 20 amps, 120 volt, 3-wire polarized grounded duplex receptacles. *Grommet holes to be drilled on site after installation of equipment for proper coordination. Quality Assurance: *Manufacturer must have a minimum of 5 years experience in providing manufactured casework for similar types of projects. Manufacturer facility must be certified to premium grade by the AWI Quality Certification Program. *All pharmacy casework included in this specification shall be made by a pharmacy casework manufacturer who is a specialist in the design and manufacture of pharmacy casework and has in operation, a factory adequate in size, with facilities for and devoted to the manufacture of the equipment he or his distributor proposes to supply. This requirement is stated for the Owners protection to eliminate any divided responsibility and to ensure that all completed assemblies shall be in harmony and uniform in design, color, type of hardware, etc., for the completed facility/installation. *A minimum of five years experience in the design, sale, manufacture, shipping, and installation of the quality and type of pharmacy casework specified herein shall be required Finishes: *Countertop- Solid surface (Insert manufacturer/color). *Casing, shelves, end panels- Laminate (Insert manufacturer/color), with PVC edge banding to match laminate. Final finishes to be approved by X. GENERAL REQUIREMENTS FOR MODULAR WALL AT PICK UP WINDOWS Free standing wall panel 8 feet tall with polystyrene core. Picture windows will be glazed with ¼ LEXAN and shall be an integral part of the wall panel. The window shall be non-opening, and the entire window frame shall be painted in accordance with AAMA Specification 603.8. Vinyl covered gypsum board both sides of wall 3 thick composite sandwich panels, with outside and inside to be ½ class A fire-shield gypsum board with a vinyl finish Core shall be one pound density polystyrene laminated with a structural adhesive. The core shall have the following mechanical properties: shear strength(flatwise) 18-22 PSI; shear modulus (flatwise) 280-320 PSI; water absorption rate shall be less and 4%; and STC value 32 Insulated to a minimum of R-11 Every 4 will have an aluminum extruded post with snap cover to house all the electrical components All posts and window trim painted to match the wall covering 3 x3 steel tubes for support no baseplates Polystyrene Core shall have the following mechanical properties: Shear strength (flatwise) 18 -22 PSI Shear Modulus (flatwise) 280 - 320 PSI The water absorption rate shall be less than 4% STC Value Picture windows will be glazed with ¼ LEXAN and shall be an integral part of the wall panel. The window shall be non-opening, and the entire window frame shall be painted in accordance with AAMA Specification 603.8. Pharmacy Renovation Project RX Fill and Check Area G.V. (Sonny) Montgomery VAMC Jackson, Mississippi Project: Pharmacy Renovation Project Issue Date: Oct 2020 Total Quantity: 1 Finish Sample Required if Checked Manufacturer Certified Installation Required if Checked Item Name: RX Fill and Check Island Brand Name or Equal: Modular Pharmacy Solutions Width: Assorted Depth: Assorted Height: Assorted (Use drawing package to identify dimensions) Salient Characteristics: Pharmacy storage and standing height workstation to function as the pharmacy check and fill operations. Unit is designed to have a working countertop with cabinetry below and above providing storage and space to hold equipment and supplies. Unit is a free standing, two-sided island with pass thru opening to receive orders from the other side with above the counter mounted shelving, continuous countertop and lower storage with finished end panels. Unit is designed with the following components: Secured suspended upper-case support system with adjustable shelving, 24" wide task lighting, solid surface countertop, open under counter storage, pull out printer shelves, knee space with back panel, open adjustable shelving, gravity drawers and modular hospital grade duplex receptacles and data boxes integrated. Power entry from overhead junction box; coordinate with building MEP. Side 1 (Pharmacy Fill): (4) 24" wide Gravity sloped drawers with dividers, set up for 4 workstations, (1) 24" wide printer pull out shelves to house automation printers, (8) 34-1/4" wide shelf sloping overhead storage with task lighting and pass thru (maintain 20" clear between bottom of task light and top of worksurface), (4) 24-3/8" under counter shelf storage units and (4) open units to hold waste bin. Side 2 (Pharmacy Check): (8) 34-1/4" wide shelf sloping overhead storage with task lighting and pass thru (maintain 20" clear between bottom of task light and top of worksurface), set up for 4 workstations with (4) 45-3/8 wide knee space and (4) printer drawers 24 wide. Solid Surface CTR top. GENERAL REQUIREMENTS FOR MODULAR MILLWORK All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes. Cabinets constructed of HPL over a ½ minimal thickness low VOC substrate with all edges sealed with matching edge- band. Cabinet interiors fully HPL or LPL lined with no exposed substrate. Warranty- Limited Lifetime To include minimum of the following specifications: A component-based line of cabinetry and coordinating work tops to be used in labs and pharmacy spaces to supply a built- in look while maintaining the quality and flexibility of a modular approach. A wide variety of fully modular cabinet components available for upper and lower storage. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare. Full extension steel ball bearing drawer glides. Work top surface uses Solid Surface material. Adjustable height shelving, HPL surface on all sides of shelves and shelving unit ADDITIONAL REQUIREMENTS ARE AS FOLLOWS: Materials: *Core material shall be particle board conforming to CS 236-66 45 pound, B density, Class 1 of Type 1 *Laminated plastic for general construction shall be 1/32 or 1/16 thick high-pressure type *All top, side and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finish as selected for exposed surfaces. *Adhesive for laminate shall be urea-formaldehyde resin free. *Edge moldings shall be PVC edge band and appear on all edges of the casework that are visibly exposed. Molding shall be the same thickness as shelf when on shelf, counter molding shall be 1-1/4 wide and flush with worksurface. *Shelving shall be 3/4" thick core with laminate on both sides. *Casework shall be fabricated using flush construction methods with modern machinery. *Casework shall be delivered fully constructed and ready for installation. Each unit shall be self-supporting and permit relocation. The sharing of component parts to form a rigid, modular, free-standing assembly shall not be acceptable Features: *Unit shall be free standing with ability to anchor to floor or walls. *Unit shall have a non-adjustable bottom shelf that is the base of the cabinet positioned on top of the toe kick *Unit shall have a 4" toe kick. *Steel supports/back panels: shall be capable to support up to 600 pounds. Finish shall be powder coated paint that shall be coordinated with laminate finish. They should include slant brackets at 2 intervals, a retainer clip and shall allow for the adjustment of shelves on steel pins. Back panels shall be removable and able to incorporate electrical duplex boxes. Drawers: *Drawer module inserts shall be individual modular units that are completely removable and relocatable without being disassembled. *Drawer suspension shall have full extension travel, full steel ball bearings of carbonized steel and a positive stop and lock-in closed position (self-closing drawer slides). *Doors and drawer fronts shall be a minimum of 13/16" thick with composed out of the same material as the cabinetry finished with high pressure laminate. Worksurfaces: *Countertop shall run the length of the end panels and be composed out of a solid surface material. Core shall be 1- 1/8" thick with 1/16" laminate finish. *Backsplash and returns shall be provided where shown on drawings. *All exposed edges shall be radiused ¼ . Shelves: *All shelves shall be 3/4 thick core with high pressure laminate on both sides. *All shelves noted as being sloping shall also adjust to a flat position. Adjustable vertically on 1" centers and from horizontal to 15, 30, and 45-degree slope down. *All shelves shall be completely reversible with retainer lips being turned up, down, or to the back as required for use. *All top, side, and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finishes as selected for the exposed surfaces. All cabinet backs will have HPL on interior surface. Electrical: *Units are prewired with electrical from the factory and support the data as required. All modular casework should be field verified prior to purchase/installation. Building contractor to pull wiring. Either construction or activation contractor to have licensed electrician make the connections from building to modular casework. *Electrical fixtures shall be Hospital Grade 20 amps, 120 volt, 3-wire polarized grounded duplex receptacles. *Grommet holes to be drilled on site after installation of equipment for proper coordination. Quality Assurance: *Manufacturer must have a minimum of 5 years experience in providing manufactured casework for similar types of projects. Manufacturer facility must be certified to premium grade by the AWI Quality Certification Program. *All pharmacy casework included in this specification shall be made by a pharmacy casework manufacturer who is a specialist in the design and manufacture of pharmacy casework and has in operation, a factory adequate in size, with facilities for and devoted to the manufacture of the equipment he or his distributor proposes to supply. This requirement is stated for the Owners protection to eliminate any divided responsibility and to ensure that all completed assemblies shall be in harmony and uniform in design, color, type of hardware, etc., for the completed facility/installation. *A minimum of five years experience in the design, sale, manufacture, shipping, and installation of the quality and type of pharmacy casework specified herein shall be required Finishes: *Countertop- Solid surface (Insert manufacturer/color). *Casing, shelves, end panels- Laminate (Insert manufacturer/color), with PVC edge banding to match laminate. Final finishes to be approved by X. Pharmacy Renovation Project Automation Support Area G.V. (Sonny) Montgomery VAMC Jackson, Mississippi Project: Pharmacy Renovation Project Issue Date: Oct 2020 Total Quantity: 1 Finish Sample Required if Checked Manufacturer Certified Installation Required if Checked Item Name: Automation Replenishment and Vial Storage, Narcotic Workstation Brand Name or Equal: Modular Pharmacy Solutions Width: Assorted Depth: Assorted Height: Assorted (Use drawing package to identify dimensions) Salient Characteristics: Pharmacy storage shelves used to store pharmaceutical drugs, containers and other supplies needed to support and replenish the automation. High volume gravity-fed vial storage unit designed for easy access to vials during the filling process. Unit is designed with gravity fed compartment with plexiglass front to see when vial supply is low and a separate built in area for caps. Narcotic workstation and storage for filling schedule 2-5 drugs. Unit is designed with the following components: adjustable flat or sloping shelves above counter, solid surface countertop, under counter printer drawer storage, gravity drawers and prewired modular hospital grade duplex outlets and data boxes. Overall dimensions: SEE DRAWINGS. GENERAL REQUIREMENTS FOR MODULAR MILLWORK All surfaces must be cleanable with hospital grade germicides and bleach solutions without harm to finishes. Cabinets constructed of HPL over a ½ minimal thickness low VOC substrate with all edges sealed with matching edge- band. Cabinet interiors fully HPL or LPL lined with no exposed substrate. Warranty- Limited Lifetime To include minimum of the following specifications: A component-based line of cabinetry and coordinating work tops to be used in labs and pharmacy spaces to supply a built- in look while maintaining the quality and flexibility of a modular approach. A wide variety of fully modular cabinet components available for upper and lower storage. Drawer construction options of standard box type with replaceable drawer front and unitary interior box for use in healthcare. Full extension steel ball bearing drawer glides. Work top surface uses Solid Surface material. Adjustable height shelving, HPL surface on all sides of shelves and shelving unit ADDITIONAL REQUIREMENTS ARE AS FOLLOWS: Materials: *Core material shall be particle board conforming to CS 236-66 45 pound, B density, Class 1 of Type 1 *Laminated plastic for general construction shall be 1/32 or 1/16 thick high-pressure type *All top, side and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finish as selected for exposed surfaces. *Adhesive for laminate shall be urea-formaldehyde resin free. *Edge moldings shall be PVC edge band and appear on all edges of the casework that are visibly exposed. Molding shall be the same thickness as shelf when on shelf, counter molding shall be 1-1/4 wide and flush with worksurface. *Shelving shall be 3/4" thick core with laminate on both sides. *Casework shall be fabricated using flush construction methods with modern machinery. *Casework shall be delivered fully constructed and ready for installation. Each unit shall be self-supporting and permit relocation. The sharing of component parts to form a rigid, modular, free-standing assembly shall not be acceptable Features: *Unit shall be free standing with ability to anchor to floor or walls. *Unit shall have a non-adjustable bottom shelf that is the base of the cabinet positioned on top of the toe kick *Unit shall have a 4" toe kick. *Shelving Units shall have 7 adjustable shelves. *Steel supports/back panels: shall be capable to support up to 600 pounds. Finish shall be powder coated paint that shall be coordinated with laminate finish. They should include slant brackets at 2 intervals, a retainer clip and shall allow for the adjustment of shelves on steel pins. Back panels shall be removable and able to incorporate electrical duplex boxes. Drawers: *Drawer module inserts shall be individual modular units that are completely removable and relocatable without being disassembled. *Drawer suspension shall have full extension travel, full steel ball bearings of carbonized steel and a positive stop and lock-in closed position (self-closing drawer slides). *Doors and drawer fronts shall be a minimum of 13/16" thick with composed out of the same material as the cabinetry finished with high pressure laminate. Worksurfaces: *Countertop shall run the length of the end panels and be composed out of a solid surface material. Core shall be 1- 1/8" thick with 1/16" laminate finish. *Backsplash and returns shall be provided where shown on drawings. *All exposed edges shall be radiused ¼ . Shelves: *All shelves shall be 3/4 thick core with high pressure laminate on both sides. *All shelves noted as being sloping shall also adjust to a flat position. Adjustable vertically on 1" centers and from horizontal to 15, 30, and 45-degree slope down. *All shelves shall be completely reversible with retainer lips being turned up, down, or to the back as required for use. *All top, side, and bottom panels and shelf panels shall be laminated with high pressure laminate including cabinet interiors in the same color and finishes as selected for the exposed surfaces. All cabinet backs will have HPL on interior surface. Electrical: *Units are prewired with electrical from the factory and support the data as required. All modular casework should be field verified prior to purchase/installation. Building contractor to pull wiring. Either construction or activation contractor to have licensed electrician make the connections from building to modular casework. *Electrical fixtures shall be Hospital Grade 20 amps, 120 volt, 3-wire polarized grounded duplex receptacles. *Grommet holes to be drilled on site after installation of equipment for proper coordination. Quality Assurance: *Manufacturer must have a minimum of 5 years experience in providing manufactured casework for similar types of projects. Manufacturer facility must be certified to premium grade by the AWI Quality Certification Program. *All pharmacy casework included in this specification shall be made by a pharmacy casework manufacturer who is a specialist in the design and manufacture of pharmacy casework and has in operation, a factory adequate in size, with facilities for and devoted to the manufacture of the equipment he or his distributor proposes to supply. This requirement is stated for the Owners protection to eliminate any divided responsibility and to ensure that all completed assemblies shall be in harmony and uniform in design, color, type of hardware, etc., for the completed facility/installation. *A minimum of five years experience in the design, sale, manufacture, shipping, and installation of the quality and type of pharmacy casework specified herein shall be required Finishes: *Countertop- Solid surface (Insert manufacturer/color). *Casing, shelves, end panels- Laminate (Insert manufacturer/color), with PVC edge banding to match laminate. Final finishes to be approved by X. Pharmacy Custom Cabinetry/Pharmacy Casework Salient Characteristics Materials: Core material shall be particle board conforming to CS 236-66 45 pound B density Class 1 Type 1 Laminated plastic for general construction shall be 1/32 or 1/16 thick high-pressure type All top, side and bottom panels and shelf panels shall be laminated with high pressure lami...
Data sourced from SAM.gov.
View Official Posting »