Inactive

Attachment D E.2 52.212-2 EVALUATION COMMERCIAL ITEMS (OCT 2014) The provision at 52.212-2, Evaluation -- Commercial Items, will be used. The comparative evaluation procedures will be used in accordan... Attachment D E.2 52.212-2 EVALUATION COMMERCIAL ITEMS (OCT 2014) The provision at 52.212-2, Evaluation -- Commercial Items, will be used. The comparative evaluation procedures will be used in accordance with FAR 13.106-2(b)(3). The Government will award a Firm-Fixed Price contract to the responsible quoter using a comparative evaluation. The comparative evaluation will be performed in accordance with FAR 13.106-2(b)(3). The government reserves the right to select a quotation that provides benefit to the government that exceeds the minimum but is not required to do so. Quoters are advised that quotation may exceed the requirements, but the government is not requesting or accepting alternate quotes; each response must respond to the solicitation requirement, Statement of Need (SON) the RFQ. Quoters shall submit letter of authorization from the Original Equipment manufacturer. The government will apply the following comparative evaluation process as the basis for award: Assess the direct comparison of one quote with another using a uniform and fair approach to determine which quote provides the government what it needs, where and when in accordance with the SON and RFQ. Factors: Technical, Past Performance, Delivery/installation, and Price 1. Technical: Shall meet specifications stated in SON and RFQ, shall submit authorization letter from EOM. LOS form signed/applicable boxes must be checked and past performance. 2. Performance: Must submit 3 past performance for the same or similar products/services provided to other government entities or private sectors. 3. Delivery/installation: All items to be delivered within 30 days of receipt of order. 4. Price: Most advantageous to the government, quoters must use the enclosed Price Schedule. Once one quotation is found acceptable, it is compared to the remaining ones, and the best one is chosen for the best value to the government. The Government intends to make award selection without clarification or discussion but may determine after evaluating submitted quotes that the elements stated in FAR 13.106-2(b) for evaluation procedures are necessary and conduct them as appropriate. The Government reserves the right to make no award if no quotes meet the requirements of this solicitation. To be eligible for award offerors must be registered in System for Award Management (SAM) prior to submission of quote in accordance with the provision at 52.212-3, Offeror Representations and Certifications -- Commercial Items. SDVOSB s must be certified and verified in VetBiz prior to submission. Note: Quotes received not conforming to the SON, RFQ, and evaluation criteria will not be evaluated or considered for award.

Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

Pre-solicitation This is a Pre-Solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. THIS PRESOL... Pre-solicitation This is a Pre-Solicitation for commercial items prepared in accordance with the format in Subpart 12.6 as supplemented with additional information included in this notice. THIS PRESOLICITATION NOTICE IS NOT A REQUEST FOR QUOTE (RFQ). VENDORS SHOULD NOT SUBMIT FORMAL QUOTES UNTIL THE RFQ IS POSTED TO THIS WEBSITE. This notice is not to be construed as a commitment by the Government nor will the Government pay for the information resulting from this posting. The Department of Veterans Affairs (VA), Veterans Integrated Service Network (VISN 8), James A. Haley Veterans Hospital (JAHVH), Tampa, FL, intends to issue a Request for Quote (RFQ) for Shelves brand name or equal to DSI Storage product #KIT-D2-CUSTOM-KIT, KIT-D2-CUSTOM-KIT, KIT-D2-CUSTOM-KIT, D2-DC-KIT, D2-DCWB1, D2-COLORLABEL/A, D2-MM-COLORPANEL-HALF/A, D2-WKRB-30X60"W 4 UPPER SHELVES, D2-HANDLE/BSK-A, D2-WARRANTY, KIT-D1-ITEM, INSTALLATION. The equipment will be used throughout the New Bed Tower. Deliverables: PHYSICAL CHARACTERISTICS: Equipment must have the physical characteristics to enable the government to perform the capabilities: Brand Name or equal. MODUCORE BASKET/V-SHELF STORAGE - PEEL PACK, SUPPLY DISTRIBUTION- CUSTOM CONFIGURATION Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Locking Runners 28 Deep Straight/Angled Shelf Brackets Aluminum, Custom fit, Solid Dust Cover. Mounted with Stainless Steel Hex head screws Stainless Steel Ball Bearing Slides on Runners and Basket Stops Extruded, ANODIZED ALUMINUM FRAMES 4 horizontal stabilization brackets Casters -- Locking DOUBLE-wheeled casters with EZ-Lever Lock mechanism .5 Adjustability utilizing double-U 28 Runner Solid bins ranging from 2 deep to 11 Deep (Must accommodate stainless steel roller stops) Approximate Height: 77.25 Approximate Width: 22 Approximate Depth: 28 QTY:16 EA MODUCORE 36" UNITS - 5 SHELF/BASKET CONFIGURATION - CUSTOM BASED ON SITE SURVEY Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Secured (locking) runners 36 Wide frame kit Aluminum, Custom fit, Solid Dust Cover. Mounted with Stainless Steel Hex head screws All Shelves to be Stainless Steel, rolled (soft) Edges Extruded, ANODIZED ALUMINUM FRAMES 2 horizontal stabilization brackets Casters -- Locking DOUBLE-wheeled casters with EZ-Lever Lock mechanism 1 Adjustability utilizing Secured (locking) runners Stainless steel shelves which have a quick adjustment mechanism supported by secured runners Divider system must lock in place with supporting hardware. Approximate Height: 77.25 Approximate Width: 38.25 Approximate Depth: 28 QTY: 94 EA ALUMINUM DUST COVER/VERTICAL LABEL MOUNT PLATE Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Solid dust cover with interlocking mechanism for rack 1 Front Lip with 20 Centered Label Holder Holes predrilled and tapped Must accommodate vertical and horizontal labeling systems that are color-coded by department Anodized Aluminum to colormatch vertical frame system Approximate Height: 1.25 Approximate Width: 22 Approximate Depth: 28 QTY:8 EA OVERSIZE ALUMINUM DUST COVER/VERTICAL LABEL MOUNT PLATE Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Solid dust cover with interlocking mechanism for rack 1 Front Lip with 20 Centered Label Holder Holes predrilled and tapped Must accommodate vertical and horizontal labeling systems that are color-coded by department Anodized Aluminum to colormatch vertical frame system Approximate Height: 1.25 Approximate Width: 36 Approximate Depth: 28 QTY: 94 EA ACRYLIC COLOR LABEL - TEXT ADDED POST INSTALLATION Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Transparent Acrylic Panel Custom Lettering Added Post Installation (2) 20 Mounting Holes Predrilled Mounting holes to accept Push-Lock Label Mount Plugs Color Matched to Side Panels QTY: 120 EA HALF COLORPANEL FOR SIDE - END UNIT, CUSTOMIZED TO DEPARTMENT AND COLOR Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Transparent Acrylic Panel Custom Lettering Added Post Installation (6) 28 Mounting Holes Predrilled Mounting holes to accept Push-Lock Label Mount Plugs Color Matched to Top Panels QTY: 34 EA 3060 WORKBENCH - PUSH-BUTTON HEIGHT ADJUST Shall be brand name (DSI) or equal to DSI shelving QTY: 5 EA 35 CM LONG: MODU-CORE "A" BASKET HANDLE, FITS ALL BASKETS AND TRAYS - VERTICAL HANDLE SYSTEM Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: 35CM Mounting Holes 2 Label Face Slide-Stop Basket Lock mounting system Clear Acrylic to match baskets Colored Insert to Match Top/Side Labels QTY: 208 EA No Hassle DSI or equal, Lifetime Warranty Shall be brand name (DSI) or equal to DSI warranty Specifications/Salient Characteristics: MODU-Core No-Hassle Lifetime Warranty to cover all products Free Shipping on all Warranty Requests Free site survey to assess Warranty claim needs QTY: 1 EA DSI Complementary IAHCSMM Certified Central Sterile Vendor Partner Site Assessment Shall be brand name (DSI) or equal to DSI shelving Specifications/Salient Characteristics: Onsite Storage Review Laser Measurements of Each Room Product Measurements 2D and 3D CAD Layouts following survey Multiple Layout options for each room Free design/layout changes QTY: 1 EA COMPLETE ONSITE ASSEMBLY AND INSTALLATION Shall be brand name (DSI) or equal to DSI installation Specifications/Salient Characteristics: Complete onsite assembly and installation services. QTY:1 EA NAICS CODE 337215-Showcase, Partition, Shelving, and Locker Manufacturing. Interested parties may submit a capability statement, authorization letter from the Original Equipment Manufacturer (OEM), and past performance. Interested vendors must be registered in SAM. Solicitation# 36C24822Q0901 is anticipated to be posted to the Beta.SAM.gov website on or about 05/2/2022, closing 05/20/2022. Quoters should continue to monitor Beta.SAM.gov for the RFQ and any subsequent Amendments to this RFQ. THIS IS NOT A REQUEST FOR QUOTES AT THIS TIME. All Quoters must be registered in the System for Award Management (SAM) database, see https://www.sam.gov with complete online Reps and Certs. James A. Haley is seeking capable SDVOSB s/VOSB s to provide