Inactive

Attachment D E.2 52.212-2 EVALUATION COMMERCIAL ITEMS (OCT 2014) The provision at 52.212-2, Evaluation -- Commercial Items, will be used. The comparative evaluation procedures will be used in accordan... Attachment D E.2 52.212-2 EVALUATION COMMERCIAL ITEMS (OCT 2014) The provision at 52.212-2, Evaluation -- Commercial Items, will be used. The comparative evaluation procedures will be used in accordance with FAR 13.106-2(b)(3). The Government will award a Firm-Fixed Price contract to the responsible quoter using a comparative evaluation. The comparative evaluation will be performed in accordance with FAR 13.106-2(b)(3). The government reserves the right to select a quotation that provides benefit to the government that exceeds the minimum but is not required to do so. Quoters are advised that quotation may exceed the requirements, but the government is not requesting or accepting alternate quotes; each response must respond to the solicitation requirement, Statement of Need (SON) the RFQ. Quoters shall submit letter of authorization from the Original Equipment manufacturer. The government will apply the following comparative evaluation process as the basis for award: Assess the direct comparison of one quote with another using a uniform and fair approach to determine which quote provides the government what it needs, where and when in accordance with the SON and RFQ. Factors: Technical, Past Performance, Delivery/installation, and Price 1. Technical: Shall meet specifications stated in SON and RFQ, shall submit authorization letter from EOM. LOS form signed/applicable boxes must be checked and past performance. 2. Performance: Submit 3 past performance for the same or similar products/services provided to other government entities or private sectors. 3. Delivery/installation: All items to be delivered within 30 days of receipt of order. 4. Price: Most advantageous to the government, quoters must use the enclosed Price Schedule. Once one quotation is found acceptable, it is compared to the remaining ones, and the best one is chosen for the best value to the government. The Government intends to make award selection without clarification or discussion but may determine after evaluating submitted quotes that the elements stated in FAR 13.106-2(b) for evaluation procedures are necessary and conduct them as appropriate. The Government reserves the right to make no award if no quotes meet the requirements of this solicitation. To be eligible for award offerors must be registered in System for Award Management (SAM) prior to submission of quote in accordance with the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items. SDVOSB s must be certified and verified in VetBiz prior to submission. Note: Quotes received not conforming to the SON, RFQ, and evaluation criteria will not be evaluated or considered for award.

Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Sources Sought The Department of Veterans Affairs, James A, Haley Veterans Hospital (JAVH) located at 13000 Bruce B. Downs, Tampa, Fl. 33612 is issuing this sources sought synopsis as a means of condu... Sources Sought The Department of Veterans Affairs, James A, Haley Veterans Hospital (JAVH) located at 13000 Bruce B. Downs, Tampa, Fl. 33612 is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in and the resources to support this requirement for misc. dental equipment manufactured by GROBET, WHIPMIX, BENCO, DENTSPLY, VALLEYLAB, PARKEL and MORIT. The applicable North American Industry Classification System (NAICS) code assigned to this procurement is 339114 - Dental Equipment and Supplies Manufacturing. The sources sought are part of the market research being conducted, and it is not a request for a quote. This source sought will be used to determine the type set aside. SDVOSBs must be authorized to resell the products listed below. The solicitation will be posted after the market research. Sources Sought closing date is 8/10/2022. Soon after the market research, the solicitation will be posted. The posing date is to be determined. PHYSICAL CHARACTERISTICS: Equipment must have the physical characteristics to enable the government to perform the capabilities: ESTIMATED QUANTATIES: Brand name only 2577-473 Qty 10 #2N Bunsen Burner 4380-289 Qty 08 Digital Water Bath 5522-025 Qty 08 e-on Capsule Mixer 4492-186 Qty 08 Cavitron JET Plus 5727-233 Qty 01 Digitest 3 Pulp Vitality Tester 3625-034 Qty 01 Root ZX II Apex Locator SPECIFIC NEED/ SALIENT CHARACTERISTIC S 1) Bunsen Burner to include the following: Qty: 10 Basis of Design: Grobet #2N Bunsen Burner (D6560) Salient Characteristics: a. Base Diameter: 3 b. Height: 4 ½ c. ¼ tubing requirement d. Propane gas 2) Bath, Water, Impression Qty: 8 Basis of Design: Whipmix Digital Water Bath (D6570) Salient Characteristics: a. Dimensions : 5"H x 7-1/2"W x 8-3/4"L b. Electrical: 115V c. On/off d. Digital Display 3) Amalgamator, Dental Qty: 8 Basis of Design: Benco e-on Capsule Mixer (D8850) Salient Characteristics: a. Dimensions: 8 ½ in W x 7 1/8 in H x 6 ¾ in D b. Compatible with all types of capsules c. High speed motor d. Electrical: 110-120V 4) Prophylaxis Unit, Ultrasonic Qty: 8 Basis of Design: Dentsply Cavitron Jet Plus (D9060) Salient Characteristics: a. Dimensions : 4"H x 73/8"W x 91/2"D. b. Electrical: 115V c. Requirements: air and water supply d. Accepts Cavitron 30KHz Inserts e. Autoclavable 5) Scanner, Pulp, Digital Qty: 1 Basis of Design: Parkel Digitest 3 Pulp Vitality Tester (U0059) Salient Characteristics: a. Handheld b. Autoclavable Tips c. 9V battery operation 6) Locator, Apex Qty: 1 Basis of Design: Morit Root ZX II Apex Locator (U0060) Salient Characteristics: a. Size: W x D x H 4.13 x 4.13 x 4.53 b. Weight: approx. 13.05 oz. (370 g) c. 4.5V (Battery operation) d. Accessories: Module, Probe Cord, File Holders (3), Contrary Electrodes (lip clips) (5), Function Tester Response due date: 08/10/2022 @10am