5430--Climate Controlled Storage unit and back-up office space for the James J. Peters (Bronx) VA Medical Center.
Page 2 of 2 Description: This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart... Page 2 of 2 Description: This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular, FAC Number 2025-03, effective date is 01/17/2025. This solicitation is set-aside for Service-Disabled, Veteran-Owned Small Businesses (SDVOSB). The associated North American Industrial Classification System (NAICS) code for this procurement is 332420, with a small business size standard of 750 employees. The FSC/PSC is 5430. Requirement: The James J. Peters VA Medical Center (Bronx) serves as a critical healthcare facility, providing comprehensive medical services to veterans. As part of the Emergency Management Department s commitment to readiness and response, the need for a half-storage, half-office space trailer has been identified. This trailer will specifically address the existing lack of space for the VA First Responder Decontamination Program (FDRP) equipment, ensuring that crucial emergency supplies are kept in a secure, climate-controlled environment. Additionally, the trailer will function as a backup office space to facilitate planning and coordination during emergency situations. By incorporating both storage and office functions this will enhance the medical center s ability to respond effectively to emergencies while maintain a high standard of preparedness and resources management. The contractor shall provide a fully customized half-storage, half-office space trailer, including delivery, setup, and on-site training. The trailer must be fully operational, climate-controlled, and equipped to support both office and storage functionalities as specified. Performance Work Statement (PWS) FDRP Storage and Back up office Space Scope of Work: The contractor shall provide a fully customized half-storage, half-office space trailer, including delivery, setup, and on-site training. The trailer must be fully operational, climate-controlled, and equipped to support both office and storage functionalities as specified. A walk-through/assessment of the site is highly recommended but not required. Performance Objectives: Deliver a 40-foot long, 8-foot wide, High Ceiling shipping container, fully compliant with ADA standards. Ensure the container is suitable for dual-purpose use: office planning space and equipment storage. Integrate all specified technical and structural components. Complete delivery, setup, and training within 90 days of contract award. Performance Requirements and general structure: Exterior Treatment: The exterior of the trailer shall be treated with snow and rust-resistant coatings to ensure durability and longevity in harsh weather conditions. Dimensions: 40 ft. (length) x 8 ft. (width). Exterior Finish: Brown outside wood cladding with VA logo. Entrances: Two separate doors, each with ADA-compliant ramps. 57inch Outdoor Wall Sconce, 3 Color 3000K/4500K/6000K, 50W, IP65 Waterproof Outside Long Wall Lights, Minimalist Linear Wall Lamp Lighting On each side of the front doors. Exterior Lighting: Modern Outdoor LED Wall Light Fixture, 36W LED Black Porch Light Waterproof Anti-Rust Aluminum Acrylic Outdoor Wall Lantern. Exterior 200 AMP Circuit Breaker Canopy over each door with LED lighting underneath Interior Lighting, Office Space Planning and Operations Area: Primary Workstation: Planning desk with wall-mounted file cabinet. Four 32-inch monitors (LG Smart Monitor with Airplay Capability). Two on each side of a triangular divider. (All Monitors mounted on to wall) Wall-mounted desk between monitors with a central file cabinet below. Wall-mounted power strips with outlets for USB and standard power. Secondary Workstation: An additional wall partition opposite the primary desk. Desk with two additional 32 -inch monitors (LG smart Monitors). Wall-mounted power strip with outlets for USB and standard power. Quad power outlets Storage Space: Full-length shelf system on one side. Secondary shelf system for quick access. Workbench with integrated under-storage. Power Access: Wall-mounted power strip with USB and power outlets attached to shelves on each side. 8 Quad outlets: 4 in each section Climate Control: Central HVAC System located on each end of the unit. Climate control in office capabilities to maintain comfort in office and storage areas. Interior Finishes: Insulation Panels: White Color to maintain a clean and professional appearance. Flooring: Gray wood vinyl, anti-slip, wear-resistant for safety and durability. Lighting: Color changing Led ceiling lights to provide uniform, energy efficient lighting. With Controls in office space. Windows: Strategically placed for ventilation and natural light. Windows treated to keep heat and cold out. Windows shatter proof. Each window equipment with special black out cordless roller shade. Technical and Utility Features: Electrical: Sufficient power outlets for computer monitors, lighting, and other equipment. Networking: Pre-wiring for communication and data systems. Insulation: Adequate thermal and acoustic insulation. Safety: Lockable doors and windows for security. Performance Standards: Delivery within 90 days of contract award. Full setup and operational capability upon delivery. Training for VA staff within one week of installation. Quality Assurance Surveillance Plan (QASP) Monthly evaluations for HVAC performance and electrical safety. Annual safety inspection for structural integrity and accessibility compliance. Deliverables/Reporting Requirements: Weekly progress reports during fabrication and delivery phases. Final inspection and functionality test upon arrival. Training completion report signed by VA staff. Period of Performance: The contractor shall complete the delivery, setup, and training within 90 days of contract award. Government-Furnished Property/Services: The VA will Provide Access to the designated installation site. Applicable Documents/References: ADA Standards for Accessible Design. VA Emergency Management Guidelines. VHAPG 813.106-1 (Comparative Evaluations). Drawings: Place of Performance/Place of Delivery VA Healthcare System James J. Peters VA Medical Center 130 West Kingsbridge Road Bronx, NY 10468-3904 The full text of FAR provisions or clauses may be accessed electronically at https://www.acquisition.gov/browse/index/far. The following solicitation provisions apply to this acquisition: FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://sam.gov/ in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services. If paragraph (j) of the provision is applicable, a written submission is required. FAR 52.212-2 Evaluation-Commercial Products and Commercial Services [In accordance with FAR 12.301(c) when the use of evaluation factors is appropriate, the contracting officer may (1) Insert the provision at 52.212-2, Evaluation-Commercial Products and Commercial Services, in solicitations for commercial products or commercial services (see 12.602); or (2) Include a similar provision containing all evaluation factors required by 13.106, subpart 14.2 or subpart 15.3, as an addendum (see 12.302(d)).] The following contract clauses apply to this acquisition: FAR 52.212-4, Contract Terms and Conditions Commercial Products and Commercial Services (NOV 2023) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Products and Commercial Services (JAN 2025) FAR 52.225-2 Buy American Certificate (OCT 2022) VAAR 819.7004 Limitations on Subcontracting Compliance requirements FAR 52.225-2 Buy America Certificate Buy American Certificate (Oct 2022) (a) (1) The Offeror certifies that each end product, except those listed in paragraph (b) of this provision, is a domestic end product and that each domestic end product listed in paragraph (c) of this provision contains a critical component. (2) The Offeror shall list as foreign end products those end products manufactured in the United States that do not qualify as domestic end products. For those foreign end products that do not consist wholly or predominantly of iron or steel or a combination of both, the Offeror shall also indicate whether these foreign end products exceed 55 percent domestic content, except for those that are COTS items. If the percentage of the domestic content is unknown, select no . (3) The Offeror shall separately list the line item numbers of domestic end products that contain a critical component (see FAR 25.105). (4) The terms commercially available off-the-shelf (COTS) item, critical component, "domestic end product," "end product," and "foreign end product" are defined in the clause of this solicitation entitled "Buy American-Supplies." (b) Foreign End Products: Line Item No. Description Country of Origin Exceeds 55% domestic content (Yes/No) b) [List as necessary] (c) Domestic end products containing a critical component: Line Item No. ___ [List as necessary] (d) The Government will evaluate offers in accordance with the policies and procedures of part 25 of the Federal Acquisition Regulation. Signature: ________________________ Date: ____________________________ (end of provision) VAAR 852.219-76 VA Notice of Limitations on Subcontracting Certificate of Compliance for Supplies and Products. (a) Pursuant to 38 U.S.C. 8127(l)(2), the offeror certifies that (1) If awarded a contract (see FAR 2.101 definition), it will comply with the limitations on subcontracting requirement as provided in the solicitation and the resultant contract, as follows: [Offeror check the appropriate box] (i) [ ] In the case of a contract for supplies or products (other than from a non-manufacturer of such supplies), it will not pay more than 50% of the amount paid by the government to it to firms that are not certified SDVOSBs listed in the SBA certification database as set forth in 852.219-73 or certified VOSBs listed in the SBA certification database as set forth in 852.219-74. Any work that a similarly situated certified SDBOSB/VOSB subcontractor further subcontracts will count towards the 50% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. (ii) [ ] In the case of a contract for supplies from a nonmanufacturer, it will supply the product of a domestic small business manufacturer or processor, unless a waiver as described in 13 CFR 121.406(b)(5) is granted. The offeror understands that, as provided in 13 CFR 121.406(b)(7), such a waiver has no effect on requirements external to the Small Business Act, such as the Buy American Act or the Trade Agreements Act. (2) Manufacturer or nonmanufacturer representation and certification. [Offeror fill-in check each applicable box below. The offeror must select the applicable provision below, identifying itself as either a manufacturer or nonmanufacturer]: (i) [ ] Manufacturer or producer. The offeror certifies that it is the manufacturer or producer of the end item being procured, and the end item is manufactured or produced in the United States, in accordance with paragraph (a)(1)(i). (ii) [ ] Nonmanufacturer. The offeror certifies that it qualifies as a nonmanufacturer in accordance with the requirements of 13 CFR 121.406(b) and paragraph (a)(1)(ii). The offeror further certifies it meets each element below as required in order to qualify as a nonmanufacturer. [Offeror fill-in check each box below.] [ ] The offeror certifies that it does not exceed 500 employees (or 150 employees for the Information Technology Value Added Reseller exception to NAICS code 541519, which is found at 13 CFR 121.201, footnote 18). [ ] The offeror certifies that it is primarily engaged in the retail or wholesale trade and normally sells the type of item being supplied. [ ] The offeror certifies that it will take ownership or possession of the item(s) with its personnel, equipment, or facilities in a manner consistent with industry practice. (iii) [ ] The offeror certifies that it will supply the end item of a small business manufacturer, processor, or producer made in the United States, unless a waiver as provided in 13 CFR 121.406(b)(5) has been issued by SBA. (3) The offeror acknowledges that this certification concerns a matter within the jurisdiction of an Agency of the United States. The offeror further acknowledges that this certification is subject to Title 18, United States Code, Section 1001, and, as such, a false, fictitious, or fraudulent certification may render the offeror subject to criminal, civil, or administrative penalties, including prosecution. (4) If VA determines that an SDVOSB/VOSB awarded a contract pursuant to 38 U.S.C. 8127 did not act in good faith, such SDVOSB/VOSB shall be subject to any or all of the following: (i) Referral to the VA Suspension and Debarment Committee. (ii) A fine under section 16(g)(1) of the Small Business Act (15 U.S.C. 645(g)(1)); and (iii) Prosecution for violating 18 U.S.C. 1001. (b) The offeror represents and understands that by submission of its offer and award of a contract it may be required to provide copies of documents or records to VA that VA may review to determine whether the offeror complied with the limitations on subcontracting requirement specified in the contract or to determine whether the offeror qualifies as a manufacturer or nonmanufacturer in compliance with the limitations on subcontracting requirement. Contracting officers may, at their discretion, require the contractor to demonstrate its compliance with the limitations on subcontracting at any time during performance and upon completion of a contract if the information regarding such compliance is not already available to the contracting officer. Evidence of compliance includes, but is not limited to, invoices, copies of subcontracts, or a list of the value of tasks performed. (c) The offeror further agrees to cooperate fully and make available any documents or records as may be required to enable VA to determine compliance. The offeror understands that failure to provide documents as requested by VA may result in remedial action as the Government deems appropriate. (d) Offeror completed certification/fill-in required. The formal certification must be completed, signed and returned with the offeror s bid, quotation, or proposal. The Government will not consider offers for award from offerors that do not provide the certification, and all such responses will be deemed ineligible for evaluation and award. Certification: I hereby certify that if awarded the contract, [insert name of offeror] will comply with the limitations on subcontracting specified in this clause and in the resultant contract. I further certify that I am authorized to execute this certification on behalf of [insert name of offeror]. Printed Name of Signee:________________________________________ Printed Title of Signee:_________________________________________ Signature:___________________________________________________ Date:_____________________ Company Name and Address:__________________________________ (End of clause) All quoters shall submit the following: One (1) Quote/proposal in PDF format One (1) Buy America Certificate fully completed and signed One (1) Fully completed and signed Limitations on Subcontracting Certificate document All quotes shall be sent to the Contracting Officer at: Jonatan.Rondon@va.gov Award will be based upon a comparative evaluation of quotes in accordance with the Simplified Acquisition Procedures of FAR 13. Comparative evaluation is the side by side pairwise comparison of quotes based on factors resulting in a Contracting Officer decision for the quote most favorable to the Government. The following are the decision factors: Technical capability factor meeting or exceeding the requirement, Past performance, and Price. The award will be made to the response most advantageous to the Government. Responses should contain your best terms, conditions. 52.212-1 Instructions to Offerors Commercial Products and Commercial Services (SEP 2023) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code(s) and small business size standard(s) for this acquisition appear elsewhere in the Request for Quote (RFQ). However, the small business size standard for a concern that submits a quote, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition Is set aside for small business and has a value above the simplified acquisition threshold. Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value. (b) Submission of Quotes. Submit signed and dated quotes to the office specified in this Request for Quote (RFQ) at or before the exact time specified in this solicitation. Quotes may be submitted on letterhead stationery, or as otherwise specified in the solicitation. As a minimum, quotes must show (1) The solicitation number. (2) The time specified in the solicitation for receipt of quotations. (3) The name, address, and telephone number of the quoter. (4) A technical description of the items being quoted in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary. (5) Terms of any express warranty. (6) Price and any discount terms. (7) "Remit to" address, if different than mailing address. (8) A completed copy of the representations and certifications at Federal Acquisition Regulation (FAR) 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Quotation Amendments. (10) Past performance information will not be considered in simplified acquisition procurements. (11) Quotes should include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Quotes that fail to furnish required representations, or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of Quotes. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of quotes, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of quotes. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender s request and expense, unless they are destroyed during pre-award testing. (e) Multiple Quotes. Quoters are encouraged to submit multiple quotes presenting alternative terms and conditions, including alternative line items (provided that the alternative line items are consistent with FAR subpart 4.10), or alternative commercial products or commercial services for satisfying the requirements of this solicitation. Each quote submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of quotes. (1) Quoters are responsible for submitting quotes, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that quotes or revisions are due. (2) Any quote received at the Government office designated in the solicitation after the exact time specified for receipt of quotes is "late" and may not be considered unless it is received before purchase order issuance and the Contracting Officer determines that accepting the late quote would not unduly delay the acquisition. (3) If an emergency or unanticipated event interrupts normal Government processes so that quotes cannot be received at the Government office designated for receipt of quotes by the exact time specified in the Request for Quote, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of quotes will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (g) Issuance of Purchase Order. The Government may issue a purchase order to one or more quoters as identified in the Request for Quote (RFQ). Therefore, the quoter s initial quote should contain the best terms from a price and technical standpoint. However, the Government may reject any or all quotes if such action is in the public s best interest. In addition, the Contracting Officer (CO) may issue a purchase order to other than the quoter with the lowest quoted price. (h) Multiple awards. The Government may accept issue a purchase order for any item or group of items of a quotation, unless the quoter qualifies the quotation by specific limitations. Unless otherwise provided in the quotation, offers may not be submitted for quantities less than those specified in the RFQ. The Government reserves the right to issue a purchase order for a quantity less than the quantity quoted, at the unit prices quoted, unless the quoter specifies otherwise in the quote. (i) Availability of requirements documents cited in the solicitation. (1) (i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101 29, and copies of Federal specifications, standards, and product descriptions can be downloaded from the ASSIST website at https://assist.dla.mil. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained from the address in paragraph (i)(1)(i) of this provision. (2) Most unclassified Defense specifications and standards may be downloaded from the ASSIST website at https://assist.dla.mil. (3) Defense documents not available from the ASSIST website may be requested from the Defense Standardization Program Office by (i) Using the ASSIST feedback module ( https://assist.dla.mil/feedback) or (ii) Contacting the Defense Standardization Program Office by telephone at 571 767 6688 or email at assisthelp@dla.mil. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Unique entity identifier. (Applies to all quotes that exceed the micro-purchase threshold, and quotes at or below the micro-purchase threshold if the Request for Quote (RFQ) requires the Contractor to be registered in the System for Award Management (SAM).) The quoter shall enter, in the block with its name and address on the cover page of its offer, the annotation "Unique Entity Identifier" followed by the unique entity identifier that identifies the Quoter's name and address. The Quoter also shall enter its Electronic Funds Transfer (EFT) indicator, if applicable. The EFT indicator is a four-character suffix to the unique entity identifier. The suffix is assigned at the discretion of the Quoter to establish additional SAM records for identifying alternative EFT accounts (see FAR subpart 32.11) for the same entity. If the Quoter does not have a unique entity identifier, it should contact the entity designated at www.sam.gov for unique entity identifier establishment directly to obtain one. The Quoter should indicate that it is a planning to submit a quote for a Government Request for Quote (RFQ) when contacting the entity designated at www.sam.gov for establishing the unique entity identifier. (k) [Reserved] (l) Notification. The CO will not notify unsuccessful quoters that responded to this Request for Quotation (RFQ). (End of provision) To facilitate the award process, all quotes must include a statement regarding the terms and conditions herein as follows: "The terms and conditions in the solicitation are acceptable to be included in the award document without modification, deletion, or addition." OR "The terms and conditions in the solicitation are acceptable to be included in the award document with the exception, deletion, or addition of the following:" Quoters shall list exception(s) and rationale for the exception(s), if any. Submission of your response shall be received not later than Wednesday, June 13th, 2025, 1600 EST at Jonatan.rondon@va.gov. Late submissions shall be treated in accordance with the solicitation provision at FAR 52.212-1(f). Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact: Jonatan Rondon Jonatan.rondon@va.gov Network Contracting Office 2 VA New York Harbor Healthcare System Margaret Cochran Corbin VA Medical Center 423 East 23rd Street New York, NY 10010 212-686-7500 ex. 16490
Data sourced from SAM.gov.
View Official Posting »