Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

GENERAL: The newly constructed leased consolidation project at New Port Richey Community Based Outpatient Clinic (NPR CBOC) at 7900 Little Road, New Port Richey, FL 34654-3419. The facility is combini... GENERAL: The newly constructed leased consolidation project at New Port Richey Community Based Outpatient Clinic (NPR CBOC) at 7900 Little Road, New Port Richey, FL 34654-3419. The facility is combining and expanding its services. BACKGROUND: The NPR CBOC is expanding services in the new facility and has a requirement to monitor the temperature of newly purchased medical refrigerators/freezers. The procurement of the below listed equipment is required to expand upon the current CheckPoint Monitoring system contract in place with the Tampa VA facility. SCOPE: The refrigerators and freezers that will utilize temperature monitoring will be in the lab, radiology, primary care clinics, multispecialty care clinic, eye clinic, dental clinic, pharmacy, and mental health clinics for routine storage and dispensing of medications completed by the NPR CBOC and local providers. This is a brand name only solicitation due to the current Checkpoint Monitoring system server and contract in place at the facility. This ensures continuity of care enterprise wide, no need to stock consumable supplies that are not currently being used. ESTIMATED QUANTATIES: TEMP121 Qty 24 Sensor with Snap Calibration Probe (-40 to 50 degrees C) TEMP135 Qty 3 Sensor with Thermocouple Probe TEMP124 Qty 8 Sensor with 4 Metal Probe for Insertion in Glycol Bottle TEMP125 Qty 11 Sensor with a temperature and humidity probe TEMP140B Qty 8 20 oz bottle of PGX Iceclear Product Simulation Solution for CheckPoint Temperature Monitoring TEMP105 Qty 2 Ether Base TEMP101 Qty 3 Repeater for Temperature Transmitter SPECIFIC NEED/ SALIENT CHARACTERISTIC S TEMP121 Sensor with Snap Calibration Probe (-40 to 50 degrees C) to include the following: Sensor: Sensor Range:(Internal): -20°F ~ 120°F Sensor Range (Single External): -112°F ~ 300°F with different probes Accuracy: +/- 0.25°C (0.5°F) Other sensor types Humidity 3% Accuracy 20~80% RH 4~20 mA voltage input from other sensing devices (available Q4 2006) Motion Door open/close Differential pressure C02 Liquid Nitrogen Dual probe Memory: 7 days at 15 minute interval Default transmission interval: Every 15 minutes Signal Strength: +7 dBm (5 mW) for 80 to 120 mS Enclosure: Splash-proof, 1.5 x 2.5 x 4 , approx 5 oz. Installation: Mounting clip with tape or screws Battery: 2 x AA Battery Life: Approx 3 years Operating Environment: -20°F ~ 120°F Open field range: 1000 ft Typical range in building: 50 to 200 ft Probe: Snap calibration probe (-40 to 50 degrees C) TEMP135 Sensor with Thermocouple Probe to include the following: Sensor: Sensor Range:(Internal): -20°F ~ 120°F Sensor Range (Single External): -112°F ~ 300°F with different probes Accuracy: +/- 0.25°C (0.5°F) Other sensor types Humidity 3% Accuracy 20~80% RH 4~20 mA voltage input from other sensing devices (available Q4 2006) Motion Door open/close Differential pressure C02 Liquid Nitrogen Dual probe Memory: 7 days at 15 minute interval Default transmission interval: Every 15 minutes Signal Strength: +7 dBm (5 mW) for 80 to 120 mS Enclosure: Splash-proof, 1.5 x 2.5 x 4 , approx 5 oz. Installation: Mounting clip with tape or screws Battery: 2 x AA Battery Life: Approx 3 years Operating Environment: -20°F ~ 120°F Open field range: 1000 ft Typical range in building: 50 to 200 ft Probe: Thermocouple probe TEMP124 Sensor with 4 Metal Probe for Insertion in Glycol Bottle to include the following: Sensor: Sensor Range:(Internal): -20°F ~ 120°F Sensor Range (Single External): -112°F ~ 300°F with different probes Accuracy: +/- 0.25°C (0.5°F) Other sensor types Humidity 3% Accuracy 20~80% RH 4~20 mA voltage input from other sensing devices (available Q4 2006) Motion Door open/close Differential pressure C02 Liquid Nitrogen Dual probe Memory: 7 days at 15 minute interval Default transmission interval: Every 15 minutes Signal Strength: +7 dBm (5 mW) for 80 to 120 mS Enclosure: Splash-proof, 1.5 x 2.5 x 4 , approx 5 oz. Installation: Mounting clip with tape or screws Battery: 2 x AA Battery Life: Approx 3 years Operating Environment: -20°F ~ 120°F Open field range: 1000 ft Typical range in building: 50 to 200 ft Probe: 4 metal probe TEMP125 Sensor with a temperature and humidity probe to include the following: Sensor: Sensor Range:(Internal): -20°F ~ 120°F Sensor Range (Single External): -112°F ~ 300°F with different probes Accuracy: +/- 0.25°C (0.5°F) Other sensor types Humidity 3% Accuracy 20~80% RH 4~20 mA voltage input from other sensing devices (available Q4 2006) Motion Door open/close Differential pressure C02 Liquid Nitrogen Dual probe Memory: 7 days at 15 minute interval Default transmission interval: Every 15 minutes Signal Strength: +7 dBm (5 mW) for 80 to 120 mS Enclosure: Splash-proof, 1.5 x 2.5 x 4 , approx 5 oz. Installation: Mounting clip with tape or screws Battery: 2 x AA Battery Life: Approx 3 years Operating Environment: -20°F ~ 120°F Open field range: 1000 ft Typical range in building: 50 to 200 ft TEMP140B 20 oz bottle of PGX Iceclear Product Simulation Solution for CheckPoint Temperature Monitoring accessory to TEMP124 Sensor with 4 Metal Probe for Insertion in Glycol Bottle TEMP105 Ether Base to include the following: Power requirements: 120 VAC with transformer to 6 VDC Signal Strength: +27 dBm (500 mW) Installation requirements: Wall Mounting clip with screws Enclosure: 6 x 6 x 2 20 oz Open field range: 1 mile Typical range in building: 200 ft to 400 ft TEMP101 Repeater for Temperature Transmitter to include the following: Power requirements: 120 VAC with transformer to 5 VDC Memory: 2 to 7 days, based on sensors in range Signal Strength: +27 dBm (500 mW) Installation: Wall Mounting clip with screws Enclosure: 1.5 x 12.5 x 4 5 oz Open field range: 1 mile Typical range in building: 200 ft to 400 ft

Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

GENERAL: The newly constructed leased consolidation project at New Port Richey Community Based Outpatient Clinic (NPR CBOC) at 7900 Little Road, New Port Richey, FL 34654-3419. The facility is combini... GENERAL: The newly constructed leased consolidation project at New Port Richey Community Based Outpatient Clinic (NPR CBOC) at 7900 Little Road, New Port Richey, FL 34654-3419. The facility is combining and expanding its services. BACKGROUND: The NPR CBOC is expanding services in the new facility and has requirements for new pharmacy dispenser equipment. The procurement of the equipment listed below is required for the expansion to provide the same level of care as existing VA clinics. SCOPE: The pharmacy dispenser refrigerators will be utilized in the primary care clinics, pharmacy, and mental health clinics for routine storage and dispensing of medications completed by the NPR CBOC and local providers. This is a brand name only solicitation due to the current BD Pyxis server in place at the facility. This ensures continuity of care enterprise wide, no need to stock consumable supplies that are not currently being used. Since the Pyxis devices will be an upgrade for the clinical and biomedical staff, user and maintenance training will be required. ESTIMATED QUANTATIES: 137728-01 Qty 5 137728-01 PyxisES Ref 5CF, RHG-12 Std Bi 137549-01 Qty 1 137549-01 PyxisES Ref 13CF, RHG-15 Std Bi SPECIFIC NEED/ SALIENT CHARACTERISTIC S 137728-01 PyxisES Ref 5CF, RHG-12 Std Bi to include the following: Dimensions: 32 h x 24 w x 29 d 206 lbs Interior shelves: 18 x 18 Rating, electrical and performance: Temperature range: +36°F to +50°F Electrical power: 115 V 60 Hz Maximum Current: 1.4A I 0.85A Building supply rating: 15 amp dedicated ground circuit Power plug/power cord length: NEMA 5 15 hospital grade plug (115 V) 8 10 ft Certification/agency listing: QPS (certified to UL and CSA standards) EC/UL 610101-2-011 (Dec 2016) Battery backup: Controller and communications to continue for 2 hrs (door will automatically unlock after 2 hours, but the drawers will remain locked) Emergency access strip: Dual physical locks on the right side of bins Keys: 4 regular keys (backup battery and magnetic door lock) and 2 barrel keys (override) Uniformity: +/-3.6°F (+/-2°C) Set point: 40°F (4.4°C) Temperature probe: +/-1°F (+/-0.5°C) Refrigeration: Refrigeration system: Variable speed (VCC) compressor-based, forced-air Compressor: Hermetic, VCC. Rated speed range: 1,300 4,000 rpm Condenser type: Air-cooled fin and tube, sealed Expansion device: Cap tube Evaporator type: Direct expansion with forced circulation fin and tube Defrost method: Automatic Refrigerant charge: R600a, Isobutane, EPA SNAP compliant Construction: ADA compatible: Fits under 34 in. ADA-compliant counters Insulation: Sustainable, U.S. EPA and SNAP approved Exterior/interior finish: Bacteria-resistant powder coating Doors: 1, solid, available in left or right hinge Access ports: Rear access port Casters: Available on 5 cubic Ft. Standard bin configuration 137549-01 PyxisES Ref 13CF, RHG-15 Std B to include the following: Dimensions: 70.5 h x 24.25 w x 29.5 d 363 lbs Interior shelves: 18 x 18 Rating, electrical and performance: Temperature range: +36°F to +50°F Electrical power: 115 V 60 Hz Maximum Current: 1.4A I 0.85A Building supply rating: 15 amp dedicated ground circuit Power plug/power cord length: NEMA 5 15 hospital grade plug (115 V) 8 10 ft Certification/agency listing: QPS (certified to UL and CSA standards) EC/UL 610101-2-011 (Dec 2016) Battery backup: Controller and communications to continue for 2 hrs (door will automatically unlock after 2 hours, but the drawers will remain locked) Emergency access strip: Dual physical locks on the right side of bins Keys: 4 regular keys (backup battery and magnetic door lock) and 2 barrel keys (override) Uniformity: +/-3.6°F (+/-2°C) Set point: 40°F (4.4°C) Temperature probe: +/-1°F (+/-0.5°C) Refrigeration: Refrigeration system: Variable speed (VCC) compressor-based, forced-air Compressor: Hermetic, VCC. Rated speed range: 1,300 4,000 rpm Condenser type: Air-cooled fin and tube, sealed Expansion device: Cap tube Evaporator type: Direct expansion with forced circulation fin and tube Defrost method: Automatic Refrigerant charge: R600a, Isobutane, EPA SNAP compliant Construction: ADA compatible: Fits under 34 in. ADA-compliant counters Insulation: Sustainable, U.S. EPA and SNAP approved Exterior/interior finish: Bacteria-resistant powder coating Doors: 1, solid, available in left or right hinge Access ports: Rear access port Casters: Standard on 13 cubic Ft. Standard bin configuration