Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

2 PUBLIC ANNOUNCEMENT FOR PROCUREMENT OF ARCHITECT-ENGINEERING (A/E) SERVICES: This is a request for Standard Form (SF) 330, Architect-Engineer Qualifications only. A-E Services are being procured in ... 2 PUBLIC ANNOUNCEMENT FOR PROCUREMENT OF ARCHITECT-ENGINEERING (A/E) SERVICES: This is a request for Standard Form (SF) 330, Architect-Engineer Qualifications only. A-E Services are being procured in accordance with the Selection of Architects and Engineers Statute (Public Law 92-582), formerly known as the Brooks Act, and implemented in Federal Acquisition Regulation (FAR) subpart 36.6. All submissions will be evaluated in accordance with the below selection criteria. The Government will not pay, nor reimburse, any costs associated with responding to this request. The Government is under no obligation to award a contract as a result of this announcement. Firms will be selected based on demonstrated competence and qualifications for the required work. Any resulting award for the proposed A/E services will be procured under a negotiated Firm-Fixed Price contract. The NAICS Code for this acquisition is 541330, Engineering Services, and the applicable Small Business Size Standard is $25.5 million annual revenue. During a performance, the selected A/E firm will be required to attend meetings in person, on-site, at the Salem VA Medical Center, 1970 Roanoke Blvd, Salem, VA 24153. THIS ANNOUNCEMENT IS NOT A REQUEST FOR AN AE FEE PROPOSAL. NO FEE PROPOSAL SHALL BE REQUESTED UNTIL AFTER AN EVALUATION HAS BEEN MADE ON THE PROVIDED S330 AND THE TOP-RATED FIRM SELECTED. Submit current SF330 to bryant.guerrant@va.gov. The SF330 are due on Wednesday, February 14, 2024 @ 10:00AM EST. See Electronic Submission Requirements on page 3 and 4 for instructions on submitting your SF330. The selection of the most qualified contractor will follow the guidance provided in FAR 36.6 Architect-Engineer Services. The Government will not pay, nor reimburse, any costs associated with responding to this request. The Government is under no obligation to award a contract as a result of this announcement. Firms will be selected based on demonstrated competence and qualifications for the required work. All offerors are advised that in accordance with VAAR 836.606-73 the total cost of the architect or engineer services contracted for must not exceed 6 percent of the estimated cost of the construction project plus any fees for related services and activities. Additionally, FAR Clause 52.236-2 (c) - Design Within Funding Limitation, will be applicable to this procurement action. Design limitation costs will be provided to the most highly rated AE firm selected to complete the design. Important Notice: Apparent successful offerors must apply for and receive verification from the Department of Veteran Affairs Center for Veterans Enterprise (CVE) in accordance with 38 CFR Part 74 and VAAR 819.70 by submission of documentation of Veteran status, ownership and control sufficient to establish appropriate status, offerors must be both VISIBLE and VERIFIED by the Department of Veteran Affairs Center for Veterans Enterprises at the time of submission of proposal. Failure to be both VERIFIED by CVE and VISIBLE on VetCert at the time of proposal submission, time of interview, and at time of award will result in the offeror s proposal being deemed non-responsive. All offerors are urged to contact the CVE and submit the required documents to obtain CVE verification of their SDVOSB status if they have not already done so. Contract Award Procedure: Before a small business is proposed as a potential contractor, they must be registered in the System for Award Management (SAM) website located at https://sam.gov. Failure of a proposed SDVOSB to be VERIFIED by CVE and VISIBLE in Veteran Small Business Certification (VetCert) at https://veterans.certify.sba.gov and registered in SAM at the time the SF 330 is submitted shall result in elimination from consideration as a proposed contractor. The proposed services will be obtained by a Negotiated Firm-Fixed Price Contract. The review/design of architectural, structural, mechanical, electrical, civil, or other engineering features of the work shall be accomplished by architects or engineers registered in a State or possession of the United States, or in Puerto Rico or in the District of Columbia. The project drawings/design shall follow applicable standards and codes described in VA Program Guides and design materials. Master Construction Specifications Index, VA Construction Standards Index, VA Standards Index, and Criteria are available in the Technical Information Library (TIL) on VA Website address: http://www.cfm.va.gov/til/. The submitted SF 330s will be evaluated in accordance with the following eight criteria from the Federal Acquisition Regulation Part 36.602-1 and Veteran Administration Acquisition Regulation Subpart 836.602. Then a minimum of three of the most highly qualified firms will be selected to hold discussions regarding concepts and relative utility of alternative methods of furnishing the required services. A fee proposal will be requested from the top- rated firm chosen. SELECTION CRITERIA: Professional qualifications necessary for satisfactory performance of required services; Specialized experience and technical competence in the type of work required, including, where appropriate, experience in energy conservation, pollution prevention, waste reduction, and the use of recovered materials; Capacity to accomplish the work in the required time; Past performance on contracts with Government agencies and private industry in terms of cost control, quality of work, and compliance with performance schedules; Location in the general geographical area of the project and knowledge of the locality of the project; provided, that application of this criterion leaves an appropriate number of qualified firms, given the nature and size of the project; Reputation and standing of the firm and its principal officials with respect to professional performance, general management, and cooperativeness; Record of significant claims against the firm because of improper or incomplete architectural and engineering services; and Specific experience and qualifications of personnel proposed for assignment to the project and their record of working together as a team. The awarded A/E firm will prepare drawings and specifications in enough detail such that qualified outside General Contracting companies can prepare accurate and timely proposals for the desired work. The awarded A/E firm is responsible for ensuring that the specifications and drawings supplied fully represent all the work described in the Request for Proposal (RFP). The Medical Center must remain operational throughout the construction period and a detailed sequence of work will be provided by the A/E to minimize impact of the construction. The SF 330 can be downloaded through the GSA Forms Library at: http://www.gsa.gov/portal/forms/type/TOP, type in SF 330 in the Find a Form block and click on search. In accordance with Federal Acquisition Regulation Part 36.209, no contract for the construction of a project shall be awarded to the firm that designed the project or its subsidiaries or affiliates, except with the approval of the head of the agency or authorized representative. In addition, contractors are notified of the award via an electronic Notice of Award e-mail. The award document will be attached to the Notice of Award e-mail. Acceptable Electronic Formats (Software) for Submission of Offers: Note: Only Electronic copies will be accepted Files readable using the current Microsoft* Office version Products: Word, Excel, and PowerPoint. Please see security note below for caution regarding use of macros. When submitting construction drawings contractors are required to submit one set in AutoCAD and one set in Adobe PDF (purpose: contracting can open the PDF version and engineering can open AutoCAD files). Files in Adobe* PDF (Portable Document Format) Files: When scanning documents scanner resolution should be set to 200 dots per inch, or greater; E-mail Submission Procedures: For simplicity in this guidance, all submissions in response to a solicitation will be referred to as offers. Subject Line: Include the solicitation number, name of company, and closing date of solicitation; Size: Maximum size of the e-mail message shall not exceed ten (10) megabytes. Only one email is permitted unless otherwise stated in this paragraph or in writing by a Contracting Officer; and The offer will be date and time stamped by the Microsoft Email system and will be the official record of receipt for the submission. SECURITY ISSUES, LATE BIDS, UNREADABLE OFFERS: Late submission of offers is outlined at FAR Parts 52.212-1(f), 52.214-7, and 52.215-1(c) (3). Particular attention is warranted to the portion of the provision that relates to the timing of submission. Please see FAR 15.207(c) for a description of the steps the Government shall take regarding unreadable offers. To avoid rejection of an offer, vendors must make every effort to ensure their electronic submission is virus-free. Submissions or portions thereof submitted and which the automatic system detects the presence of a virus, or which are otherwise unreadable will be treated as unreadable pursuant to FAR Parts 14.406 and FAR 15.207(c). The virus scanning software used by our e-mail systems cannot always distinguish a macro from a virus. Therefore, sending a macro embedded in an e-mail message or an e-mail attachment may cause the e-mail offer to be quarantined. You may send both the spreadsheet and the spreadsheet saved in PDF format to ensure that your proposal is readable. Password protecting your offer is not permitted. The Contracting Officer will file the offer electronically which will allow access only by designated individuals. 852.219-73 VA NOTICE OF TOTAL SERVICE-DISABLED VETERAN-OWNED SMALL BUSINESS SET-ASIDE VA Notice Of Total set-Aside For Verified Service-Disabled Veteran-Owned Small Businesses (NOV 2022) (a) Definition. for the Department of Veterans Affairs, Service-disabled Veteran-owned small business concern or SDVOSB : (1) Means a small business concern - (i) Not less than 51 percent of which is owned by one or more service-disabled Veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled Veterans or eligible surviving spouses (see VAAR802.101, Surviving Spouse definition); (ii) The management and daily business operations of which are controlled by one or more service-disabled Veterans (or eligible surviving spouses) or, in the case of a service-disabled Veteran with permanent and severe disability, the spouse or permanent caregiver of such Veteran; (iii) The business meets Federal small business size standards for the applicable North American Industry Classification System (NAICS) code identified in the solicitation document; (iv) The business has been verified for ownership and control pursuant to 38 CFR part 74 and is listed in VA's Vendor Information Pages (VIP) database at https://www.vetbiz.va.gov/vip/; and (v) The business will comply with VAAR subpart 819.70 and Small Business Administration (SBA) regulations regarding small business size and government contracting programs at 13 CFR parts 121 and 125, provided that any reference therein to a service-disabled veteran-owned small business concern or SDVO SBC, is to be construed to apply to a VA verified and VIP-listed SDVOSB, unless otherwise stated in this clause. (2) The term Service-disabled Veteran means a Veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). (3) The term small business concern has the meaning given that term under section 3 of the Small Business Act (15 U.S.C. 632). (4) The term small business concern owned and controlled by Veterans with service-connected disabilities has the meaning given the term small business concern owned and controlled by service-disabled veterans under section 3(q)(2) of the Small Business Act (15 U.S.C. 632(q)(2)), except that for a VA contract the firm must be listed in the VIP database (see paragraph (a)(1)(iv) of this clause). (b) General. (1) Offers are solicited only from VIP-listed SDVOSBs. Offers received from entities that are not VIP-listed SDVOSBs at the time of offer shall not be considered. (2) Any award resulting from this solicitation shall be made to a VIP-listed SDVOSB who is eligible at the time of submission of offer(s) and at the time of award. (3) The requirements in this clause apply to any contract, order or subcontract where the firm receives a benefit or preference from its designation as an SDVOSB, including set-asides, sole source awards, and evaluation preferences. (c) Representation. Pursuant to 38 U.S.C. 8127(e), only VIP-listed SDVOSBs are considered eligible to receive award of a resulting contract. By submitting an offer, the prospective contractor represents that it is an eligible SDVOSB as defined in this clause, 38 CFR part 74, and VAAR subpart 819.70. (d) Agreement. When awarded a contract action, including orders under multiple-award contracts, an SDVOSB agrees that in the performance of the contract, the SDVOSB shall comply with requirements in VAAR subpart 819.70 and SBA regulations on small business size and government contracting programs at 13 CFR part 121 and part 125, including the non-manufacturer rule and limitations on subcontracting requirements in 13 CFR 121.406(b) and 13 CFR 125.6. Unless otherwise stated in this clause, a requirement in 13 CFR parts 121 and 125 that applies to an SDVO SBC, is to be construed to also apply to a VIP-listed SDVOSB. For the purpose of limitations on subcontracting, only VIP-listed SDVOSBs (including independent contractors) shall be considered eligible and/or similarly situated (i.e., a firm that has the same small business program status as the prime contractor). An otherwise eligible firm further agrees to comply with the required certification requirements in this solicitation (see 852.219-75 or 852.219-76 as applicable). These requirements are summarized as follows: (1) Services. In the case of a contract for services (except construction), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance to firms that are not VIP-listed SDVOSBs (excluding direct costs to the extent they are not the principal purpose of the acquisition and the SDVOSB/VOSB does not provide the service, such as airline travel, cloud computing services, or mass media purchases). When a contract includes both services and supplies, the 50 percent limitation shall apply only to the service portion of the contract. (2) Supplies/products. (i) In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), the SDVOSB prime contractor will not pay more than 50% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not VIP-listed SDVOSBs. When a contract includes both supply and services, the 50 percent limitation shall apply only to the supply portion of the contract. (ii) In the case of a contract for supplies from a non-manufacturer, the SDVOSB prime contractor will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) has been granted. Refer to 13 CRF 125.6(a)(2)(ii) for guidance pertaining to multiple item procurements. (3) General construction. In the case of a contract for general construction, the SDVOSB prime contractor will not pay more than 85% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, to firms that are not VIP-listed SDVOSBs. (4) Special trade construction contractors. In the case of a contract for special trade contractors, no more than 75% of the amount paid by the government to the prime for contract performance, excluding the cost of materials, may be paid to firms that are not VIP-listed SDVOSBs. (5) Subcontracting. An SDVOSB must meet the NAICS size standard assigned by the prime contractor and be listed in VIP to count as similarly situated. Any work that a first tier VIP-listed SDVOSB subcontractor further subcontracts will count towards the percent of subcontract amount that cannot be exceeded. For supply or construction contracts, the cost of materials is excluded and not considered to be subcontracted. When a contract includes both services and supplies, the 50 percent limitation shall apply only to the portion of the contract with the preponderance of the expenditure upon which the assigned NAICS is based. For information and more specific requirements, refer to 13 CFR 125.6. (f) Joint ventures. A joint venture may be considered eligible as an SDVOSB if the joint venture is listed in VIP and complies with the requirements in 13 CFR 125.18(b), provided that any requirement therein that applies to an SDVO SBC is to be construed to apply to a VIP-listed SDVOSB. A joint venture agrees that, in the performance of the contract, the applicable percentage specified in paragraph (d) of this clause will be performed by the aggregate of the joint venture participants. VETERANS AFFAIRS MEDICAL CENTER SALEM, VA 24153 A/E SCOPE PROJECT NO. 658-24-106 Replace Building 16 HVAC General Description of Services: Provide professional engineering services to include investigative surveys and reports, intricate phasing design, planning, consultation and visits, design work, preparation of contract drawings and specifications, preparation of cost estimates and provision of construction period services as necessary for demolition, construction, inspection, testing and certification for all required components for project 658-24-106 Replace Building 16 HVAC, at Salem VA Medical Center (VAMC) Salem, Virginia. Design Criteria: The intent of this Project is to upgrade and replace two (2) heat pump HVAC systems in Building 16. Project will include demolition of the existing two systems and equipment located in mechanical rooms in the basement and 1st floors, repair/upgrade/replace mechanical equipment, duct work, and all other associated components to provide a complete air handling and distribution system that conforms to all VHA requirements. An important requirement of this design will be to give the VA a minimum of three replacement options. Options shall evaluate the use of exterior pad mounted equipment and roof mounted equipment along with the use of existing campus chilled water/steam and standalone equipment. These design requirements shall be fully detailed in an options analysis report to include preliminary drawings and initial estimates. AE shall not proceed with the schematic design until the VA has selected their preferred option. This design shall utilize the latest VA Technical Information Library (VA TIL) Design Manuals for all aspects of the HVAC design. This project shall evaluate the existing space and provide the best options to the VAMC for completing the renovation with the least amount of disruption to the staff and functions. The project design shall require phasing plan(s) for outages and corresponding infection control plans to protect adjacent hospital areas during construction. The design shall include accelerated construction scheduling to the extent possible for minimizing medical service line downtime. The design package shall include complete drawings, construction specifications, detailed cost estimate(s), and other pertinent documents for advertisement of a contract for construction. Among other improvements, the design shall also incorporate installation of monitoring systems for reporting and identification of air quality, humidity, and other critical environmental data within each room. Construction Amount: The project is to be designed within an estimated base construction cost of $700,000. If the base bid cost exceeds budget and deduct alternates do not bring the project within the construction budget, the A/E shall redesign or take steps necessary to reduce cost so that budget limitations are not exceeded. Design Standards: The project design shall be completed in accordance with this A/E scope and all appropriate Department of Veterans Affairs (VA) standards, specifications, and other criteria unless otherwise approved by the VA. The A/E shall retrieve all VA design information and standards from the VA Facilities Web Site (http://www.va.gov/facmgt/standard). These documents and all national, state and local codes adopted and used by the VA shall be incorporated into the design of this project and reflected in the construction cost estimate. At a minimum, the following references, as applicable, shall be utilized for planning and design purposes. The facility record drawings and AutoCAD files are available for the A/E s use. NOTE: Not all record drawings are available on AutoCAD. Additionally, the A/E must field verify the accuracy of all facility record drawings. All the HVAC design shall meet or exceed the follow guidelines: VA BIM Manual v2.2 VHA Program Guide PG-18-3 VA Master Construction Specifications Structural Design Manual H-18-8 Seismic Design Requirement Sanitary Design Manual for Hospital Projects PG-18-13 Barrier Free Design Handbook Life Safety Codes Electrical Design Manual HVAC Design Manual PG-18-10 Government Record Drawings (A/E shall field verify conditions) PG-18-15 A/E Submission Requirements. Physical Security Design Manual (Final Draft) BIM Requirements: AE shall use IFC compliant parametric Building Information Modeling (BIM) as the architectural/ engineering software for project design. Reference VA BIM Manual v2.2 for BIM standards. Site Investigation: AE shall hire an independent 3rd party consultant to conduct a survey of existing conditions using 3D laser scanning software and produce a 3D BIM LOD 300 Model. This model shall serve as the base model for development of the project design. The following deliverable shall be provided by the consultant: Intensity Map Point Cloud files (.rcs format) 2D AutoCAD Floor Plans 2D Point Cloud Sheets 3D Model at LOD300 level produced using IFC compliant BIM software Energy Requirements: In order for new construction and applicable renovations to meet the Federal Government s standard for a sustainable building the following shall be incorporated into the project: Any facet of renovation must meet the minimum requirements of ASHRAE Standard 90.1 2010 or most current standard effective at the time of AE contract award. A one-page summary of key components will be provided with the design information from the VA. The summary which will be provided is not all encompassing, and the Standard s compliance report shall be submitted at the Final Design phase for each facet of the design as required by the standard. In addition to the ASHRAE Standard 90.1 compliance reports, the A/E shall evaluate applicability of VHA requirements with regards to LEED or Green Globe certification and make a recommendation to the VA with regards to applicability to this Project. The final decision with regards to applicability of certification requirements shall rest with the VA. The project shall be designed to meet all applicable energy conservation requirements and goals currently in effect within the VHA design requirements. Construction Estimate & Schedule: AE shall provide an estimate of construction project costs and duration including simplified schedule to include progress and final inspections and all work required for the base bid and the bid alternatives. Cost estimates and schedules shall be revised for each design submittal. AE shall prepare cost estimate and preliminary schedule in accordance with PG-18-15 A/E Submission Requirements. Equipment List: The design shall require that the construction/installation contractor provide a complete report containing the list of items installed in the project which will require periodic maintenance or observation, the frequency of required maintenance/observation, details of the maintenance, and any other information necessary to inform future maintenance activities of the Medical Center maintenance staff. The A/E shall provide for a complete review of this report submittal as part of Construction Period Services rendered by the A/E and shall coordinate this report/list with Logistics Services to insure all applicable items are addressed for future maintenance and proper registry of the items into the Medical Center s tracking systems for maintenance and property disposition. Construction Schedule and Phasing Requirements: Contractor shall provide a construction IAW AE submission PG 18-15 for the project. Deliverables: Quantities of design review materials for each design submission are provided below. Schematic Design, Design Development, Construction Document Submissions: One complete set (1) Arch D (24 x 36) size sets of the design drawings. One set (1) Arch D (24 x 36) size sets of the design drawings separated and bound by each discipline. Three (3) Arch C (18 x 24) size sets of the design drawings. One hardcopy (1) copy of edited/marked-up VA Master Specifications of each discipline and VA Master Specification Table of Contents including a key detailing required specifications for each of the severable components. One (1) hardcopy of Budgetary cost estimate One (1) electronic copy of the AE Preliminary Schedule (must reflect work hour restrictions) One hardcopy of design narratives and investigative reports. BIM Model and drawing files in BIM Software format. One (1) electronic set of all design deliverables in (pdf format). Final Construction Document Submission: One complete set (1) Arch D (24 x 36) size sets of the design drawings. Three (3) Arch C (18 x 24) size sets of the design drawings. Two (2) sets complete typed reproducible specifications (unbound) plus a copy on CD ROM in Word format. Note: The specification sections shall be one document on the CD ROM, not individual documents. These shall also incorporate Sections edited by the Salem VAMC in Sections 00 and 01. (ADD NOTE for PDF specifications to have sections AND ONLY the sections book marked.) Two (2) copies of typed Final cost and schedule estimates, plus a copy on CD ROM in Excel format. One (1) hardcopy of design narratives and investigative reports. One (1) electronic set of all design deliverables in (pdf format). BIM Model and drawing files in BIM Software format. One (1) copy of the final scope of work and including base bid and all deduct alternates in Microsoft Word Format. Each bid item and deducts shall have the estimated cost and duration included for that item of work based on the final AE cost estimate and preliminary schedule. Two (2) sets of final digital engineering calculations (if applicable). List of sole source items with justification (if applicable). List of Or-equal items with justification (if applicable). Schedule of Deliverables: Task Name Duration Upgrade Replace Building 16 HVAC 215 NTP/Design Conference 1 Option Analysis 30 Option Analysis Review 15 Schematic Design 45 Schematics Review 15 Schematics Design Meeting 1 Design Development 45 Design Development Review 15 Design Development Meeting 1 Construction Document Development 15 Construction Document Review 15 Construction Document Design Meeting 1 Final Construction Document Development 15 Final Construction Documents Received 1 All deliverables are required 215 days from NTP. This schedule is provided for planning purposes. The selected A/E must be able to deliver on this timeline; dates subject to change based on actual NTP. The A/E shall develop a design schedule and provide monthly progress updates throughout the design process. As-Builts: Upon completion of construction and incorporation of all revisions required to complete the Building Information Model and record drawings, the following items shall be submitted: Two (2) sets of reproducible hard copy as-built plans (30 X 42 ) plus a copy on CD-ROM in AutoCAD format, current release. One (1) electronic copy of complete Building Information Model on CD. INSTRUCTIONS TO OFFERORS FOR PROPOSAL PREPARATION THIS SECTION IS FOR SOLICITATION PURPOSES ONLY. THIS SECTION WILL BE PHYSICALLY REMOVED FROM ANY RESULTANT AWARD, BUT WILL BE DEEMED INCORPORATED BY REFERENCE. (a) GENERAL INSTRUCTIONS: 1. All proposal preparation cost will be the sole responsibility of the Offeror. The Government will not reimburse any firm for their proposal preparation cost. Technical proposals of each offeror will be evaluated independently. All copies shall therefore be labeled with the offerors name, business address, and VA Solicitation Number. To assure timely and equitable evaluation of proposals, Offerors must follow the instructions contained herein. Offerors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Failure to meet a requirement may result in an offer being ineligible for award. Offerors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. A firm will not be considered if its SF 330 Part I is not signed, unless the SF 330 Part I is accompanied with a signed cover letter or a current signed SF 330 Part II. If a firm does not submit a SF 330 Part II with its SF 330 Part I, or have one on file, it will not be considered (FAR 36.603(b)). The offer shall consist of two separate parts: Part I - TECHNICAL CAPABILITY Part II PAST PERFORMANCE (b) SPECIFIC INSTRUCTIONS 1. PART I - TECHNICAL PROPOSAL - Submit one (1) digital copy to bryant.guerrant@va.gov and one (1) mail hard copy to Bryant Guerrant (see address information below) Professional Qualifications, Design Schedule & Experience shall be limited to no more than 15 pages total. The Design Quality Control plan shall be limited to no more than 10 pages total. Format as follows: TAB A: General Information Cover page with Solicitation Number and Project Title Table of Contents Company information to include: DUNS Number, Cage Code, Tax ID Number, Principal points of contact with addresses, phone numbers and email addresses. TAB B: TECHNICAL CAPABILITY (Evaluation Factor 1) Specialized Experience and Technical Competence Sub Factor 1 Professional Qualifications Sub Factor 2 Capacity - Sub Factor 3 Knowledge of the Locality Sub Factor 4 Design Quality Control Plan Sub Factor 5 Experience in Construction Period Services Sub Factor 6 (c) GENERAL INFORMATION Pages exceeding the page limitations set forth will not be evaluated and will be removed from the proposal. Format for proposal Part I & II shall be as follows: A page is defined as one face of an 8 ½ x 11 sheet of paper containing information. Typing shall not be less than 12-point font. The Offeror, separately (but included in the same sealed envelope) shall submit one (1) digital copy to bryant.guerrant@va.gov and one (1) mail hard copy to Bryant Guerrant (see address information below) Each response shall address each factor in the sequence listed and clearly identify which factor is being addressed. There shall be no mention of costs in the Technical Proposal. Proposals shall be submitted in a sealed envelope and delivered to the address below by or on the set forth due date: Salem VA Medical Center Attn: Bryant Guerrant, Contract Specialist 1970 Roanoke Boulevard Building 74, Room 211 Salem, Virginia 24153 FEDERAL HOLIDAYS: The following Federal Legal Holidays are observed by this Medical Facility: New Year s Day 1 January Martin Luther King s Birthday Third Monday in January Presidents Day Third Monday in February Memorial Day Last Monday in May Independence Day 4 July Juneteenth 19 June Labor Day First Monday in September Columbus Day Second Monday in October Veterans Day 11 November Thanksgiving Day Fourth Thursday in November Christmas Day 25 ...