Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:140R6024Q0078
The Bureau of Reclamation, Missouri Basin Region, intends to issue a Commercial Request for Quote (RFQ) for the following Brand Name or Equal supplies: Specifications of Pack 1. Multi-Process Welder A...
The Bureau of Reclamation, Missouri Basin Region, intends to issue a Commercial Request for Quote (RFQ) for the following Brand Name or Equal supplies: Specifications of Pack 1. Multi-Process Welder A. Basic Specifications: i. Input voltage: 460, 380/400/415, 575 ii. Input Current a. 39/31/31 b. 33/27/27 iii. Input Phase: 3 iv. Output Range: 5-500A v. Rated Output a. 500A/40V/60% b. 450A/38V/100% vi. Net Weight: <150 lbs. B. Processes i. Stick (SMAW) ii. Gouging (CAC-A) iii. Flux-Cored (FCAW) iv. TIG (GTAW) v. Pulsed MIG (GMAW-P) vi. Flux-Cored Self-Shielded (FCAW-S) vii. Flux-Cored Gas-Shielded (FCAW-G) C. Max Rating: 500A D. Output Range by Mode: 5 – 500A E. Communication Technology i. Analog ii. Digital iii. CrossLinc iv. ArcLink F. Amphenol Pins i. 5 ii. 14 iii. 12 G. Work Lead Connector Type: Lug 2. Drive Roll Kit 3/64 in. (1.2 mm) Aluminum Wire 3. Drive Roll Kit 1/16 in. (1.6 mm) Aluminum Wire 4. Work Lead A. Work Lead Package B. 15 ft 4/0 cable with lugged ends C. Ground Clamp 5. Power Feed A. Push-Pull Functionality B. Internal Lighting C. Internal Heating D. Dual Procedure and Memory Button(s) E. Compact Case Design 6. Fixed Conduit Gun: Push-Pull 7. Weld Power Cable A. lug to lug B. 3/0, 600A C. 60% duty cycle D. 10 ft 8. Pressure Compensated Flowmeter Regulator A. Brass Body with neoprene diaphragm B. Pressure compensated to 20 psig. C. Flow-control up to 140 SCFH D. Dual calibration onflow tube E. Vertical mount Required Performance Specifications 1. Delivery upon manufacturing completion- three (3) complete and operational Portable Aluminum MIG Welder packs to the WYAO. 2. Deliver all certifications of acceptance that states Inspection Certifications and Testing are completed and passed per Manufacturer’s specifications. • Manufacturer’s specifications must meet all applicable OSHA and NFPA regulations. The delivery location is: Bureau of Reclamation, located at 205 Chamberlain Road, Mills WY, 82644. FOB Destination of all supplies with an anticipated delivery date of November 1, 2024. It is anticipated the simplified acquisition set aside will be a Total Small Business. It is intended the Request for Quote (RFQ) will be posted on or about 14 June 2024 via the SAM.gov website. It is incumbent upon contractors to monitor the SAM.gov web page for RFQ release and all subsequent amendments. The product service code is 3431 and the NAICS code is 333992. HARD COPIES OF THE SOLICITATION WILL NOT BE ISSUED. Quotations are not requested and will not be accepted from this Pre-Solicitation Notice. It is required all companies are to be actively registered in SAM.gov prior to submitting a quotation for this solicitation. For further information or questions regarding this solicitation, please contact Chris Zook by e-mail at czook@usbr.gov.
