Inactive

Procurement for Network Pulse Forming for the Federal Aviation Administration (FAA) The Federal Aviation Administration (FAA) requires ten (10) Network Pulse Forming, Part number 93398 or 1D20472H02. ... Procurement for Network Pulse Forming for the Federal Aviation Administration (FAA) The Federal Aviation Administration (FAA) requires ten (10) Network Pulse Forming, Part number 93398 or 1D20472H02. Drawing is attached below. The purpose of this market survey is to solicit statements of interest and capabilities from interested vendors in accordance with FAA Acquisition Management System (AMS) Policy 3.2.1.2.1. This information will be used by the FAA in choosing the method and type of procurement competition to be used to fulfill this requirement. The FAA requires copies of certification letters for interested service-disabled veteran-owned small businesses (SDVOSB) or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBA’s 8(a) Program. Responses to this market survey will be used for informational purposes only. North American Industry Classification System (NAICS) code 334416 Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing, size standard 550 employees, applies to this requirement. The nature of the competition and procurement method that will be conducted for this requirement has not yet been determined. The FAA will review the responses to this Market Survey and will make acquisition planning decisions based on market survey responses and the FAA’s needs. The FAA may decide to conduct a full-and-open competition or set aside all or part of the procurement for small businesses, service-disabled veteran-owned small businesses, or eligible socially and economically disadvantaged businesses that are certified by the SBA for participation in the SBA’s 8(a) Program. In order to make this determination the FAA requires the following information from interested vendors in accordance with the attached documents herein: General Capability Statement - This document is limited to not more than six (6) pages, in Times New Roman, size 12 pt. font, and must identify: Type of services provided by your firm; Size and type of services provided by previous contracts (elaborate and provide detailed information and past performance); Number of years in business. Response shall also provide a point of contact number and name (either by phone, email or both) for questions. *Proof of Entity Registration in the System for Award Management (https://SAM.gov) A copy of the vendor's SBA 8(a) Certification Letter, if applicable or Certification of SDVOSB eligibility, if applicable. *Per the FAA Acquisition Management System (AMS), clause 3.3.1-33 System for Award Management (SAM), paragraph (b)(1) “By submission of an offer, the offeror acknowledges the requirement that a prospective awardee must be registered in the SAM database prior to award, during performance, and through final payment of any contract, basic agreement, basic ordering agreement, or blanket purchasing agreement resulting from this solicitation.” This is not a screening information request or request for proposal of any kind. The FAA is not seeking or accepting proposals at this time. The responses will be used to develop the source list for this requirement. The FAA will not pay for any information received or costs incurred in preparing the response to the market survey. Therefore, any cost associated with the market survey submission is solely at the interested vendor’s expense. All responses to this market survey must be received by Friday, December 1, 2023, 2:00 CT. Please include “MARKET SURVEY RESPONSE: “Network Pulse Forming” in the subject line of your email. Information provided will not be released but please mark PROPRIETARY on all documents submitted, as necessary. NO PHONE CALLS PLEASE. ALL QUESTIONS MUST BE IN WRITING VIA EMAIL TO THE CONTRACT SPECIALIST. CONTACT INFORMATION IS PROVIDED BELOW. All submittals should be submitted in electronic format (email) to: Haylee Hildebrand, Contract Specialist Haylee.p.hildebrand@faa.gov

Inactive

The Federal Aviation Administration (FAA) is planning the acquisition of thermal flight enroute strips, NSN 7530-01-682-6716 full terminal strips, NSN 7530-01-682-7609 half terminal strips and NSN 753... The Federal Aviation Administration (FAA) is planning the acquisition of thermal flight enroute strips, NSN 7530-01-682-6716 full terminal strips, NSN 7530-01-682-7609 half terminal strips and NSN 7530-01-682-6811 ARTCC Enroute strips, for air traffic control operations. These flight strips are an essential tool in tracking aircraft. This flight strip is applicable to the Flight Data Input/Output system (FDIO). The flight strips are to be manufactured in accordance with (draft) FAA Specification FAAD-F-1369-3, dated September 21, 2023 and applicable drawings, see attached. Estimated annual quantity for the base year and all option years are as follows: NSN 7530-01-682-6716 8100 boxes per year NSN 7530-01-682-6809 1300 boxes per year NSN 7530-01-682-6811 300 boxes per year. The FAA contemplates the use of an Indefinite-Delivery/Indefinite-Quantity type contract with fixed unit prices, with a base year and four one (1) year option periods, for the acquisition of these thermal flight strips. The North American Industry Classification System (NAICS) code is 323111 Commercial Printing (except Screen and Books). The business size standard for this NAICS is 650 employees. CAPABILITY STATEMENT: All vendors responding to this market survey must provide a Capability Statement that addresses the following (in order): a. Type of products/services provided by your firm, may include specification sheets and brochures. b. Description of previous contracts for products that are similar in scope. Provide detailed information and past performance information for at least three (3) previous contracts including program title, customer name, contract dates, contract value, customer point of contact, and description of work performed. c. Demonstrate experience/capability for the requirements set forth in the attached FAA Specification FAAD-F-1369-3. The FAA has adopted a two-phase approach in accommodating this acquisition. The first phase (identified as SIR1) will involve offeror submission of non-converted material, thermal flight strips (bid samples) and technical documentation for testing and evaluation by the FAA against established specifications and standards. Only those offerors submitting non-converted material, bid samples and required technical documentation that are found to conform to FAA’s specifications and standards will be permitted to participate in the second phase of the acquisition process. The second phase (identified as SIR2) will involve the issuance of a Screening Information Request (SIR2) with submission of price proposals based on each successful offeror’s submission under the first phase. All flight strips samples will be processed through Lemur-FSP NSN thermal printers NSN 7025-01-616-8790 at the FAA Logistics Center in Oklahoma City, Oklahoma by the Technical Programs Support Team, AJW-L800. All interested sources must submit responses in writing to connie.m.houpt@faa.gov by 2:00 p.m. CT, October 5, 2023 and reference 6973GH-24-MS-00001 Thermal Flight Strips. The FAA will not pay for any information received or costs incurred in preparing responses to this market survey. Any proprietary information should be so marked. This announcement shall not be construed as a request for proposal or as an obligation on the part of the FAA to acquire these flight strips. Responders to this announcement may be asked to provide additional details/information based on their initial submittal. The final determination by the FAA not to open this requirement to competition, based on any information provided, is solely within the discretion of the FAA. "This Notice is for informational purposes for Minority, Women-Owned and Disadvantaged Business Enterprises: The Department of Transportation (DOT), Office of Small and Disadvantaged Business Utilization, has a program to assist small businesses, small businesses owned and controlled by a socially and economically disadvantaged individuals, and women- owned concerns to acquire short- term working capital assistance for transportation-related contracts. Loans are available under the DOT Short Term Lending Program (STLP) at prime interest rates to provide accounts receivable financing. The maximum line of credit is $750,000. For further information and applicable forms concerning the STLP, call the OSDBU at (800) 532-1169."