Inactive

THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AN... THIS REQUEST FOR INFORMATION (RFI) IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a sources sought/RFI only. The purpose of this sources sought/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 339112 (size standard 1,000). Responses to this sources sought will be used by the Government to make appropriate acquisition decisions. After review of the responses to this sources sought, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 10 Network Contracting Office, is seeking sources that can provide, Surgical Instruments that meet the following salient characteristics and specifications for the Ann Arbor VAMC, Michigan. **TriMed, Inc.** Item Description Qty WFS - Purchased Wrist Fixation Set - Purchased     VLBPL-3-7 VolarBearingPlate,Lt,3-Hole,7-Peg 2 VLBPL-5-7 VolarBearingPlate,Lt,5-Hole,7-Peg 2 VLBPL-7-7 VolarBearingPlate,Lt,7-Hole,7-Peg 2    VLBPR-3-7 VolarBearingPlate,Rt,3-Hole,7-Peg 2 VLBPR-5-7 VolarBearingPlate,Rt,5-Hole,7-Peg 2 VLBPR-7-7 VolarBearingPlate,Rt,7-Hole,7-Peg 2    VLBPL-5-5 VolarBearingPlate,Lt,5-Hole,5-Peg 2 VLBPR-5-5 VolarBearingPlate,Rt,5-Hole,5-Peg 2    VPPL-3-7 Volar Fixed Angle Plate, Lt, 3-Hole, 7-Peg 2 VPPL-5-7 Volar Fixed Angle Plate, Lt, 5-Hole, 7-Peg 2 VPPR-3-7 Volar Fixed Angle Plate, Rt, 3-Hole, 7-Peg 2 VPPR-5-7 Volar Fixed Angle Plate, Rt, 5-Hole, 7-Peg 2    VLBPL-9-7 VolarBearingPlate,Lt,9-Hole,7-Peg 1 VLBPR-9-7 VolarBearingPlate,Rt,9-Hole,7-Peg 1 VLBPL-11-7 VolarBearingPlate,Lt,11-Hole,7-Peg 1 VLBPR-11-7 VolarBearingPlate,Rt,11-Hole,7-Peg 1    WHV-4 Volar Wrist Hook Plate, 4-Hole 2 WHV-6 Volar Wrist Hook Plate, 6-Hole 2 WHD-4 Dorsal Wrist Hook Plate, 4-Hole 2 WHD-6 Dorsal Wrist Hook Plate, 6-Hole 2    RCP3 Radial Column Pin Plate, 3-Hole 2 RCP5 Radial Column Pin Plate, 5-Hole 2 RCP7 Radial Column Pin Plate, 7-Hole 1 DUP3 Dorsal/ Ulnar Pin Plate, 3-Hole 2 DUP5 Dorsal/ Ulnar Pin Plate, 5-Hole 2 DUP7 Dorsal/ Ulnar Pin Plate, 7-Hole 1    BRGP Bridge Plate 2 VBP32 Volar Buttress Pin, 32mm 2 VBP42 Volar Buttress Pin, 42mm 2 BP27 Dorsal Buttress Pin, 27mm 2 BP32 Dorsal Buttress Pin, 32mm 2    WFP3 Wire Form Plate, 3-Hole 2 WFP5 Wire Form Plate, 5-Hole 2 WASHR Wire Form Washer 4    RPGL-7 Radial Peg Plate, Lt, 7-Hole 1 RPGR-7 Radial Peg Plate, Rt, 7-Hole 1 RPGL-10 Radial Peg Plate, Lt, 10-Hole 1 RPGR-10 Radial Peg Plate, Rt, 10-Hole 1    UPG-5 Ulnar Peg Plate, 5-Hole 2 UPG-7 Ulnar Peg Plate, 7-Hole 2    SFCOC.28/28 SFC Outer Component, 28mm 2 SFCOC.32/32 SFC Outer Component, 32mm 2 SFCIC.24/10 SFC Inner Component, 24mm/10mm 1 SFCIC.24/14 SFC Inner Component, 24mm/14mm 1 SFCBP.24/14 SFC Combination, 24mm/14mm 1 SFCBP.27/14 SFC Combination, 27mm/14mm 1 VSP-L Volar Shear Plate, Lt 1 VSP-R Volar Shear Plate, Rt 1    TRX2.3-10 Torx Cortical Screw 2.3, 10mm 5 TRX2.3-12 Torx Cortical Screw 2.3, 12mm 5 TRX2.3-14 Torx Cortical Screw 2.3, 14mm 5 TRX2.3-16 Torx Cortical Screw 2.3, 16mm 5 TRX2.3-18 Torx Cortical Screw 2.3, 18mm 5 TRX2.3-20 Torx Cortical Screw 2.3, 20mm 5 TRX2.3-22 Torx Cortical Screw 2.3, 22mm 5 TRX2.3-24 Torx Cortical Screw 2.3, 24mm 5 TRX2.3-26 Torx Cortical Screw 2.3, 26mm 5 TRX2.3-28 Torx Cortical Screw 2.3, 28mm 5 TRX2.3-30 Torx Cortical Screw 2.3, 30mm 3 TRX2.3-32 Torx Cortical Screw 2.3, 32mm 3    TPEG-10 Torx Threaded Peg, 10mm 2 TPEG-12 Torx Threaded Peg, 12mm 2 TPEG-14 Torx Threaded Peg, 14mm 5 TPEG-16 Torx Threaded Peg, 16mm 5 TPEG-18 Torx Threaded Peg, 18mm 5 TPEG-20 Torx Threaded Peg, 20mm 5 TPEG-22 Torx Threaded Peg, 22mm 5 TPEG-24 Torx Threaded Peg, 24mm 5 TPEG-26 Torx Threaded Peg, 26mm 5 TPEG-28 Torx Threaded Peg, 28mm 3 TPEG-30 Torx Threaded Peg, 30mm 3 TPEG-32 Torx Threaded Peg, 32mm 3    UPEG-10 Torx Unthreaded Peg, 10mm 2 UPEG-12 Torx Unthreaded Peg, 12mm 2 UPEG-14 Torx Unthreaded Peg, 14mm 5 UPEG-16 Torx Unthreaded Peg, 16mm 5 UPEG-18 Torx Unthreaded Peg, 18mm 5 UPEG-20 Torx Unthreaded Peg, 20mm 5 UPEG-22 Torx Unthreaded Peg, 22mm 5 UPEG-24 Torx Unthreaded Peg, 24mm 5 UPEG-26 Torx Unthreaded Peg, 26mm 3 UPEG-28 Torx Unthreaded Peg, 28mm 3    HEX2.7-08 Hex Cortical Screw 2.7, 08mm 2 HEX2.7-10 Hex Cortical Screw 2.7, 10mm 3 HEX2.7-12 Hex Cortical Screw 2.7, 12mm 3 HEX2.7-14 Hex Cortical Screw 2.7, 14mm 3 HEX2.7-16 Hex Cortical Screw 2.7, 16mm 3 HEX2.7-18 Hex Cortical Screw 2.7, 18mm 2    LCBS2.7-08 Locking Cortical Screw 2.7, 08mm 2 LCBS2.7-10 Locking Cortical Screw 2.7, 10mm 3 LCBS2.7-12 Locking Cortical Screw 2.7, 12mm 2 LCBS2.7-14 Locking Cortical Screw 2.7, 14mm 2 LCBS2.7-16 Locking Cortical Screw 2.7, 16mm 3 LCBS2.7-18 Locking Cortical Screw 2.7, 18mm 2    HEX3.2-08 Hex Cortical Screw 3.2, 08mm 3 HEX3.2-10 Hex Cortical Screw 3.2, 10mm 4 HEX3.2-11 Hex Cortical Screw 3.2, 11mm 4 HEX3.2-12 Hex Cortical Screw 3.2, 12mm 5 HEX3.2-13 Hex Cortical Screw 3.2, 13mm 5 HEX3.2-14 Hex Cortical Screw 3.2, 14mm 5 HEX3.2-15 Hex Cortical Screw 3.2, 15mm 5 HEX3.2-16 Hex Cortical Screw 3.2, 16mm 4 HEX3.2-18 Hex Cortical Screw 3.2, 18mm 3 HEX3.2-20 Hex Cortical Screw 3.2, 20mm 3    LHEX3.2-10 Locking Hex Screw 3.2, 10mm 4 LHEX3.2-12 Locking Hex Screw 3.2, 12mm 5 LHEX3.2-14 Locking Hex Screw 3.2, 14mm 5 LHEX3.2-16 Locking Hex Screw 3.2, 16mm 4 LHEX3.2-18 Locking Hex Screw 3.2, 18mm 3 LHEX3.2-20 Locking Hex Screw 3.2, 20mm 3    WIRE-1.1/100 K-Wire 1.1, 100mm AKA WIRE-1.1 15 OLIVE-1.6/100 Olive K-Wire 1.6, 100mm 3    DRILL-1.8/080 MG Drill 1.8, 80mm for Mini Guide 2 DRILL-1.8/090 Drill 1.8, 90mm AKA DRILL-1.8 2 DRILL-2.0/095 Drill 2.0, 95mm 2 DRILL-2.3/080 Drill 2.3, 80mm 2    GUIDEMINI-1.8 Mini Guide, 1.8mm 62    GUIDE-1.8/2.3 Drill Guide, 1.8mm/2.3mm 1 GUIDEQ-1.8 Quick Guide, 1.8mm 1 GUIDEPEG-1.8 Peg Guide, 1.8mm 2 XTNDRGUIDE Peg Guide Extender 1 GUIDEQ-2.3 Quick Guide, 2.3mm 1 GUIDE-2.3/3.2 Drill Guide, 2.3mm/3.2mm 1 GAUGE30 Depth Gauge, 30mm 1 DVHX-2.5 Hex Driver, 2.5mm 1 DVTX-8 Torx 8 Driver 1 GRIPRTX-8 Gripper, Torx 1 TAP-3.2 AO Tap, 3.2mm AO 1 TAP-2.3 AO Tap, 2.3mm AO 1 DVHX-2.5/110 AO Hex Driver 2.5, 110mm AO 1 DVTX-8/110 AO Torx 8 Driver, 110mm AO 1 HNDL-QUICK Quick Handle 1 WBC Wrist Bone Clamp 2 PICK Dental Pick 1 COBR-R Cobra Retractor, Right 1 COBR-L Cobra Retractor, Left 1 BNDPLT-WFS R Plate Bender, Rt, WFS 1 BNDPLT-WFS L Plate Bender, Lt, WFS 1 BRT Bearing Reduction Tool 1 BNDWIR-1.1 Wire Bender, 1.1mm 1 CUTRWIR-1.1 Wire Cutter, 1.1mm 1 PINCLAMP Pin Clamp 2 IMPCT Impactor 1    GDWHV-1.8 Wrist Hook Volar Guide 1 IMPCT-WHV Wrist Hook Volar Impactor 1 GDWHD-1.8 Wrist Hook Dorsal Guide 1 IMPCT-WHD Wrist Hook Dorsal Impactor 1    GUIDELCBS-2.0 Locking Drill Guide, 2.0mm 1 DVHX-2.0/110 AO Hex Driver 2.0, 110mm AO 2 INSRTR-BRG Bridge Plate Inserter 1 XPANDR Expander/ Compression Tool 1 DVHX-2.5/180 AO Hex Driver 2.5, 180mm AO 1 GUIDE-2.0/2.7 Drill Guide, 2.0mm/2.7mm 1 WFS-SCREW WFS Screw/ Peg Caddy 1 WFS-PLATE WFS Volar Plate Caddy 1 WFS-FRAG WFS Fragment Specific Caddy 1 BRG-SCREW Bridge Plate 2.7 Screw Caddy Insert 1 BRG-BRKT Bridge Plate Tray Bracket 1 WFS-WHP Wrist Hook Plate Caddy 1 BRG-INSRTR BR... Bridge Plate Inserter Bracket 1 WFS-TRAY Wrist Fixation System Tray 1    XPANDR-BRKT Xpander Bracket 1    GDBLOCK-1.8 SL Drill Block Guide, Lt, Std 2 GDBLOCK-1.8 SR Drill Block Guide, Rt, Std 2 WEDGE-4 Volar Plate Wedge, 4.0mm 2 WEDGE-6 Volar Plate Wedge, 6.0mm 2    GUIDELHEX-3.2 Locking Drill Guide, 3.2mm Screws 1 Salient Characteristics: All instruments must meet the exact measurements described above. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? Distributors MUST provide an Authorized Distributor Letter from the OEM. (4) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract number. (7) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? (8) Please provide general pricing of your products/solution for market research purposes. (9) Please submit your capabilities in regards to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? (10) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (11) Please provide your SAM Identification Number. (12) Please provide a list of detailed requirements and drawings. *** Submissions addressing Section (8) should show clear, compelling and convincing*** evidence that all equal to items" meet all required salient characteristics. Responses to this notice shall be submitted via email to louann.gilliland@va.gov. Telephone responses shall not be accepted. Responses must be received no later than Monday, July 29, 2024, at 12:00 PM EST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this request for information. Responses to this notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.