Inactive

The Federal Aviation Administration contemplates issuing a Screening Information Request (SIR) for a Fire Alarm System Replacement at the FRP Air Traffic Control Tower (ATCT) in Fort Pierce, FL. The s... The Federal Aviation Administration contemplates issuing a Screening Information Request (SIR) for a Fire Alarm System Replacement at the FRP Air Traffic Control Tower (ATCT) in Fort Pierce, FL. The scope of work includes, but is not limited to, the following: Furnishing and installing all labor, materials, supplies, and equipment necessary as described in this specification and design documents. The contractor shall provide and secure all labor, material, equipment, tools, transportation, and supplies required to complete the work in accordance with the plans, specifications, and terms of the contract. 1. Installing a new fire alarm system side-by-side to the existing Simplex 4100U fire alarm system. The existing system shall remain fully operational until the new system is installed, inspected, tested, commissioned and accepted. 2. Connecting and interfacing the new fire alarm system to the existing emergency control function interface device circuits, once the cutover plan is approved. 3. Removing and replacing the existing transient voltage surge suppression. Devices (TVSS) and installing new TVSS’s on fire alarm system equipment and circuits in accordance with FAA requirements. 4. Conducting a 100% acceptance test in accordance with NFPA 72, National Fire Alarm and Signaling Code by functionally testing / operating every initiating device, notification appliance and emergency control function interface device for proper operation and annunciation. 5. Removing and demolishing off-site the existing fire alarm system equipment, conduit and wiring that is not reused. 6. Permanently securing smoke damper louvers in the open position for the two fire/smoke dampers installed as part of the stair pressurization system shaft located on the Intermediate Level 1 of the ATCT. 7. Firestopping all new penetrations made to accommodate new or removed conduits, wireways or other equipment, so that the rating of the enclosure is maintained. 8. Painting and patching in accordance with the Contract Documents to the satisfaction of the FAA. This is not a Request for Proposal (RFP) and proposals are not being accepted from this public announcement. At this time, the nature of the competition has not been determined. The FAA may decide to do a Full and Open competition or a Set-Aside for small businesses or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBA's 8(a) program. The purpose of this pre-solicitation is to solicit statements of interest and capabilities from small business, service-disabled veteran-owned small businesses, 8(a) certified firms, and all other business types and sizes capable of providing the type of work described in this notice. In order to assist with acquisition strategy development and to gain a better understanding of the commercial marketplace, the FAA requests the following information from interested vendors: A. Name of Company (the resultant Prime contractor that may ultimately be awarded the subsequent contract). B. Address C. Point of Contact name, e-mail address and telephone number D. DUNS Number E. Bonding Capability F. Relevant experience on projects of similar scope within the last five years. Provide specific contract numbers, contact names, and email information to support claimed capabilities. G. Number of years in Business Failure to respond to the Pre-solicitation may preclude a contractor's ability to receive a copy of the future solicitation. Limit complete responses to no more than 5 pages. Information provided will not be released; however, mark PROPRIETARY on all documents submitted as necessary. Please submit your capability statement to Erin Crabtree at erin.m.crabtree@faa.gov by February 16, 2022 at 1500 CT.