Inactive

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this... AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR11191963 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-01. The associated North American Industrial Classification System (NAICS) code for this procurement is 314999 with a small business size standard of 500.00 employees. This requirement is unrestricted and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-12-27 11:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Miami, FL 33172 The DOS International Narcotics Law Enforcement Affairs - Department of State requires the following items, Brand Name or Equal, to the following: LI 001: Hi-5 370 TM Dome, Glide Modulation Glide Modulation system, with silent dome, with the following specifications; Hi-5 370TM Main Hi-5 370TM Reserve Glide Ratio; 5:1 Maximum deployment altitude: 7620 m (25,000 ft) above sea level Departure altitude (free-fall) min. recommended: 1524 m (5000 ft) AGL Deployment Altitude min. recommended: 1067 m (3500 ft) AGL Dome area : 34.3 m² Number of cells: 11 Maximum total weight: 220 kg (485 lbs) Minimum total weight: 95 kg (210 lbs) Deployment methods of main parachute : -Spring loaded pylon Double bag static line - Throw out pylon at the bottom of the container -Brake deployment (multi-mission system) Rate of descent with 159 kg/350 lbs: 2.3 m/s or 7.5 ft/s Parachute reserve certificate: PIA TS-135 v1.4 Color: Green, 20, EA; LI 002: jTrax Navaid system or similar: displays three types of screen for the jumper, the master screen which is used in the aircraft to check the progress of the flight towards the release point. Navigation screen, to be used under the canopy to guide the jumper to the landing zone. Map display of the area below the jumper during flight under the canopy. is fully integrated with the jTrax mission planning software developed by Airborne Systems for GPADS and military freefall operations. It includes: a pilot unit, a display screen, a support board or harness and a support compass, solid module uses a proven sensor suite based on the avionics of Airborne Systems' Precision Guided Aerial Delivery Systems (GPADS) family. Dimension 13 cm x 13 cm x 4 cm (5" x 5" x 1.5") Weight 750 g (1.7 lbs.), 20, EA; LI 003: HI-5 370 canopy part number PN 826202-1 or similar, also include new set (1 pair) of main risers, 1 x main deployment bag and 1 X BOC pilot chute replacement., 8, EA; LI 004: Maintenance kit - Spare parts kit No.1 systema, edge mmps large, coyote 838814-1 - Spare parts kit No. 1 dbsl, hi-5 370, coyote 838983-1 - Maintenance kit No.1 edge mmps large, coyote 838815-1 - Spare parts kit No.1 systema, edge mmps large, coyote 838923-1 - Spare parts kit No.1 dbsl, hi-5 370, coyote 838924-1 - Maintenance kit No.1 edge mmps large, coyote 838802-1 or similar, 2, EA; LI 005: HIGH PERFORMANCE INSTRUCTOR PARACHUTE 150 RSL or similar, and skyhook and suitable receiver container. All hardware and metal components in stainless steel. Collapsible kill line pilot chute. Reserve handle on cushion and phat daddy soft reserve ripcord not metal glove. Type 7 container Anti-twist main risers Easy grip control handles Deluxe stabilizing foam Equipped for AAD use Articulated harness as much articulation as possible Articulated chest strap with stainless articulation rings Leg pads Easy access window to observe AAD Easy access window to observe reserve pin Freefly pilot handle Freefly pilot handle Three stow main parachute packing bag Stainless steel three-ring system Dynamic corners, dynamic corners on lids for cleaner openings avoids high speed opening malfunctions Hook type leg connectors Tactical type quick release buckle Protective leg covers Flag anchor points on harness Color OD green more durable less deterioration High performance wing Assertive and forgiving dynamic flight Recovery curve and ease of handling Provides the flight step from an intermediate skydiver in skills and experience to an experienced pilot Perfect wing to increase capabilities of those who are profiled as coaches and instructors Additionally allows to be a good working vehicle for instructors and coaches in student exercises Size 150. Color yellow and black, 2, EA; LI 006: HIGH-PERFORMANCE PARACHUTE FOR INSTRUCTOR 170 RSL or similar, and skyhook and suitable receiver container. All hardware and metal components in stainless steel. Collapsible kill line pilot chute. Reserve handle on cushion and phat daddy soft reserve ripcord not metal glove. Type 7 container Anti-twist main risers Easy grip control handles Deluxe stabilizing foam Equipped for AAD use Articulated harness as much articulation as possible Articulated chest strap with stainless articulation rings Leg pads Easy access window to observe AAD Easy access window to observe reserve pin Freefly pilot handle Freefly pilot handle Three stow main parachute packing bag Stainless steel three-ring system Dynamic corners, dynamic corners on lids for cleaner openings avoids high speed opening malfunctions Hook type leg connectors Tactical type quick release buckle Protective leg covers Flag anchor points on harness Color OD green more durable less deterioration. High performance wing Assertive and forgiving dynamic flight Recovery curve and ease of handling Provides the flight step from an intermediate skydiver in skills and experience to an experienced pilot Perfect wing to increase capabilities of those who are profiled as coaches and instructors Additionally allows to be a good working vehicle for instructors and coaches in student exercises Size 170. Color yellow and black, 2, EA; LI 007: RIGGER KIT: TOOLS S7495 Professional Rigger's Kit Bag, I1524N Cypress Packers Kit, Multi Tool, S7668 Molar Strap, S7664 Closing Plate, S7667 Locking Draw Cord, S7175 Aluminum Rod S7175, S7179 Aluminum Tapered Rod, S7470 Seam Tearer, S7190 Seam S7190 Palm, S7210 Needles, S7325 Ultimate Closing Device 12" with T-bar, (2) S7610 T Bodkin, (2) S7230 Packing hook, (4) S7405 Packing pin with flag, S7935 Temporary pin with hollow end, S7938 Temporary pin with hollow end XL, S7290 Parachute technician log book, S7330 Press seals and dies, S7360 Lead seals, S7370 Safety tie, S7310 Emergency parachute data cards, S7110 Bag of ¼ lb rubber bands, S7122 Bag of ¼ lb short rubber bands, S7120 Line holder , S7025 Square standby tensioning device, S7000 Apex Tie Down, M5995 Pull control tool, S7250 Beeswax, S7995 Stainless Steel Fid (set of 3), S7410 Rigging Forceps,S7010-8 8" Bent Trimmer, S8704 5" Straight Hemostatic Clamp, S7989 Scale Kit and Fabric Test Clamp, RB6 Parachute Installer's Reference DVD, T1052 Lite Super Tack Rope, 4" Adjustable Wrench. or similar, 2, EA; LI 008: ROLL OF 100 YARDS TYPE IIA WHITE SLEEVE. 100 yard roll. White sleeve for Type II line that has been flattened and sized. Used to close loops. Diameter 3/16". Weight per roll: 1 lb (455 g) or similar, 10, EA; LI 009: "W903-ROLL OF NYLON RIPSTOP ADHESIVE TAPE. Great way to make quick and easy patches without sewing or heating. Simply cut a piece of tape from the roll, peel the paper off the backing of the adhesive and press over the tear. Size: 2"" (5 cm) X 25' (7.6 meters) roll. 10 pieces GREEN COLOR, 10 pieces White Color, Weight: 8 oz. (225g)" or similar., 20, EA; LI 010: REPLACEMENT KIT FOR HI-5: - Six (06) units Reserve parachute operating handles, Six (06) units Main parachute release pad, Six (06) units of BOC, Sixty (60) units of main parachute closing loops, Three (03) units of reserve parachute deployment bag with pylon and bridle, Eighty (80) packs of elastic bags. or similar, 1, EA; LI 011: TWIN OTTHER DHC-6 aircraft door for parachute practice. IKHANA Lexan Roll Up Door Assembly. Part number PD00-0001-501 PRODUCT: DHC-6 Roll-Up Door APPLICABILITY: Viking de Havilland DHC-6. DESCRIPTION: IKHANA’s Roll-Up Door suited for both paratroop and cargo operations providing a segmented door that can be opened in-flight. Features of the installation include: Manufactured from clear polycarbonate panels, Can be used with a swinging forward passenger door, Internal handhold is included along the top of the door opening, Retractor reels with cables at forward and aft ends assist with door opening. With Supplemental Type Certificate (STC) Certification //, 1, EA; LI 012: PELICAN TRANSPORT BOXES PELICAN #1626, 20, EA; LI 013: 530 ft2 Reserve Tandem canopy, Tandem Master harness container, Passenger-harness, Designed for tactical operations, Ruck and weapon attachment, K-9 harness attachment, Ancillary equipment to support Oxygen systems, weapons, radio, etc Specifications, Maximum all-up-weight: 660 lb – 300 kg, Minimum all-up-weight: 300 lb – 135 kg, Maximum opening altitude:25,000 ft, Minimum opening altitude: 5,000 ft, Maximum aircraft speed: 130 KIAS, Deployment of the main canopy by drogue only Canopy, Main-on-main configuration (identical performances), Main characteristics: 9 cells canopy, Fully elliptical, 4.5:1 glide ratio, Glide-modulation capable, No stall, Silent in flight, Light toggle pressure, Powerful flare Harness Container, Based on the PS-2 harness/container, Sized to accommodate the 530ft2 main and reserve canopy, Drogue attachment in the center of the container., 1, EA; LI 014: TRAINING PACKAGE: "MILITARY FREE FALL JUMP" FOCUSED ON FORMATIONS AND OPERATIONAL TACTICAL NAVIGATION WITH TACTICAL EQUIPMENT FOR 30 PAX, INCLUDES MAIN CANOPY INSTALLER, RESERVE CANOPY INSTALLER AND COMPLETE EQUIPMENT ASSEMBLY; AS WELL AS INSPECTION, ASSEMBLY AND MAINTENANCE OF THE EQUIPMENT SYSTEM. MUST INCLUDE THE TRAINING OF "MASTER INSPECTION PERSONNEL, TO CALCULATE THE EXIT POINT, ACTIONS ON THE AIRCRAFT AND POINT OF IMPACT PI, 1, EA; LI 015: TRAINING AND QUALIFICATION FOR TWO (02) RIGGERS SPECIALIZED IN THE MENTIONED EQUIPMENT WITH FAA CERTIFICATION, 1, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at https://marketplace.unisonglobal.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOS International Narcotics Law Enforcement Affairs - Department of State intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison Marketplace. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOS International Narcotics Law Enforcement Affairs - Department of State is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerors that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at https://marketplace.unisonglobal.com. There is no cost to register, review procurement data or make a bid on https://marketplace.unisonglobal.com. Offerors that are not currently registered to use https://marketplace.unisonglobal.com should proceed to https://marketplace.unisonglobal.com to complete their free registration. Offerors that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerors may not artificially manipulate the price of a transaction on https://marketplace.unisonglobal.com by any means. It is unacceptable to place bad faith bids, to use decoys in the https://marketplace.unisonglobal.com process or to collude with the intent or effect of hampering the competitive https://marketplace.unisonglobal.com process. Should offerors require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. If this is a “Brand Name Only” procurement, Seller certifies that it is an authorized distributer of the brand name product being sold to the Department of State and that it has the certification/specialization level required by the manufacturer, to support both the product sale and product pricing, in accordance with applicable manufacturer certification/specialization requirements. Unless otherwise specified, Seller warrants that the products are new and in their original box(es). In addition to providing pricing at www.UnisonMarketplace.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation; these shall be uploaded with the Offeror's bid via Unison Marketplace. This solicitation requires registration with the System for Award Management (SAM) prior to award, pursuant to FAR 4.1102 and other applicable regulations and guidelines. Information can be found at www.sam.gov. Registration must be "ACTIVE" at the time of award. All Bids must be valid for 90 days from the closing date for this solicitation. No exceptions or qualifications. New equipment ONLY, NO grey market or refurbished products. Items must be in original packaging, never used, and not altered in any way. Components of the requested equipment, to include memory, must be manufacturer-approved and may not be compatible, remanufactured, or refurbished equipment. All items must be covered by manufacturer’s warranty and procured through a manufacturer approved distribution channel. Sellers must be able to document their ability to provide items through manufacturer approved distribution channels upon request. The Seller confirms to have sourced all products submitted in this Bid from manufacturer-approved channels for Federal sales, in accordance with all applicable laws and manufacturer’s current applicable policies at the time of purchase. Seller must be able to support both the product sale and product pricing, in accordance with applicable manufacturer certification / specialization requirements. If software is provided or included, Seller shall, upon request, provide Buyer with a copy of the End User License Agreement. Seller certifies that all software is licensed originally to Buyer as the original licensee authorized to use the software. All bid prices must include shipping FOB Destination. No partial shipments are permitted, unless otherwise specified by Contracting Officer at time of award. To be considered for award, all Sellers must be manufacturer federally authorized distributors/resellers of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the timeframes specified by the Buyer on the award. Sellers shall be required to provide documentation as proof of authorization to be considered for award. The Offeror shall not complete the representation at paragraph (d)(1) of this provision if the Offeror has represented that it “does not provide covered telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument” in the provision at 52.204-26, Covered Telecommunications Equipment or Services—Representation, or in paragraph (v) of the provision at 52.212-3, Offeror Representations and Certifications-Commercial Items. (a) Definitions. As used in this provision— Backhaul, covered telecommunications equipment or services, critical technology, interconnection arrangements, reasonable inquiry, roaming, and substantial or essential component have the meanings provided in the clause 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. Nothing in the prohibition shall be construed to— (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract or extending or renewing a contract with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. Nothing in the prohibition shall be construed to— (i)Prohibit the head of an executive agency from procuring with an entity to provide a service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (ii)Cover telecommunications equipment that cannot route or redirect user data traffic or cannot permit visibility into any user data or packets that such equipment transmits or otherwise handles. (c) Procedures. The Offeror shall review the list of excluded parties in the System for Award Management (SAM) (https://www.sam.gov) for entities excluded from receiving federal awards for “covered telecommunications equipment or services”. (d) Representation. The Offeror represents that— (1)It ? will, ? will not provide covered telecommunications equipment or services to the Government in the performance of any contract, subcontract or other contractual instrument resulting from this solicitation. The Offeror shall provide the additional disclosure information required at paragraph (e)(1) of this section if the Offeror responds “will” in paragraph (d)(1) of this section; and (2)After conducting a reasonable inquiry, for purposes of this representation, the Offeror represents that— It ? does, ? does not use covered telecommunications equipment or services, or use any equipment, system, or service that uses covered telecommunications equipment or services. The Offeror shall provide the additional disclosure information required at paragraph (e)(2) of this section if the Offeror responds “does” in paragraph (d)(2) of this section. (e) Disclosures. (1) Disclosure for the representation in paragraph (d)(1) of this provision. If the Offeror has responded “will” in the representation in paragraph (d)(1) of this provision, the Offeror shall provide the following information as part of the offer: (i)For covered equipment— (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the original equipment manufacturer (OEM) or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (ii)For covered services— (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the Product Service Code (PSC) of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(1) of this provision. (2) Disclosure for the representation in paragraph (d)(2) of this provision. If the Offeror has responded “does” in the representation in paragraph (d)(2) of this provision, the Offeror shall provide the following information as part of the offer: (i)For covered equipment— (A)The entity that produced the covered telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known); (B)A description of all covered telecommunications equipment offered (include brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); and (C)Explanation of the proposed use of covered telecommunications equipment and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (ii)For covered services— (A)If the service is related to item maintenance: A description of all covered telecommunications services offered (include on the item being maintained: Brand; model number, such as OEM number, manufacturer part number, or wholesaler number; and item description, as applicable); or (B)If not associated with maintenance, the PSC of the service being provided; and explanation of the proposed use of covered telecommunications services and any factors relevant to determining if such use would be permissible under the prohibition in paragraph (b)(2) of this provision. (End of provision) (a) Definitions. As used in this clause— Backhaul means intermediate links between the core network, or backbone network, and the small subnetworks at the edge of the network (e.g., connecting cell phones/towers to the core telephone network). Backhaul can be wireless (e.g., microwave) or wired (e.g., fiber optic, coaxial cable, Ethernet). Covered foreign country means The People’s Republic of China. Covered telecommunications equipment or services means– (1) Telecommunications equipment produced by Huawei Technologies Company or ZTE Corporation (or any subsidiary or affiliate of such entities); (2) For the purpose of public safety, security of Government facilities, physical security surveillance of critical infrastructure, and other national security purposes, video surveillance and telecommunications equipment produced by Hytera Communications Corporation, Hangzhou Hikvision Digital Technology Company, or Dahua Technology Company (or any subsidiary or affiliate of such entities); (3) Telecommunications or video surveillance services provided by such entities or using such equipment; or (4) Telecommunications or video surveillance equipment or services produced or provided by an entity that the Secretary of Defense, in consultation with the Director of National Intelligence or the Director of the Federal Bureau of Investigation, reasonably believes to be an entity owned or controlled by, or otherwise connected to, the government of a covered foreign country. Critical technology means– (1) Defense articles or defense services included on the United States Munitions List set forth in the International Traffic in Arms Regulations under subchapter M of chapter I of title 22, Code of Federal Regulations; (2) Items included on the Commerce Control List set forth in Supplement No. 1 to part 774 of the Export Administration Regulations under subchapter C of chapter VII of title 15, Code of Federal Regulations, and controlled- (i) Pursuant to multilateral regimes, including for reasons relating to national security, chemical and biological weapons proliferation, nuclear nonproliferation, or missile technology; or (ii) For reasons relating to regional stability or surreptitious listening; (3) Specially designed and prepared nuclear equipment, parts and components, materials, software, and technology covered by part 810 of title 10, Code of Federal Regulations (relating to assistance to foreign atomic energy activities); (4) Nuclear facilities, equipment, and material covered by part 110 of title 10, Code of Federal Regulations (relating to export and import of nuclear equipment and material); (5) Select agents and toxins covered by part 331 of title 7, Code of Federal Regulations, part 121 of title 9 of such Code, or part 73 of title 42 of such Code; or (6) Emerging and foundational technologies controlled pursuant to section 1758 of the Export Control Reform Act of 2018 (50 U.S.C. 4817). Interconnection arrangements means arrangements governing the physical connection of two or more networks to allow the use of another's network to hand off traffic where it is ultimately delivered (e.g., connection of a customer of telephone provider A to a customer of telephone company B) or sharing data and other information resources. Reasonable inquiry means an inquiry designed to uncover any information in the entity's possession about the identity of the producer or provider of covered telecommunications equipment or services used by the entity that excludes the need to include an internal or third-party audit. Roaming means cellular communications services (e.g., voice, video, data) received from a visited network when unable to connect to the facilities of the home network either because signal coverage is too weak or because traffic is too high. Substantial or essential component means any component necessary for the proper function or performance of a piece of equipment, system, or service. (b) Prohibition. (1) Section 889(a)(1)(A) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2019, from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system. The Contractor is prohibited from providing to the Government any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. (2) Section 889(a)(1)(B) of the John S. McCain National Defense Authorization Act for Fiscal Year 2019 (Pub. L. 115-232) prohibits the head of an executive agency on or after August 13, 2020, from entering into a contract, or extending or renewing a contract, with an entity that uses any equipment, system, or service that uses covered telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless an exception at paragraph (c) of this clause applies or the covered telecommunication equipment or services are covered by a waiver described in FAR 4.2104. This prohibition applies to the use of covered telecommunications equipment or services, regardless of whether that use is in performance of work under a Federal contract. c) Exceptions. This clause does not prohibit contractors from providing— (1) A service that connects to the facilities of a third-party, such as backhaul, roaming, or interconnection arrangements; or (2) Telecommunications equipment that cannot route or redirect user data traffic or permit visibility into any user data or packets that such equipment transmits or otherwise handles. (d) Reporting requirement. (1) In the event the Contractor identifies covered telecommunications equipment or services used as a substantial or essential component of any system, or as critical technology as part of any system, during contract performance, or the Contractor is notified of such by a subcontractor at any tier or by any other source, the Contractor shall report the information in paragraph (d)(2) of this clause to the Contracting Officer, unless elsewhere in this contract are established procedures for reporting the information; in the case of the Department of Defense, the Contractor shall report to the website at https://dibnet.dod.mil. For indefinite delivery contracts, the Contractor shall report to the Contracting Officer for the indefinite delivery contract and the Contracting Officer(s) for any affected order or, in the case of the Department of Defense, identify both the indefinite delivery contract and any affected orders in the report provided at https://dibnet.dod.mil. (2) The Contractor shall report the following information pursuant to paragraph (d)(1) of this clause (i) Within one business day from the date of such identification or notification: the contract number; the order number(s), if applicable; supplier name; supplier unique entity identifier (if known); supplier Commercial and Government Entity (CAGE) code (if known); brand; model number (original equipment manufacturer number, manufacturer part number, or wholesaler number); item description; and any readily available information about mitigation actions undertaken or recommended. (ii) Within 10 business days of submitting the information in paragraph (d)(2)(i) of this clause: any further available information about mitigation actions undertaken or recommended. In addition, the Contractor shall describe the efforts it undertook to prevent use or submission of covered telecommunications equipment or services, and any additional efforts that will be incorporated to prevent future use or submission of covered telecommunications equipment or services. (e) Subcontracts. The Contractor shall insert the substance of this clause, including this paragraph (e) and excluding paragraph (b)(2), in all subcontracts and other contractual instruments, including subcontracts for the acquisition of commercial items. (End of clause) To be considered for award, all vendors submitting bids for this requirement must self-certify conformance in their SAM.gov representations as required in FAR 52.204-24, FAR 52.204-25 and FAR 52.204-26 in accordance with FAR Interim Rule 2019-009. Vendors that fail to complete this self-certification or present with a record that does not reflect conformance at FAR 52.204-26 and FAR 52.212-3 (v) within SAM.gov will not be considered for award. (a) Definitions. As used in this provision, “covered telecommunications equipment or services” has the meaning p...