Inactive Total Small Business Set-Aside (FAR 19.5)

The purpose of this amendment is to incorporate additionally submitted questions and answers submitted after second site visit.

Inactive

The purpose of this Amendment is to update the principal components of the required work, specifically item 5 dealing with the trash rake. PRINCIPAL COMPONENTS OF WORK: 1. Concrete preparation and rep... The purpose of this Amendment is to update the principal components of the required work, specifically item 5 dealing with the trash rake. PRINCIPAL COMPONENTS OF WORK: 1. Concrete preparation and repair, blast and spot repair supply pipe. 2. Blast and recoat interior and exterior drum gate, and gate stands. 3. Blast and recoat all associated metal work for all seal assemblies and plates. 4. Removal and disposal of coatings and equipment containing hazardous material. 5. Refurbish seals, replace trash rake and rehabilitate drum gate. 6. Provide drum gate galvanic anode cathodic protection system. 7. Provide rivet replacement. Any questions concerning this solicitation should be directed to Robert Downing via email at rdowning@usbr.gov.

Inactive

This announcement is to small business, 8(a) Small Business, HUBZone Small Business, Woman-Owned Small Business and Service-Disabled Veteran-Owned Small Business concerns that may be interested in per... This announcement is to small business, 8(a) Small Business, HUBZone Small Business, Woman-Owned Small Business and Service-Disabled Veteran-Owned Small Business concerns that may be interested in performing a contract for the California Great Basin Region of the Bureau of Reclamation. The work to be performed is described below. Based upon response to this announcement, the Government may determine to set this acquisition aside or proceed with an unrestricted solicitation. The applicable North American Industry Classification System (NAICS) Code is 237990 and the related small business size standard is $39.5M. This procurement will require 100% performance and payment bonds. This notice is not a request for proposal and the information presented in this announcement will not obligate the Bureau of Reclamation in any manner. The estimated cost of this project is between $1,000,000.00 and $5,000,000.00. The work is located at Friant Dam located approximately 15 miles northeast of Fresno, California, 93626, in Fresno County, near the town of Friant, on the San Joaquin River. Interested parties should include the following information in their response: (a) Business name, address, cage code, size classification based on NAICS size standard, socioeconomic classification (i.e. HUBZone and/or 8(a)), and a point of contact; (b) A positive statement of your intention to submit an offer for this solicitation as a prime contractor; (c) Evidence of your experience performing work similar in type and scope to the work in this announcement within the last five years. The evidence should include: contract numbers, project titles, dollar amounts and points of contacts with telephone numbers. Please do not include more than three past projects; and (d) Include attachments cataloging the company's equipment assets, personnel resources and financial resources that demonstrate company responsibility and capability to perform required work. (e) If bonding is required, also provide evidence of your bonding capacity; All interested parties are encouraged to respond to this notice, by e-mail to rdowning@usbr.gov not later than 1:00 PM PST on 09/12/2022. The information provided in this announcement is all information the Government has available at this time. There are no specifications, drawings, bid packages, or source lists available. Prospective contractors MUST be actively registered in the System for Award Management (SAM) database at http://www.sam.gov to be eligible for award. PRINCIPAL COMPONENTS OF WORK The objective of this project is to control corrosion and rehabilitate drum gate functionality of the drum gate for Friant Dam for years to come. This will be accomplished as follows: 1. Concrete preparation and repair, blast and spot repair supply pipe. 2. Blast and recoat interior and exterior drum gate, and gate stands. 3. Blast and recoat all associated metal work for all seal assemblies and plates. 4. Removal and disposal of coatings and equipment containing hazardous material. 5. Refurbish seals and rehabilitate drum gate. 6. Provide drum gate galvanic anode cathodic protection system. 7. Provide rivet replacement.