Inactive
Total Small Business Set-Aside (FAR 19.5)
Notice ID:140P8422R0007
REPLACE OAK BOTTOM WATER DISTRIBUTION SYSTEMS & SEWER COLLECTION SYSTEM, WHISKEYTOWN NATIONAL RECREATION AREA, SHASTA COUNTY, CALIFORNIA. The National Park Service (NPS) at Whiskeytown National Recrea...
REPLACE OAK BOTTOM WATER DISTRIBUTION SYSTEMS & SEWER COLLECTION SYSTEM, WHISKEYTOWN NATIONAL RECREATION AREA, SHASTA COUNTY, CALIFORNIA. The National Park Service (NPS) at Whiskeytown National Recreation Area (WHIS), located within Shasta County, California, has a requirement for the replacement of the Oak Bottom Water Distribution Systems & Sewer Collection System. The project is located at Whiskeytown National Recreation Area, throughout the Oak Bottom Marina. The Work consists of the removal and replacement of the existing potable water distribution system and the removal and replacement of the existing sanitary sewer collection system. The Contractor shall provide all supervision, labor, equipment, testing, and supplies necessary to complete the work as identified in the project specifications and associated documents provided as attachments to the solicitation. All work shall be performed in accordance with local, state, and federal laws. The Contractor shall obtain all necessary permits required to successfully complete the work. Per FAR 36.204 the project range is estimated to be between $1,000,000 and $5,000,000. The North American Industry Classification System (NAICS) Code for this requirement is 237110, with a corresponding size standard of $39.5 million in annual gross receipts for the past three years. This acquisition is a Total Small Business Set-Aside. Offers are solicited only from small business concerns. Offers received from concerns that are not small business concerns shall be considered nonresponsive and will be rejected. Contract bid item work includes: Mobilization and Demobilization (this item consists of all preparatory work and operations for all items under the contract, including, but not limited to those necessary for the movement of personnel, equipment, supplies, and incidentals to the project site and all other work or operations which shall be performed or costs incurred prior to beginning work on the various items on the project site; this item also includes bonding, permits, and demobilization cost); Saw Cut and Demolish Existing Pavements (this item consists of saw-cutting, demolishing and disposing of existing pavements, regardless of type, to the extent shown in the plans); Remove Curb and Gutter (this item consists of saw-cutting, demolishing and disposing of existing curb and gutter to the extent shown in the plans); Remove Existing Water Mains and Apparatuses (this item consists of removing and disposing of existing water mains and apparatuses, including but not limited to valves, fittings, hydrants, thrust blocks, air releases, and services); Remove Existing Sanitary Sewer (this item consists of removing and disposing of existing sanitary sewer regardless of type or size); Remove Existing Manhole (this item consists of removing and disposing of existing sanitary manholes, including bases and apparatuses, regardless of type or size); Bypass Pumping & Temporary Water (this item consists of bypass pumping of sanitary sewers and providing temporary water service during construction); HDPE Water Main - 8" Trenched (this item consists of constructing 8" HDPE water main as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing watermain, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; this item also includes compaction testing); HDPE Water Main - 6" Trenched (this item consists of constructing 6" HDPE water main as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing watermain, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; this item also includes compaction testing); HDPE Water Main - 4" Trenched (this item consists of constructing 4" HDPE water main as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing watermain, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; this item also includes compaction testing); HDPE Fittings (this item consists of furnishing and installing all HDPE water main pipe fittings; this item includes, but is not limited to pipe bends, tees, crosses, and end caps; this item does not include HDPE fittings that are associated with other assemblies such as hydrants, service connections, and air valves); Fire Hydrant Assembly (this item consists of furnishing and installing fire hydrant assemblies as shown in the plans; this item includes but is not limited to excavation, backfilling, fire hydrant, lateral piping, gate valve, tracer wire, and tee fitting); Air Relief /Vacuum Valve (this item consists of furnishing and installing Air Relief/Vacuum Valve assemblies as shown in the plans; this item includes but is not limited to excavation, backfilling, air valve, lateral piping, couplings, valves, fittings, handhole, tracer wire, and other apparatuses required for the full assembly as shown in the plans); 8" Gate Valve & Box (this item consists of furnishing and installing 8" gate valves and boxes as shown in the plans); 6" Gate Valve & Box (this item consists of furnishing and installing 6" gate valves and boxes as shown in the plans); 4" Gate Valve & Box (this item consists of furnishing and installing 4" gate valves and boxes as shown in the plans); Non-Fire Service Connection (this item consists of furnishing and installing Non-Fire Service Connections as shown in the plans; this item includes excavation, backfilling, service line piping, corp. stops, service and saddle tees, couplings, and adaptors as required to connect to existing service connections as shown in the plans; this item includes up to 10 feet of various sized copper service lines required for stub outs to connect to existing service lines or extending and connecting to new curb stops; service lines longer than 10 feet, and those extending downstream of new curb stops will be measured and paid separately); Copper Service Line - 2" Trenched (this item consists of constructing 2" Copper water service line as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing water service line, furnishing and installing pipe bedding, backfill, tracer wire, marker tape and surface restoration); Copper Service Line - 1" Trenched (this item consists of constructing 1" Copper water service line as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing water service line, furnishing and installing pipe bedding, backfill, tracer wire, marker tape and surface restoration); 2" Curb Valve & Box (this item consists of furnishing and installing Air Relief/Vacuum Valve assemblies as shown in the plans; this item includes furnishing and installing valves and valve boxes); 1" Curb Valve & Box (this item consists of furnishing and installing Air Relief/Vacuum Valve assemblies as shown in the plans; this item includes furnishing and installing valves and valve boxes); Yard Hydrant (this item consists of furnishing and installing Yard Hydrants as shown in the plans; this item includes but is not limited to excavation, backfilling, hard hydrant, service lateral piping, curb valve, tracer wire, and tee fitting); Water System Pressure Testing (this item consists of performing and furnishing all materials necessary to complete the water system pressure testing per the specifications); Water System Disinfection (this item consists of performing and furnishing all materials necessary to disinfect the water system per the specifications); Sanitary Sewer - 8" Trenched (this item consists of constructing 8" Sanitary Sewer as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing sewer, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; this item also includes compaction testing); Sanitary Sewer Service - 4" (this item consists of constructing 4" Sanitary Sewer Service as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing sewer, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; this item also includes compaction testing); Sanitary Sewer - Service Connection (this item consists of constructing Sanitary Sewer Service Connections as shown in the plans; this item includes, but is not limited to, pipe trenching, furnishing and installing fittings, furnishing and installing pipe bedding, backfill, tracer wire, marker tape; included with this bid item is up to five feet of 4" sanitary service line for making connections to existing sanitary service laterals); Connect to Existing Manhole.(this item consists of connecting proposed sanitary sewers to existing manholes to create a water-tight connection); Sanitary Manhole - 48" (this item consists of furnishing and installing 48" sanitary manholes as shown in the plans); Sanitary Cleanout (this item consists of constructing Sanitary Cleanouts as shown in the plans); Aggregate Base (this item consists of furnishing and installing Aggregate Base Material as shown in the plans; aggregate base is generally used for the restoration of aggregate and paved surfaces; this item also includes compaction testing where required); Concrete Curb & Gutter (this item consists of furnishing and installing poured concrete curb and gutter); Asphalt Pavement Restoration (this item consists of furnishing and installing asphalt pavement to restore paved areas disturbed during construction); Concrete Sidewalk (this item consists of furnishing and installing poured concrete sidewalk as shown in the plans); Non-Pavement Surface Restoration (this item consists of miscellaneous costs associated with restoration and clean-up of disturbed non-pavements surfaces throughout the project area; this item includes but is not limited to removal of temporary equipment and controls, rubbish and debris removal, final surface smoothing, cleaning of stockpile areas, and repair and restoration of miscellaneous areas and items damaged during construction); and Traffic Control (this item consists of developing a traffic control plan and implementing the plan throughout the duration of the project). The Request for Proposal (RFP) will be available on/about June 9, 2022, by electronic means only and can be downloaded along with all related attachments from the Contracting Opportunities website at www.sam.gov. The RFP will close 30 days from the actual date of issuance. The offeror is responsible for periodically checking the website for any Amendments that may be issued prior to the closing date of the RFP. The Government intends to award a single, firm-fixed-price contract. Award selection will be made on a Best Value determination made after consideration of price and factors other than price (relevant experience, California contractor license, technical competence of key personnel, scheduling and project management, and past performance) as listed in the Request for Proposal. An organized site visit will be scheduled. While not mandatory, offerors are urged and expected to inspect the site where the work will be performed. See Section L of the RFP (when issued) for more information regarding the date, time, and location of the site visit.
