Inactive SBA Certified Women-Owned Small Business (WOSB) Program Set-Aside (FAR 19.15)

Amendment to post to FBO

Inactive

**DUE TO SYSTEM LIMITATIONS, THIS SOURCES SOUGHT IS BEING AMENDED TO INCLUDE THE SOURCES SOUGHT LANGUAGE, RATHER THAN THE REQUEST FOR INFORMATION LANGUAGE THAT SHOULD HAVE BEEN POSTED AS A 'SPECIAL NO... **DUE TO SYSTEM LIMITATIONS, THIS SOURCES SOUGHT IS BEING AMENDED TO INCLUDE THE SOURCES SOUGHT LANGUAGE, RATHER THAN THE REQUEST FOR INFORMATION LANGUAGE THAT SHOULD HAVE BEEN POSTED AS A 'SPECIAL NOTICE'. THIS IS THE SAME SOURCES SOUGHT THAT WAS POSTED ON APRIL 17, 2019 AS A SPECIAL NOTICE.** This Sources Sought notice is for informational and planning purposes only. It does not constitute a Solicitation and is not to be considered as a commitment by the Government. All firms responding to this sources sought notice are advised that their response to this notice is not a request that will be considered for contract award. The information from this market research is for planning purposes only and will assist the Government in planning its acquisition strategy. This is strictly market research and the Government will not entertain questions concerning this market research. Contractor must have knowledge of lead abatement regulations and best practices. The intent of this notice is to determine the availability of contractors that can provide the following: 1.0 Scope The US Bureau of Reclamation (USBR), Grand Coulee Power Office (GCPO), Grand Coulee, WA has a requirement for the removal and proper disposal of lead paint and coal tar from outlet tubes consisting of four (4) cast iron follower gate pieces, four (4) cast steel ring gate pieces, four (4) cast steel assembly consisting of two (2) upper bonnet covers and one (1) bonnet base for each assembly. The follower gate weighs approximately 14,000 lbs., the ring gate weighs approximately 24,000 lbs. each, upper bonnet cover weighs approximately 400 lbs. each and the bonnet base weighs approximately 5,600 lbs. each. The pieces to be sandblasted will be disassembled and prepped for sandblasting with protective covers installed before shipment by government labor. The items will be staged and loaded by government forces directly onto the contractor's transport. The primary purpose is for the Contractor to furnish all labor, transportation, equipment and materials to perform lead paint and coal tar removal from the cast steel/iron parts via sand blasting to clean metal. Contractor shall perform proper abatement and disposal of lead paint and coal tar removed by the sand blasting process. 2.0 Contractor Qualifications A. Maintain a valid State business license and Specialty Contractor's license to perform lead-based paint abatement. B. Uphold all requirements of the Revised Code of Washington (RCW) Chapter 70.103 and OSHA Standard 1926.62. C. Maintain applicable worker training certification(s) as provided through an accredited State lead abatement training program. Potential offerors having the capabilities necessary to meet the needs of the described requirement are invited to provide a capabilities statement via e-mail. The Capability statements must include the following: 1) Company name and Point of Contact information 2) DUNS number 3) Small Business Size/Certification (to include 8(a), HUBZone, SDVOSB, etc.) 4) Provide 3 references that your company has provided similar services within the last three (3) years Responses are due no later than 5:00 PM PT, Tuesday, May 14, 2019, and shall be electronically submitted to Paula Collins at pcollins@usbr.gov. All responses will be used to determine the appropriate acquisition strategy for a potential future acquisition. Response is strictly voluntary; no reimbursement will be made for any costs associated with providing information in response to this synopsis or any follow-up information requests. ******************************************************************** ORIGINAL POSTING: PURPOSE: The Bureau of Reclamation (Reclamation), a water management agency within the Department of the Interior (Interior), announces the availability of a Request for Information (RFI). Reclamation is seeking interest from any entity or entities interested in providing services for Lead Paint and Coal Tar removal and disposal on outlet tube components located at the Grand Coulee Dam, Grand Coulee Washington. An expression of interest is not binding or promissory. In addition, further Requests for Information (RFI) may be issued. Failure to respond does not preclude the ability to respond to any future RFIs. This RFI is not subject to the Federal Acquisition Regulation (FAR). This RFI is issued solely for information and planning purposes; it does not constitute a Request for Proposal (RFP) or any promise to issue an RFP. This RFI does not commit Reclamation to contract for any supply or service. Responders are advised that Reclamation will not pay any costs incurred in response to this RFI. All cost associated with responding to this RFI will be solely at the interested party's expense. BACKGROUND: The US Bureau of Reclamation (USBR), Grand Coulee Power Office (GCPO), Grand Coulee, WA has a requirement for the removal and proper disposal of lead paint and coal tar from two outlet tubes a year consisting of four (4) cast iron follower gate pieces, four (4) cast steel ring gate pieces, four (4) cast steel assembly consisting of two (2) upper bonnet covers and one (1) bonnet base for each assembly. The follower gate weighs approximately 14,000 lbs., the ring gate weighs approximately 24,000 lbs. each, upper bonnet cover weighs approximately 400 lbs. each and the bonnet base weighs approximately 5,600 lbs. each. The pieces to be sandblasted will be disassembled and prepped for sandblasting with protective covers installed before shipment by government labor. The items will be staged and loaded by government forces directly onto the contractor's transport. The primary purpose is for the Contractor to furnish all labor, transportation, equipment and materials to perform lead paint and coal tar removal from the cast steel/iron parts via sand blasting to clean metal. Contractor shall perform proper abatement and disposal of lead paint and coal tar removed by the sand blasting process. DESCRIPTION: Reclamation is inviting industries' comments to the Draft PWS in order to gather the most current and efficient processes used to refurbish Exciter Components and Sub Components to meet the operational needs of Grand Coulee Dam. For this RFI, Reclamation will determine whether potentially new or current service providers are interested in doing business with the Bureau of Reclamation for long-term Lead Paint/Coal Tar abatement and disposal services. PROCESS: This request is to gather information from interested parties and is deemed essential as part of our collaborative, deliberate planning process for Reclamation in identifying and evaluating alternatives for long-term Lead Paint/Coal Tar abatement and disposal services. Interested parties should answer the following questions and provide the requested information: Briefly describe the abatement services that your company provides. The following is a summary of general functional areas: 1) Abatement Processes 2) Inspection Processes 3) Quality Control Processes 4) Schedule Process (reference the schedule in draft PWS) 5) Disposal Processes Provide comments to the Draft PWS: 1) Recommendations for the scope of work 2) Are their more efficient processes available? Provide a brief summary. 3) Are their more cost-efficient processes available? Explain how the cost savings would be derived. Demonstrate your capability by providing recent and relevant (completed within the past three years and for similar work) past performance history. Please provide no more than three references to include contract number, location, contract value, period of performance, scope of work, and a point of contact: 1) What is your experience in being a prime contractor? Also, what is the maximum number of subcontractors you had on one contract with a scope of work similar to this one? 2) Please describe how your work experience makes your company a capable contractor to complete a service of this scope and magnitude. Based on the tasks, what would be the recommended benefit of using Lowest Price Technically Acceptable versus best value trade-off (when evaluating Contractor proposals)? Provide supporting information for your recommendation. Based on your performance of similar services, provide examples of some factors that would provide the most advantageous trade off factors for best value trade-offs? Based on your performance of similar services, what pricing scheme(s) would you recommend for the Unscheduled Work? FAR clause 52.219-14 states that at least 50% of the cost of contract performance incurred for personnel shall be expended for employees of the concern. How have you complied with this regulation in the past for similar contracts? Does your company have the cash flow or resources available to manage a multiple task orders if the Government pays on a monthly basis? Based on the projected workload, how long will you be able to sustain payroll, should a delay in payment outside of our office's control occur? Responses to this RFI must include the following: A brief description of the Contractor's primary business line(s): Contractor's DUNS number and Cage Code. The socioeconomic status of the Contractor with this response, if any (8(a), HUBZone, Service-Disabled Veteran, economically-disadvantage-women, large business, etc). For a copy of the draft Performance Work Statement, please email the contract specialist listed below with your company information to include: Company name, contact information and DUNS number. Submitted responses should be in Microsoft Word or Adobe Acrobat format and shall be no longer than 15 pages. DISCLAIMER: This RFI is issued solely for information and planning purposes and does not constitute a solicitation. All information received in response to this RFI will be treated as business confidential information and exempted from disclosure under the Freedom of Information Act. Nonetheless, submitters should properly mark their responses if the information is confidential. Responses to the RFI will not be returned. In accordance with FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expense associated with responding to this RFI. Process and Timing: Timing: To be assured consideration, all Statements of Interest (SOIs) shall be submitted and received by Reclamation on or before 3/25/2019. All information received in response to this RFI will be treated as business confidential information and exempted from disclosure under the Freedom of Information Act. Nonetheless, submitters should properly mark their responses if the information is confidential. Responses to the RFI will not be returned. Submission of Interest: Reclamation will accept SOIs that are submitted via email to: Paula Collins - pcollins@usbr.gov Questions: Questions regarding this RFI will be accepted via e-mail at: pcollins@usbr.gov Answers will be posted on this website to make them available to all interested parties. HOW TO RESPOND: Please submit Statements of Interest no later than 03/25/2019. Preferred media is electronic copies in Adobe. Preferred method of submission is via email to pcollins@usbr.gov POINTS OF CONTACT: Paula Collins, Contract Specialist, pcollins@usbr.gov PLACE OF PERFORMANCE: Address: Bureau of Reclamation, Grand Coulee, WA 99133 Country: United States