Inactive

Single Award Indefinite Delivery, Indefinite Quantity (IDIQ) Contract for Seismic Equipment with 5-year ordering period The purpose of this amendment is to answer submitted questions and extend the du... Single Award Indefinite Delivery, Indefinite Quantity (IDIQ) Contract for Seismic Equipment with 5-year ordering period The purpose of this amendment is to answer submitted questions and extend the due date until 04/19/2024 1500PST. No additional questions may be accepted. Contractors are required to sign and return copies to the issuing agency. This procurement follows the procedures outlined in FAR Part 12, Acquisition of Commercial Products and Commercial Services, and FAR Part 15, Contracting by Negotiation. This is a solicitation for a firm fixed price indefinite delivery-indefinite quantity (ID/IQ) contract for seismic equipment throughout a five-year period. The equipment will be ordered through specific delivery orders issued as specified in the contract using the pricing stated in the award document. The Government shall place the first order totaling the minimum of $50,000.00 over the full term of the contract, concurrent with the issuance of the Basic Contract. The maximum quantity for the full term of the contact shall not exceed $20,000,000.00. This maximum quantity is not a representative to an offeror or contractor that the maximum quantity will be required or ordered or that conditions affecting delivery orders will be stable or normal. The initial task order under this contract will fulfill the minimum quantity requirement and will be awarded concurrently with the award of this contract. Under terms of this contract, the Government shall place orders totaling a minimum of $50,000.00 over the ordering period of the Contract. The five-year ordering period (currently estimated as 06/01/2024 through 05/31/2029) may be adjusted based on the actual award date of the contract to permit an ensuing five-year ordering period. All dates in this document referring to the above five-year period will be adjusted accordingly at contract award. The contract will be structured to allow for delivery orders against the resultant IDIQ contract to be fixed-price. Firm fixed-price delivery orders issued will be based upon the fixed price equipment category prices. Contractor shall provide equipment in accordance with the attached salient characteristic document Titled "TestingSpecs2024" or otherwise described in individual delivery Orders. NAICS: 334513: Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables, 750. PSC Code: 6655: Geophysical Instruments. FOB destination requested. Delivery address: USGS, SGS Albuquerque Seismic Lab, Target Rd 10002 Isleta SE, Kirtland AFB NM 87117. Evaluation criteria: trade-off. Equipment Requirement: New equipment ONLY, NO grey market or refurbished products. All items must be covered by the manufacturer's warranty. Your company must be registered and active in System for Award Management (www.sam.gov) at time of proposal submission. Please submit Unique Entity Identification (UEI) number with proposal. Your submission shall include the following: 1. Signed SF 1449 form filled in with firm information, person signing, and line-item prices, offered, etc) on Block 17a and Block 30a-c. 2. Firm, fixed price proposal. Prospective contractors will provide individual pricing for all equipment categories over the 5-year ordering period, including estimated delivery time by completing the attached Schedule of Pricing. Each year shall be individually priced in a clear and concise format. 3. Technical submission. Include product specifications or literature, country of manufacture, etc. 4. Past Performance. Provide list of prior recent and relevant contracts; within (3) years and similar scope. Vendor shall provide contact information for at least (3) references. 5. System for Award Management UEI. Questions are due in writing to yangzhideng@usgs.gov by 03/19/2024, 1500 PST. Responses are due to the Contract Specialist's email address at yangzhideng@usgs.gov by 04/12/2024, 1500 PST. Proposals submitted by hardcopy shall not be accepted or considered.

Inactive

Pre-solicitation Synopsis: The Department of the Interior (DOI), United States Geological Survey (USGS), Albuquerque Seismic Lab, New Mexico, seeks to award a firm fixed price, Indefinite Delivery, In... Pre-solicitation Synopsis: The Department of the Interior (DOI), United States Geological Survey (USGS), Albuquerque Seismic Lab, New Mexico, seeks to award a firm fixed price, Indefinite Delivery, Indefinite Quantity (IDIQ) Contract for seismic equipment described in the attached technical specifications. The U.S. Geological Survey (USGS) has a requirement to purchase earthquake and volcano monitoring systems, including integrated systems (containing both sensors and data acquisition units (DAUs)) and systems comprised of separate DAUs and sensors (either strong motion sensors or broadband sensors). This equipment will support the Global Seismographic Network (GSN), the Advanced National Seismic System (ANSS), regional networks, and the USGS Volcano Program to serve the needs of earthquake and volcano monitoring, engineering, and research communities as well as national, state, and local governments, emergency response organizations, and the public. Specifications Note: The systems must be existing, upgraded, or improved versions of models which can be purchased "off-the-shelf" and of a type or types that have been utilized in previous deployments for periods of not less than six (6) months. The required instrumentation systems consist of three components: (1) a triaxial force-balance accelerometer, triaxial strong-motion velocity seismometer, or triaxial broadband seismometer (the "sensor"); (2) a DAU, and (3) software for communicating with deployed units. When the DAU and sensor are integrated into a single package, the system is called a DAS (Data Acquisition System). These specifications are organized by sensor, DAU, environmental and packaging issues that apply to both sensors and DAUs, software, and additional requirements. The scope of this action includes the requirement to provide all of the instrumentation components which includes but may not be limited to cables, connectors, related accessories and ancillary equipment. Software must be included with all DAUs and DASs if required for data acquisition. Additional information and specifications can be found in the following attachments. Spreadsheet - Titled "TestSpecs2023_pcb" NAICS Code: 334513 Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables. Size Standard 750. PSC Code: 6655 Geophysical Instruments. The anticipated award will be for a contract with a (5) year ordering period with an estimated start date of May 1, 2024. Solicitation 140G0324R0002 will be available in mid-January, IAW FAR 5.102(a)(1). The USGS is contemplating an Indefinite Delivery, Indefinite Quantity Contract in accordance with the procedures of Federal Acquisition Regulation (FAR) Part 12 (Acquisition of Commercial Items) and FAR Part 15 (Contracting by Negotiation). This notice and any resulting solicitation or contract conform to the requirements in place through FAC 2023-06, effective 4 December 2023. All information submitted in response to this notice is voluntary. The Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government. Materials submitted to the Government for review will not be returned. Prospective contractors are not required to respond to this pre-solicitation notice. Responses or inquiries shall only be accepted through electronic mail addressed to Yangzhi Deng at yangzhideng@usgs.gov no later than January 12, 2024 at 1500 PST. Contracting POC: Yangzhi Deng, Contract Specialist USGS Branch of Acquisition and Grants, Sacramento Office 3020 State University Drive East, Modoc Hall Suite 2002 Sacramento, CA 95819 yangzhideng@usgs.gov