Inactive

The Department of Veterans Affairs, VISN 6 Network Contracting Office (NCO) is conducting Market Research through this source sought to help determine the availability of qualified Service-Disabled Ve... The Department of Veterans Affairs, VISN 6 Network Contracting Office (NCO) is conducting Market Research through this source sought to help determine the availability of qualified Service-Disabled Veteran Owned Small Businesses (SDVOSB), Veteran Owned Small Businesses (VOSB) and Small Businesses (SB), capable of supplying Push-Behind Scrubbers for the Richmond VAMC. This requirement will be one time buy. Salient Characteristics Stand On Cylindrical Scrubber Stand-on cylindrical scrubber used for cleaning large facilities. 26 Cylindrical Scrub Deck 36V/234 Ah AGM batteries, on-board charger Scrubber is able to handle a 10% climbing grade Scrubber Specifications: Cleaning Path Width: between 22 and 28 26 SP, with a cylindrical white brush soft Brush Speed: 200-450 rpm Floating and Locked Brush Pad Pressure Max. Transport Speed: No more than 4.5 mph Max Working Speed: Between 3 and 3.3 mph Productivity Rate: Between 25,000 30,000 sq ft/hr Noise: 60-70 dBA Minimum Turning Radius: 2.5 ft. Dimensions: 56 L x 33 W x 50 H (inches) Solution Tank Capacity: 25 gal (recovery tank: 27 gal) Stand on Burnisher Stand-on floor burnisher used for cleaning large facilities. 20-inch 2000 rpm pad driver for high gloss performance Spring loaded weighted pad that does not require any end-user adjustment for use. Passive Dust Control w/ onboard disposable dust bag 36V/234 Ah AGM batteries, on-board charger to be used with a standard wall outlet Burnisher is able to handle a 10% climbing grade Burnisher Specifications: Cleaning Path Width: between 18 and 22 20 Pad with a 3 pad motor Brush Speed: 2000 rpm Max. Transport Speed: No more than 3 mph Max Working Speed: No more than 2.5 mph Productivity Rate: Between 20,000 and 25,000 sq ft/hr Noise: 60-63 dBA Minimum Turning Radius: 2 ft. Dimensions: 44 L x 23.5 W x 51.75 H (inches) Stand on 20 Scrubber Stand-on 20 Scrubber, poly brush scrub deck 36V/114 Ah AGM batteries, on-board charger Scrubber is able to handle a 10% climbing grade Scrubber Specifications: Cleaning Path Width: between 18 and 22 Vacuum: Between 0.6 and 0.65 hp Solution/recovery capacity 10/10 gallons Water Lift: 47.3 in of water Max. Transport Speed: No more than 2.5 mph Max Working Speed: No more than 2.5 mph Productivity Rate: Between 18,000 20,000 sq ft/hr Noise: 60-70 dBA Minimum Turning Radius: 2.10 ft. Dimensions: 44 L x 27.2 W x 51.75 H (inches) Ride-on Scrubber Drier, Large Areas Ride-on scrubber and drier used for cleaning large facilities. All wheel drive to handle a gradient of at most 10% Transport and Cleaning Speed of up to 6.2 mph Must be able to sweep, scrub, and vacuum in a single operation Side brushes can be turned on and off Brush head, squeegee and side brushes can be lowered automatically and raised when put into reverse Able to control the contact pressure, water volume, turbine power, roller speed and brush heads Auto-Fill Tank (tank can be filled with an external hose and a conventional coupling) Automatic Tank Rinsing 30 disc brush head 312 Ah, AGM, batteries, on-board charger Scrubber is able to handle a 10% climbing grade Scrubber Specifications: Working Width, brushes: 30 Working Width, vacuuming: 37 Fresh Water tank capacity: 40 gal Dirty Water tank capacity: 40 gal Practical Area Performance: between 33,000-40,000 sf per hour Water Flow: 2 gpm Brush Speed: 600-1300 rpm Power Consumption: 2,800 W, must have an eco mode as well, around 1680 W) Voltage Supply: 36 v Driving and Cleaning Speed: 3.7 mph Weight: 950 lbs 1,150 lbs. Dimensions: 65 L x 31W x 56 H (inches) Waste Container: 2 gallons Must include: Roller Brush Integrated Sweeping Mechanism Auto-Fill Tank Ecoefficiency mode Charger Batter 312 Ah, AGM Side Brushes Curved 940mm Squeegee Interested sources shall indicate that they are capable of providing the required supply/services and must provide the following: 1) Full name and address of the firm 2) Size status (i.e., small business, 8(a), HUBZone, Service Disabled Veteran Owned small business 3) Offer item(s) on schedule or open market 4) Capability statement 5) NAICS Code 6) If small business, can your company meet the requirements specified in FAR 52.219-14, limitations on Subcontracting. Additional, at time of quote company must be registered in SAM.gov and if not the manufacturer provide a authorized distributor/licenser letter from the manufacture. No other information is required at this time. The capability statements received from this market research are for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research, and the Government will not entertain questions concerning this market research. The Government will not assume any costs incurred by the contractor in the preparation of responses. All responses shall be submitted in writing no later than August 14th, at 12:00PM EST to the attention of: Jake.Puckett@va.gov Please title the subject line for all responses as: Ride-on Scrubbers: 36C246-24-AP-4431.