Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Department of Veterans Affairs, NCO 15, Leavenworth, KS intends to negotiate a service contract for SDVOSB vendors for MEDICAL GAS INSPECTION with a Base plus four option periods at the Wichita VAMC. ... Department of Veterans Affairs, NCO 15, Leavenworth, KS intends to negotiate a service contract for SDVOSB vendors for MEDICAL GAS INSPECTION with a Base plus four option periods at the Wichita VAMC. All contract details, to include specifications will be included in the Request for Quote (RFQ), which will be released on or about March 26th 2021. Point of contact is JONATHAN.LUTMER@va.gov, 913-946-1984 / 410-446-3862.

Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Scope: The Department of Veterans Affairs, Robert J. Dole Medical Center in Wichita, Kansas requires station wide Medical Gases inspection in Building 1, 1C, 2, 19, 34, 60 and 62 totaling 748 outlet f... Scope: The Department of Veterans Affairs, Robert J. Dole Medical Center in Wichita, Kansas requires station wide Medical Gases inspection in Building 1, 1C, 2, 19, 34, 60 and 62 totaling 748 outlet for testing and inspection annually. The contractor shall furnish all labor, transportation, parts, and other costs necessary to complete the required testing of these systems. SERVICES TO BE PROVIDED: Vendor will inspect the existing medical piped gas systems for compliance with applicable NFPA 99, CGA, and ASSE specifications and recommendations. The inspection will include, an evaluation of all available medical gas terminals for pressure, flow, latching, de-latching, leakage and proper labeling of Oxygen, Medical Air, Nitrous Oxide, Nitrogen, and Vacuum. An evaluation of all master, area and local alarms for proper activation, labeling, general condition, service location, test button for audible and visual signal, and system pressure gauges. An evaluation of all zone valves for leakage, proper labeling and general condition. An evaluation of all source supply equipment for proper configuration, redundancies, labeling, local alarms, location and warning signage. a. The Vendor will also submit a complete report defining. b. Install solenoid valves, coils, and wiring to prevent liquid migration from the evaporator to the compressor and necessary labor.