Inactive
Notice ID:36C24225Q0722
2 THIS REQUEST IS FOR SOURCES SOUGHT AND IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOS...
2 THIS REQUEST IS FOR SOURCES SOUGHT AND IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY AND DOES NOT CONSTITUTE A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This Sources Sought Notice is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this Sources Sought Notice is marked as proprietary and will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this Sources Sought Notice. SOURCES SOUGHT DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought Notice only. The purpose of this Sources Sought Notice is to gain knowledge of potential qualified sources and their size classification relative to NAICS code 333414 Heating Equipment, Hot Water Manufacturing (size standard of 500 employees). Responses to this Sources Sought Notice will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought Notice, a solicitation announcement may be published. Responses to this sources sought synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 02, Network Contracting Office 02, is seeking sources that can provide Electrical Water Pumps that at a minimum meets the following salient characteristics with a brand name or equal product (the VA is seeking domestic end products manufactured in the United States, or equivalent) : To be delivered to Building 200: Bell & Gossett Base Mounted End Suction Pump (P-5), Series e-1510, Model # 2GB, QTY: 1 Motor: Inverter duty, ODP Type, 7.5 HP/ 1750 RPM/ 460/3/60 (V/PH/HZ) Pump: 10.375 Impeller, 145 GPM at 100 FT-HD, 5.16 BHP Bell & Gossett Base Mounted End Pump (P-6, P-7), Series e-1510, Model # 4EB, QTY: 2 Motor: Inverter duty, ODP Type, 25 HP/ 1750 RPM/ 460/3/60 (V/PH/HZ) Pump: 10.75 Impeller, 700 GPM at 90 FT-HD, 18.90 BHP Silent check valve 4 , Metraflex, Model # CVOSS904, for P-5, QTY: 1 Check valve 8 , Crispin, Model # GC71.R, for P-6 and P-7, QTY: 2 Neoprene connector 4 , Mason, Model # Masonflex MFEJ, High pressure construction, CR Control Rods, for P-5, QTY: 2 Neoprene connector 6 , Mason, Model # Masonflex MFEJ, High pressure construction, CR Control Rods, for P-6 and P-7, QTY: 2 Neoprene connector 8 , Mason, Model # Masonflex MFEJ, High pressure construction, CR Control Rods, for P-6 and P-7, QTY: 2 To be delivered to Building 92: Bell & Gossett Base Mounted End Suction Pump (P-1, P-2), Series e-1510, Model # 2BD, QTY: 2 Motor: Inverter duty, ODP Type, 7.5 HP/ 1750 RPM/ 208/3/60 (V/PH/HZ) Pump: 9.50 Impeller, 200 GPM at 80 FT-HD, 5.12 BHP Bell & Gossett Vertical Inline Pump (P-3, P-4), Series e-80, Model # 1.5 x 1.5 x 9.5B, QTY: 2 Motor: Inverter duty, ODP Type, 3 HP/ 1750 RPM/ 208/3/60 (V/PH/HZ) Pump: 8.75 Impeller, 60 GPM at 75 FT-HD, 2.02 BHP Bell & Gossett Base Mounted End Suction Pump (P-5), Series e-1510, Model # 1.25BC, QTY: 1 Motor: Inverter duty, ODP Type, 2 HP/ 1750 RPM/ 208/3/60 (V/PH/HZ) Pump: 7.875 Impeller, 60 GPM at 55 FT-HD, 1.50 BHP All equipment stated above shall be delivered to the Northport VA medical center, warehouse building 36; Located at 79 Middleville Road, Northport, NY 11768. The period of performance will begin with a Notice to Proceed (NTP) issued after contract award. Total period of performance shall not exceed (120) days after NTP. This period of performance includes reasonable duration for submittal review and approval prior to ordering all equipment. The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: Please indicate the size status and representations of your business, such as but not limited to: Service Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified under this RFI? (3) Are you the manufacturer, distributor, or an equivalent solution to the items being referenced above? (4) If you are a large business, do you have any designated distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) If you intend to sub contract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to sub contracted work and completion of job. (7) Does your company have an FSS contract with GSA or the NAC or are you a contract holder with NASA SEWP or any other federal contract? If so, please provide the contract number. (8) If you are an FSS GSA/NAC or NASA SEWP contract holder or other federal contract holder, are the items/solution you are providing information for available on your schedule/contract? (9) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (10) Please submit your capabilities in regard to the salient characteristics being provided and any information pertaining to equal to items to establish capabilities for planning purposes? (11) Will the items you will be providing manufactured domestically in the United States or are they foreign manufactured items? (12) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (13) Please provide your Sam.gov Unique Entity ID number. *** Submissions addressing number (10) should show clear, compelling and convincing*** evidence that all equal to items" meet all the salient characteristics. Responses to this notice shall be submitted via email to JONATAN.RONDON@VA.GOV, Telephone responses shall not be accepted. Responses must be received no later than June 17th, 2025, 1600 EST. If a solicitation is issued it shall be announced at a later date, and all interested parties must respond to that solicitation announcement separately from the responses to this sources sought. Responses to this sources sought notice are not a request to be added to a prospective bidders list or to receive a copy of the solicitation.
