Inactive

1. Introduction/Purpose This is a market survey capability assessment for the required labor, facilities, equipment, tools, test equipment, packing, preservation and packaging, parts, software, and an... 1. Introduction/Purpose This is a market survey capability assessment for the required labor, facilities, equipment, tools, test equipment, packing, preservation and packaging, parts, software, and any other technical or administrative support necessary to provide the required Contractor Depot Level Support (CDLS) for the Low Power Distance Measure Equipment (LPDME 415SE). The LPDME 415SE is a component of instrument landing capability for precision and non-precision approaches that measure the distance from the aircraft to the runway. It general has a range of 40 miles from the airport and aids not only in the approach but also in allowing pilots to remain position oriented around the airport. This orientation is especially valuable in high terrain location and helps airplanes to avoid obstacles or restricted areas. The LPDME equipment in aircraft sends a pulse signal to the ground base. LPDME, which responds with an answer pulse signal. Support is required for all sites and configurations utilizing the LPDME 415SE and includes contractor depot logistics support, integrated logistics support, configuration management, exchange and repair (E&R) and return and repair (R&R) of line replaceable units (LRUs), fabrication and or procurement of LRUs, repair procedures, engineering change proposals and technical assistance/engineering services for the MMAC Oklahoma City, OK. The National Stock Numbers (NSNs) associated with this work are listed below. 1 5821-01-514-4595 TRANSMITTER, RADIO 474910016-01 2 5895-01-514-4469 DUPLEXER 474910014-01 3 5895-01-514-4487 RECEIVER-TRANSMITTE 474910012-01 4 5895-01-514-4529 PARTS KIT, ELECTRONI 069459-1001 5 5930-01-514-4476 SWITCH, TOGGLE 011C00-0017 6 5930-01-514-4509 SWITCH, TOGGLE 011C00-0016 7 5945-01-514-4459 RELAY, ELECTROMAGNET 011C50-0012 8 5945-01-514-4480 RELAY, SOLID STATE 011C70-0002 9 5945-01-514-6675 RELAY, ELECTROMAGNET 011C50-0013 10 5975-01-514-4465 CABINET, ELECTRICAL 283150-0001 11 5980-01-514-4463 COUPLER, OPTOELECTRO 046C05-0002 12 5985-01-514-4471 DUMMY LOAD, ELECTRIC 051C00-0008 13 5985-01-514-4481 COVER, ANTENNA 500300-100 14 5985-01-514-4482 ANTENNA ASSEMBLY 047C50-0008 15 5985-01-514-4599 ACCESSORY KIT, ANTEN 069459-0001 16 5998-01-514-4467 CIRCUIT CARD ASSEMB 120566-0001 17 5998-01-514-4470 BACKPLANE ASSEMBLY 487910002 18 5998-01-514-4590 CIRCUIT CARD ASSEMB 483700015-01 19 5998-01-514-4592 CIRCUIT CARD ASSEMB 483700014-01 20 5998-01-514-5048 CIRCUIT CARD ASSEMB 474910013-01 21 5998-01-514-5102 CIRCUIT CARD ASSEMB 407000008-01 22 6130-01-514-4461 POWER SUPPLY 049C00-0032 23 6130-01-514-4542 POWER SUPPLY ASSEMB 488700021 25 NSL RSM, UNIT ILS/DME 098724-0001 26 100014778, DME/ILS remote monitor, 098731-0001 -- 2. Nature of Competition The purpose of this market survey is to solicit statements of interest and capabilities from small businesses, service-disabled veteran-owned small businesses, and 8(a) certified firms, capable of providing this requirement, per the attached draft Statement of Work (SOW). This market survey is also being conducted in order to obtain the information necessary to determine whether adequate competition exists to set-aside the competition among small businesses, service-disabled veteran-owned small businesses or 8(a) certified firms. In order to make this determination the FAA requires the following from interested vendors: Capability Statement - This document should identify: • Type of services provided by your firm, • Size and type of services provided by previous contracts (elaborate and provide detailed information and past performance), • Number of years in business 3. Standard Language (a) This is not a Screening Information Request or Request for Proposals of any kind; (b) The FAA is not seeking or accepting unsolicited proposals; (c) The FAA will not pay for any information received or costs incurred in preparing the response to the market survey; and (d) Any costs associated with the market survey submittal is solely at the interested vendor’s expense 4. North American Industry Classification System (NAICS) Code NAICS Code is 335931 - Current-Carrying Wiring Device Manufacturing with a size standard of 500 employees. 5. Submittal Requirements for Market Survey Please respond by reviewing the Statement of Work attachment. Responses shall not exceed 15 pages, in Times New Roman, size 12 pt. font. Response shall also provide a point of contact number and name (either by phone, email or both) for questions. All responses to this market survey must include Market Survey Name and number in the subject line and be received by Monday, March 5, 2021, 4:00 CST. All submittals should be submitted by email to: ATTN: Joel Scott Email: joel.e.scott @faa.gov 6. Attachments (a) Draft Statement of Work/Specification