Inactive

Glen Elder Dam Outlet Works Recoating, Kansas. The work to be performed includes the following: Furnish and install permanent Jersey barriers and attenuators on the dam crest at the river outlet works... Glen Elder Dam Outlet Works Recoating, Kansas. The work to be performed includes the following: Furnish and install permanent Jersey barriers and attenuators on the dam crest at the river outlet works (ROW) gate shaft turnout; remove the ladders, handrails, and specified platforms within the ROW gate chamber and shaft, and replace them with fiberglass-reinforced plastic (FRP); remove and replace the two 6-inch-diameter drain valves along the ROW pipe; add a hinge to the manhole cover located at the downstream end of the ROW access tunnel; clean and fully recoat the exterior of all metalwork within the ROW gate chamber and shaft, including the shaft cover and excluding items to be replaced with FRP; clean and fully recoat the exposed exterior of the ROW pipe within the access tunnel, as well as all appurtenant manholes, couplings, and support structures; remove the asbestos paper wrapping from the exposed exterior of the municipal waterline within the access tunnel; clean and fully recoat the waterline and all appurtenant valves and fittings; clean and recoat the interior of the ROW pipe as follows: fully recoat between the outlet gate and the end of the transition immediately downstream; fully recoat around the five coupled joints; fully recoat the lateral and wye branch at the downstream end; perform spot repairs on the remaining interior surfaces (amounting to approximately 2 percent of the total surface). Glen Elder Dam is located on the Solomon River in north-central Kansas, southwest of the town of Glen Elder, in Mitchell County The solicitation will be issued on or around July 15, 2019. The organized site visit will take place approximately 15 days from the date the solicitation is issued. Proposals will be due approximately 30 days from the date the solicitation is issued. All responsible contractors may submit a proposal which shall be considered by the Bureau of Reclamation. The estimated price range of this acquisition is $1.0 to $5.0 Million. The North American Industrial Classification Code is 238320. The small business size standard is $15.0 Million. The procurement will be issued for full and open competition under a Federal Acquisition Regulations Part 15. Award will be made to the offeror submitting a proposal which conforms to the solicitation and is most advantageous to the Government considering the non-cost and cost factors being evaluated. The technical factors to be evaluated are as follows: (1) Technical Plan for Construction, including Work Plan, Schedule and Procedure for coating removal, surface preparation and waste management; (2) Company Experience, (3) Past Performance, and (4) Safety. Once issued, the solicitation (including specifications and drawings) will be posted at www.fbo.gov and www.fedconnect.net (from the fedconnect site, click on Public Opportunities Only, search by reference number, then enter 140R6019R0021. Effective July 29, 2012, any contractor interested in doing business with the Federal Government must register in the System For Award Management (SAM) database prior to award of a contract. SAM is a Federal Government owned and operated free website that consolidates the Central Contractor Registration (CCR), Online Representations and Certifications Application (ORCA), and the Excluded Parties List System (EPLS). The vendor's Duns and Bradstreet number and banking information are required for registration. Contractors may obtain information on registration and annual confirmation requirements at the SAM website at www.SAM.GOV or by calling 1-866-606-8220. Payment requests for the anticipated contract must be submitted electronically through the U.S. Department of the Treasury's Invoicing Processing Platform (IPP) system. The IPP website is https://www.ipp.gov. The contractor must use the IPP website to register access and use IPP for submitting requests for payment. Contractor assistance with enrollment can be obtained by contacting the IPP production helpdesk via e-mail ippgroup@bos.frb.org or phone (866) 973-3131. If the contractor is unable to comply with the requirement to use IPP for submitting invoices for payment, the contractor must submit a waiver request in writing to the Contracting Officer with its proposal or bid.