Inactive Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside (FAR 19.14)

QUESTIONS AND ANSWERS: Answers are highlighted NO MORE QUESTIONS WILL BE EXECPTED AFTER 02/02/2022: 1) Other than the items listed here, what other changes are incorporated in this re-solicitation: S... QUESTIONS AND ANSWERS: Answers are highlighted NO MORE QUESTIONS WILL BE EXECPTED AFTER 02/02/2022: 1) Other than the items listed here, what other changes are incorporated in this re-solicitation: SEE STATEMENT OF NEED (SON) SAYS BRAND NAME OR EQUAL - removing specification details from ITEM NUMBER 0001 and increasing the DELIVERY DATE from 30 DAYS ARO to 200 days ARO (both page 4 of 45 in 36C24422Q0328.pdf ); SPECIFICATION IS ON THE SON DID NOT NEED TO BE ON CLIN 0001 - requiring Forward Facing Driving only (page 5 of 45 in 36C24422Q0328.pdf ); and, THIS IS A MUST AS STATED BEFORE - deleting some of the WARRANTY REQUIREMENTS (page 7 of 45 in 36C24422Q0328.pdf )? THIS HAS NOT BEEN CHANGED IT IS THE SAME REQUIRMENT IN THE SON Upon review of the revised solicitation, there were no notes or highlights to update vendors on the changes from the prior solicitation. IT WAS CANCELED NOT NEEDED IT THE CANCELLATION IT SAYS A NEW RFQ WILL BE PROVIDED.  2) Can the Offer Due Date be changed from 01-31-2022 9:00 AM EST to 02-07-2022 9:00 AM EST?  The new solicitation only provides vendors two (2) business days prior to the submission deadline YES, THIS HAS BEEN EXTENDED UNTIL 02/07/2022 AND IS POSTED IN WWW.BETA.SAM.GOV  3) [ AMENDED ] What are the correct specifications for the forks?  PLEASE READ THE SON IT IS IN THERE WHAT SIZE FORKS. The following conflicting solicitation specifications are found in the spec error mark-ups_36C24422Q0328_rev.pdf  file (marked-up with color coded highlights for the submitted questions): - 42 (1067mm) Tapered Forks; NOT NEEDED - 36 (914mm) Forks; and, ONLY THIS 36 (914MM) FORKS - 34 (864mm) Wide Fork Carriage. NOT NEEDED Please confirm the fork dimensions; we don t believe that multiple fork sizes are required.  4) What is the correct backrest specification?  The following conflicting solicitation specifications are found in the spec error mark-ups_36C24422Q0328_rev.pdf  file (marked-up with color coded highlights for the submitted questions): - 36 (914mm) High Load Backrest; and, NOT THIS - 48 (1,200mm) High Load Backrest. THIS IS WHAT IS NEEDED 5) Please confirm that no charging equipment is required.  There is nothing in the solicitation specifications regarding a battery charger. These items must be included with the forklift truck. No extra charge for this battery charger. Under- Statement of Need:  Battery Charger Connections to Charge the Unit Battery Life: Must be able to be used for 18-24 hours of usage on one charge. 6) What is the voltage and type of power (i.e. - single phase or 3-phase) that the Coatesville Center will use to charge the truck battery? The voyage and type of power are needed to ensure that our proposal incorporates the correct type of battery. From market research: 208-volt single phase charger.