Inactive

Statement of Work CONMED Electrosurgical Unit Manchester VA Medical Center PURPOSE The purpose of this ESU is to allow the Gastroenterologist the ability to perform hemostasis during GI procedures, to... Statement of Work CONMED Electrosurgical Unit Manchester VA Medical Center PURPOSE The purpose of this ESU is to allow the Gastroenterologist the ability to perform hemostasis during GI procedures, to include intestinal and esophageal biopsies, resulting in bleeding using Argon gas. SCOPE OF WORK The Contractor shall provide, transport, installation, and test all listed equipment. All products must meet all salient characteristics defined in this section All equipment and installation must meet manufacturers and VA specifications The contractor shall furnish all supplies, equipment, facilities and services required for delivery and installation of this equipment. The contractor is responsible for any missing parts and components not included in the order to carry out the installation. Training of staff in operations is not required as current system is in place and being utilized by staff. EQUIPMENT TO BE PROCURED: Model No. Description Qty. CE200 BEAMER MATE ESU 1 CB200 BEAMER PLUS ARGON 1 CC200 BEAMER CART 1 CB200-A02 PRESSURE REDUCER (2001599) 1 CB200-A01 BEAMER CONNECTING CABLE FOR ARGON 1 CE200-A05 DOUBLE FOOTSWITCH (PLASTIC MOLDED) 1 136050 ARGON GAS CYLINDER, FULL 1 SN-UAC UNIVERSALE MONOPOLAR ACTIVE CORD 1 AREAS TO BE SERVICED Department of Veterans Affairs Manchester VA Medical Center Surgical Services, Operating Room 718 Smyth Rd, Manchester, NH 03104 INSTALLATION Contractor shall deliver all equipment to the Manchester New Hampshire Veteran Medical Center, 718 Smyth Rd, Manchester, NH 03104. Deliver materials to the site in manufacturer's original sealed containers with brand name marked thereon. Package items to prevent damage or deterioration during shipment, handling, storage and installation. Maintain protective covering in place and in good repair until removal is necessary. Store products in dry condition inside enclosed facilities. TRAINING Training is requested from the contractor for introduction to new programming options. INSPECTION AND ACCEPTANCE The Contractor shall conduct a joint inspection with the COR upon delivery of equipment. Contractor shall provide dates of completion of punch list items and replacement parts and/or short ship items from the manufacturer(s). The COR shall ensure all work is completed satisfactorily prior to acceptance. Disputes shall be resolved by the Contracting Officer. WARRANTY The contractor warrants that the equipment is free from defects in materials and workmanship for the specified warranty period set forth in the Contractors operator s manual. TASK FREQUENCY AND INSTRUCTIONS The work set forth in the Scope of Work shall be completed in a single visit, be it a single day or multiple days as required for appropriate completion. SPECIAL WORK REQUIREMENTS The Contractor must comply with security, privacy, and safety issues in accordance to VA standards, policies, and directives set forth at all times while providing the work outlined in the Scope of Work.