Inactive Total Small Business Set-Aside (FAR 19.5)

AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this... AMENDMENT NOTICE: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is PR10892574 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2022-07. The associated North American Industrial Classification System (NAICS) code for this procurement is 451110 with a small business size standard of $15.00M. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on https://marketplace.unisonglobal.com will start on the date this solicitation is posted, and, unless otherwise displayed at https://marketplace.unisonglobal.com, will end on: 2022-09-20 17:00:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be in the Statement of Work. The DOS International Narcotics Law Enforcement Affairs - Department of State requires the following items, Brand Name or Equal, to the following: LI 001: Rebreather System, Unity It Must have the option of ventral and dorsal use of closed circuit oxygen and semi-closed nitrox. The rebreather must be extremely compact for low water resistance while swimming. It must have a RADIAL type soda lime filter container designed for large capacity and optimum CO2 absorption. It must have Cordura® soft shield material to protect the lung of the rebreather against tears, abrasions and adapt special equipment. Front or back oxygen unit: automatic (valve on demand) and manual control (by-pass) of oxygen injection. Nitrox front unit: must have three different flow injectors available for different nitrox mixtures (60% O2, 40% O2 and 32% O2). It must be able to switch from closed oxygen circuit to semi-closed nitrox circuit and vice versa during the dive. No tools should be required for setup and operation. It must have the ability, in its NITROX dive mode, to go down to a maximum depth of 57 meter and it must have the storage temperature capacity between -30°C ÷ 70°C. Its operating temperature must be between -2°C ÷ 40°C and it must have a variable volume breathing lung capacity of 8.5 to 13 litres. It must have a RADIAL type Container with 2.2 kilos of CO2 absorbent and must contain O2 and Nitrox Cylinders must be Low Magnetic Footprint Aluminum Alloy. The capacity of the cylinders must be 0.8 lts/200 bar for NITROX and 1.5 lts/230 bar for Oxygen. And they must allow their exchange with each other for use in different types of missions.Its dimensions should not be greater than 660 x 350 x 140 (length x width x height) and it must be olive green. Its weight in the air does not exceed 16.7 kilos, with CO2 absorber included in its O2 and NITROX version. It must be neutral in the water. It must have adaptability capacity to: use in dorsal mode, increase your diving time only with larger volume cylinders, incorporate O2 partial pressure check system, use with any Full Face mask, incorporate external Bail out system (air) or direct from nitrox source. Must include basic maintenance kit. It must include a system to measure flows, for the pre-dive phase, in semi- closed circuit operations. It must include a transport box, military style, made of high resistance plastic. Must include training for use in closed circuit mode. For operators and a training for instructors in CCr. Must include maintenance training at all levels. With maintenance kits and special tools. It must have a technical service system available for online or telephone consultations, in Spanish and a representative in Colombia. With annual visit capacity for scheduled inspection. Must have gas mixing kit and it must have a cylinder with a cut-off valve for Nitrox. REFERENCES AMMV- AM-01, KIT095, BOM041B, KIT097. https://www.sielnet.com/products/rebreathers/ or similar //, 14, EA; LI 002: Tactical harness for use with closed and semi-closed circuit systems. The harness must have a plate holder system, with a molle system to adapt special equipment for amphibious use, with rebreather connections that allow front and rear connection. The harness must be a modular system to be able to adapt it to the different sizes of the operators. It must be equipped with patented quick-release buckles, guaranteeing quick release at any time. Its operation must be totally silent. It must allow the connection of several NEXUS or FASTEX buckles to allow direct integration of rescue vests or collars, such as SCORPION or others. Depending on the application requirements, it should be possible to select an upgrade with soft or hard ballistics. Ballistics in NATO standard size (300mm x 250mm) should fit on the front and rear panel and plates up to size 250mm x 120mm should fit on the sash. The front and rear covers should be designed as ONE SIZE FOR ALL. Underneath the back cover there should be tailoring loops to which the sash can be individually attached using the elastic cords for a snug and comfortable fit. It should not have integrated molded foam parts, this to achieve the lowest possible water absorption. The MOLLE system must be of international standard, so any other brand of luggage carrier or utility pocket will also fit your webbing system. Must be olive green in color. Material: CORDURA 1000D OXFORD. Weight: 1,100g (for larger sizes XL/XXL). Sizes: M / L - equivalent to EU 46-52 // XL / XXL - equivalent to EU 52-58 REFERENCE JMU-BP-03BK,https://www.sielnet.com/products/rebreathers/ or similar //, 14, EA; LI 003: Compensator for use with semi-closed and half-closed circuit system, compensator type buoyant and Collar type lifejacket. Front Wing style design, it must have a Bladder protection cover made of KEVLAR and high density 1000D cordura abrasion resistant. Bladder made of Teflon which allows efficient hygiene and quick drying, It must have elastic adjustments through plastic D'rings, which decrease its volume, It must have protection cover color: Olive Green, Dimensions: Height 59 cm / Width 55 cm / Height 15 cm (with compensator inflated). Compensator must have an inflation system for buoyant control (a bottle of 0.5 lts / 200 bar / DIN), with a first state and low pressure hose and a system for emergency (a bottle of 0.5 lts / 200 bar / DIN). Compensator must have a corrugated trachea on the left side, with manual and automatic INT inflation nozzle. Compensator must have inter-leg straps, waist strap and system to connect directly to the molle system of the plate carrier harness, in case that configuration is required. Inner bladder volume of 20 liters. Compensator must be on the front of the operator, to allow the transport of dry backpacks or special equipment on the back. REFERENCE JMU-BC-14. https://www.sielnet.com/products/rebreathers/ or similar // Compensador para uso con sistema de circuito semicerrado y semicerrado Tipo compensador de boyantes y Salvavidas tipo Collar. Diseño estilo Ala frontal, Debe poseer una funda de protección del Bladder confeccionada en KEVLAR y cordura 1000D de alta densidad resistente a abrasión. Bladder fabricado de teflón lo que permite higiene eficiente y un secado rápido, Debe poseer elásticos de ajustes a través de D´rings de plástico, los cuales, disminuyen su volumen, Debe poseer color de funda de protección: Verde Oliva, Dimensiones: Alto 59 cm / Ancho 55 cm / Alto 15 cm (con compensador inflado). Compensador debe tener un sistema de inflado para control de boyantes (una botella de 0,5 lts/ 200 bar / DIN), con un primer estado y manguera de baja presión y un sistema para emergencia (una botella de 0,5 lts / 200 bar / DIN). Compensador debe contar con una tráquea corrugada por costado izquierdo, con boquilla de inflado INT manual y automático. Compensador debe contar con correas de entre piernas, correa de cintura y sistema para conectar directo a sistema molle de arnés portaplaca, en caso de requerir ésa configuración. Volumen de bejiga interior de 20 litros de volumen. Compensador debe quedar por parte frontal del operador, objeto permita el transporte de mochilas secas o equipo especial en la espalda. REFERENCIA JMU-BC-14. https://www.sielnet.com/products/rebreathers/ o similar, 14, EA; LI 004: Oxygen O2 Booster System, must have the capacity for simultaneous charging of one to six cylinders. Must be activated by compressed air: use in open field without the need for electrical power. It must be able to be used in mobile or fixed mode. Must be easy to transport, must include watertight case with wheels, removable handle and control panel. It must use pressure differential transfer and double-acting pneumatic pumping with pressure control and variable pumping speed as working principles. It must be used to fill 100% oxygen gases and EANx (Nitrox) mixtures. Its maximum filling pressure must be self-limiting at 232 bar. It must allow to draw O2 from the source cylinder up to 25 bar. It must have a safety valve for adjustment to 255 bar. It must be able to operate at a temperature between -5°C +40°C. Its weight must not exceed 45 kilos. It must include training in correct use. It must have a technical service system available for online or telephone consultations, in Spanish language and representative in Colombia. With capacity of annual visit for programmed inspection. REFERENCES: BRO-P-08-23, KIT083, FRU076B, BRC-P-03, FRU075A. https://www.sielnet.com/products/rebreathers/ or similar //, 1, EA; LI 005: Oxygen Analyzer, Device that allows to analyze O2 in percentages from or to 100, for use in nitrox mixtures. It must have a LCD type display for easy visualization. It must have visual and audible alarms. It must have automatic diagnostics with error codes to simplify troubleshooting. It must have a power supply with AA batteries and an autonomy of not less than 1,800 hours of use, before battery replacement. It must have an electrochemical type O2 sensor to provide better temperature tracking, superior long-term stability and accuracy. Must be capable of connection to any cylinder valve. Must include a high strength plastic carrying case. Must include silicone hose with 2 lt/min dispenser and gas chamber. Must include training in correct use. REFERENCE TKAN01019711405VDG https://www.cascoantiguo.com/es/tek/control-gas-y-analizadores/analizador-oxigeno-md300-vandagraph, or similar // Analizador de Oxigeno, Dispositivo que permita analizar O2 en porcentajes de o a 100, para uso en mezclas de nitrox. Debe poseer un display tipo LCD para facil visualización. Debe poseer alarmas visuales y sonoras. Debe poseer diagnostico automatico con codigos de error para simplificar la resolución de problemas. Debe poseer fuente de alimentación con baterias AA y una autonomia no menor a 1,800 horas de uso, antes de cambio de baterias. Debe tener sensor de O2 de tipo electroquímico para que brinde un mejor seguimiento de la temperatura, una estabilidad y precisión superiores a largo plazo. Debe tener una capacidad de conexion a cualquier valvula de cilindro. Debe incluis caja de transporte, de plastico de alta resisitencia. Debe incluir manguera de silicona con dosificador de 2 lt/min y camara de gas. Debe incluir capacitación en correcto uso. REFERENCIA TKAN01019711405VDG. https://www.cascoantiguo.com/es/tek/control-gas-y-analizadores/analizador-oxigeno-md300-vandagraph, o similar, 3, EA; LI 006: CO2 absorber, must have absorption capacity of 160gr CO2/Kg. Particle size between 1.0 mm to 2.5 mm. Must be military grade, for use in rebreathers. Must be packed in 20 kg drums. REFERENCE SBMP150704MPL. https://www.cascoantiguo.com/es/buceo/rebreathers-buceo/cal-sofnolime-25-5-mm-bidon-20-kg-molecular or similar // Absorbente de CO2, Debe tener capacidad de absorción de 160gr CO2/Kg. Tamaño de partícula entre 1.0 mm a 2.5 mm. Debe ser de grado militar, para uso en rebreathers. Debe estar empacado en bidones de 20 kilos. REFERENCIA SBMP150704MPL. https://www.cascoantiguo.com/es/buceo/rebreathers-buceo/cal-sofnolime-25-5-mm- bidon-20-kg-molecular, o similar, 112, EA; LI 007: Underwater GPS system, must be compact and robust design. Made in black color. It must have a high resistance black polyurethane casing and tempered glass classified up to 200 meters depth. Its power supply must be with rechargeable AA or AA alkaline or lithium batteries, commercially replaceable by the user in the local market. It must have an autonomy greater than 35 hrs. It must have a TFT LCD transflective color screen of at least 2.2 inches. It must have a titanium butterfly support for DPV (scooter) mounting. Must have the ability to install a Bungee (elastic) attached for use on the wrist and integrated connector to install on navigation board. Must have navigation board with accurate rotating propeller to detect speed and distance through the water. It must have an underwater deployable digital buoy that allows connecting a team of divers equipped with underwater GPS to the surface. This buoy must have wireless connection with underwater GPS. It must have a low magnetic footprint. It must include software to upload GPS data to a computer. With wireless connection. It must include training in correct use. It must have technical service system available for online or telephone consultations, in Spanish language and representative in Colombia. With capacity of annual visit for scheduled inspection. REFERENCE 7300-00-A, PN7480-00, PN7467-00. https://www.sielnet.com/products/rebreathers/ or similar // Sistema de GPS Submarino, Debe ser compacto y de diseño robusto. Confeccionado en color negro. Debe poseer una carcasa de Poliuretano negro de alta resistencia y vidrio templado clasificado hasta 200 mts de profundidad. Su fuente de alimentación de ser con Baterías AA recargables o AA alcalina o de litio comercialmente reemplazable por el usuario en mercado local. Debe tener una autonomía mayor a 35 hrs. Debe tener Pantalla color transflectiva TFT LCD de mínimo 2,2 pulgadas. Debe poseer soporte de mariposa de titanio para montaje DPV (scooter). Debe poseer la capacidad de instalar un Bungee (elástico) adjunto para uso en la muñeca y conector integrado para instalar en tabla de navegación. Debe poseer tabla de navegación con hélice giratoria precisa para detectar velocidad y distancia a través del agua. Debe poseer boya digital desplegable subacuática que permite conectar un equipo de buceadores equipados con GPS submarino con la superficie. Esta boya debe tener conexión inalámbrica con GPS submarino. Debe ser de baja huella magnética. Debe incluir software para cargar datos GPS a una computadora. Con Conexión inalámbrica. Debe incluir capacitación en correcto uso. Debe poseer sistema de servicio técnico disponible para consultas online o teléfono, en idioma español y representante en Colombia. Con capacidad de visita anual para inspección programada. REFERENCIA 7300-00-A, PN7480-00, PN7467-00. https://www.sielnet.com/products/rebreathers/ o similar, 4, EA; LI 008: Underwater navigation board, it must be no larger than 30.5 cm X 25.4 cm X 12.7 cm. Its weight should not exceed 600 grams. The material of the navigation board must be black ABS, non-skid. It must have adjustable chemical light type. It must have compass marks of 5 degrees. Must have minimum 6-hour illumination capability. The visible dimensions of the compass should be Diameter 8 cm / Height 9.5 cm. Compass must be of two hemispherical type magnets. Must include depth gauge with a brightness display, an oversized scale and a range of 0-60 m. Must include watch with shockproof case, oversized button for use with gloves, wide LCD display with backlight. Must include a carrying bag and wrist strap. Must include training in correct use. REFERENCES NMU-M-03, IMW-UW- 01, IMP-UW-02 https://www.sielnet.com/products/rebreathers/ or similar //, 10, EA; LI 009: Underwater Scooter System, Must have a static thrust of 380 N / 85lbs. It must have a minimum working time of 340 min, at cruising speed, it must have a speed of 100 meters / minutes. It must have neutral buoyancy from 0 to 200 mts. It must have the capacity to give more than 12 kilometers at cruising speed. It must have adjustable speed and fixed propeller. It must include battery charger. It must have rechargeable lithium-ion battery and nominal voltage of 36 volts. It must include 2 military harness for towing and extraction operations from the water, by scooter and a tow line. It must have a connection platform for UW GPS system and for underwater navigation boards. Its weight must not exceed 30 kilos, battery included. Its manufacturing material must be made of aluminum for military use. It must be black in color. It must include a transport box. It must have bypass system, in case of problems with the command control. It must have a throttle lock. REFERENCE SX71571, SX70623, HSTE, NEROCSPK. https://www.sielnet.com/products/rebreathers/ or similar // Sistema de Scooter Submarino, Debe tener un empuje estático de 380 N / 85lbs. Debe tener un tiempo de trabajo mínimo de 340 min, en velocidad crucero.Debe tener una velocidad de 100 metros / minutos. Debe tener boyantes neutra de 0 a 200 mts. Debe tener la capacidad de dar más de 12 kilómetros a velocidad crucero. Debe poseer velocidad ajustable y hélice fija. Debe incluir cargador de batería. Debe poseer batería Ion – litio recargable y voltaje nominal de 36 volt. Debe incluir 2 arnés militar para remolque y operaciones de extracción desde el agua, por scooter y una línea de remolque. Debe poseer plataforma de conexión para sistema GPS UW y para tablas de navegación submarina. Su peso no debe ser mayor a 30 kilos, batería incluida. Su material de fabricación debe ser de Aluminio para uso militar. Debe ser de color negro. Debe incluir caja de transporte. Debe tener sistema de bypass, ante problemas con control de mando. Debe tener seguro de acelerador. REFERENCIA SX71571, SX70623, HSTE, NEROCSPK. https://www.sielnet.com/products/rebreathers/ o similar, 2, EA; LI 010: VHF submarine communication system . The integrated diver voice communication system shall allow diver-to-diver and diver-to-surface voice communications with combined VHF radio and ultrasonic links. It must allow voice communication on the surface through VHF radio link. It must allow integration with underwater communication through ultrasonic acoustic link. It must allow a VHF range of up to 8,000 meters via radio link and 1,000 meters of underwater communication distance. It must have a laryngometer to be used with any type of mask (half or full face mask), and from the surface without a mask. Must allow earphones/laryngophones to operate with a half or full mask or without a mask on the surface. It must have a frequency range of 136 ÷ 162 MHz. It must have 8 channels. Must have a RF output power of 1 to 6 watts. Must have a NI-MH battery with built-in recharge control circuit. Must have ability to program VHF frequencies. Must include training in correct use. Must include jacket for use with communications equipment Must have USB FREQUENCY PROGRAMMING KIT. It must allow configuring the different frequencies for use in military operations. Must have USB cable. Must have PC software. Must have transport and storage box. REFERENCES PN6884-00, PN6802-00, PN6755-33, PN6755-31, PN7241-00, JMU-I-02 or similar // Sistema de comunicación submarina VHF . El sistema integrado de comunicación de voz para buzos deberá permitir las comunicaciones de voz de buceador a buceador y de buceador a superficie con enlaces combinados de radio VHF y ultrasónicos. Debe permitir la comunicación de voz en la superficie a través de un enlace de radio VHF. Debe permitir la integración con la comunicación subacuática a través del enlace acústico ultrasónico. Debe permitir un alcance VHF de hasta 8.000 metros por enlace de radio y 1.000 metros de distancia de comunicación submarina. Debe disponer de un laringómetro para ser utilizado con cualquier tipo de máscara (media máscara o máscara completa), y desde la superficie sin máscara. Debe permitir que los auriculares/laringófonos funcionen con media máscara o máscara completa o sin máscara en la superficie. Debe tener un rango de frecuencia de 136 ÷ 162 MHz. Debe tener 8 canales. Debe tener una potencia de salida de RF de 1 a 6 vatios. Debe tener una batería NI-MH con circuito de control de recarga incorporado. Debe tener capacidad para programar frecuencias VHF. Debe incluir una formación para su correcta utilización. Debe incluir chaqueta para su uso con equipos de comunicaciones Debe tener KIT DE PROGRAMACIÓN DE FRECUENCIAS USB. Debe permitir configurar las diferentes frecuencias para su uso en operaciones militares. Debe contar con cable USB. Debe tener software para PC. Debe tener caja de transporte y almacenamiento. REFERENCIAS PN6884-00, PN6802-00, PN6755-33, PN6755-31, PN7241-00, JMU-I-02 o similar, 4, EA; LI 011: Submarine communication system of ultrasonic transceiver, The Ultrasonic Transceiver System shall have automatic electronic switching capability that allows the diver full control of underwater functions, Separate volume controls for audio reception and monitoring, Voice Activated (VOX) and Push to Talk ( PTT), 8 Multiple Channels and Heavy Duty Heavy Duty Housing, The ultrasonic transceivers system must have a nominal range of more than 1000 meters, It must have an acoustic output power: 5Watts (178.2 dB re 1 mPA at 1 meter), The audio frequency response should be in the range of 300-4000 Hz, Transmitter activation must be voice operated (VOX) or manual activation (PTT), Battery type: n°8 Alkaline Batteries or 12 V NiMH 10-cell AA (2800 mAh) rechargeable battery pack (included), Must have Piezoelectric type transducer, headphones, laryngometer and hood, Must be able to reach a maximum depth: 150m, Housing Dimensions: Height: 7.60”, Width: 3.55”, Depth: 1.80” , Low battery indication: red LED on the top case, Connector Type: Gold Plated Semi-Hard Naval Bronze Connectors. REFERENCES, PN7528-00-A, PN7200-00, PN6801- 00 or similar // Sistema de comunicación Submarina de transceptor ultrasonico, El Sistema de Tranceptors ultrasónicos deben tener la capacidad de conmutación electrónica automática que permite al buceador un control total de las funciones bajo el agua, Controles de volumen separados para recepción y monitoreo de audio, Activación por voz (VOX) y Pulsar para hablar (PTT), 8 Canales múltiples y Carcaza rsistente para trabajo duro. El sistema de Tranceptors ultrasónicos deben tener un alcance de Más de 1000 metros nominales. Debe tener una potencia de salida acústica: 5Watts (178,2 dB re 1 mPA a 1 metro), Su respuesta de frecuencia de audio debe estar en el rango de 300-4000 Hz, La activación del transmisordebe ser operado por voz (VOX) o activación manual (PTT), Tipo de batería: n°8 Pilas Alcalinas (no incluidas) o Paquete de batería recargable de 12 V NiMH de 10 celdas AA (2800 mAh), Debe poseer transductor de tipo Piezoeléctrico, audífonos, laringómetro y caperuza, Debe ser capaz de alcanzar una profundidad máxima: 150m, Dimensiones de Housing : Alto: 7.60”, Ancho: 3.55”, Profundidad: 1.80”, Indicación de batería baja: LED rojo en la carcasa superior, Tipo de conector:Conectores de bronce naval semiendurecidos, chapados en oro REFERENCIAS, PN7528-00-A, PN7200-00, PN6801-00, o similar, 14, EA; LI 012: Submarine surface console system for VHF and underwater communications, Must have communications console that is for DUPLEX (dual) use with military operators, for UW and VHF communications,REFERENCE PN7527-00-A or similar // Sistema de consola submarina de superficie para comunicaciones VHF y subacuáticas, Debe poseer consola de comunicaciones que sea de uso DUPLEX( dual) con operadores militares, para comunicaciones UW y VHF REFERENCIA PN7527-00-A o similar, 1, EA; LI 013: Accessory for secure communication. DIt must have a system that allows communication between two divers through the wired intercom. The wired budy line replaces the ordinary budy line which enables full duplex diver-to-diver underwater voice communication, thus avoiding location in military operations. REFERENCIA PN7466-00 or similar // Accesorio de comunicación Debe poseer un sistema que permita la comunicación entre dos buceadores a través del intercomunicador con cable. La línea budy line por cable reemplaza la línea budy line ordinaria que permite el dúplex completo comunicación de voz submarina de buzo a buzo, lo que evita su localización en operaciones militares.REFERENCIA PN7466-00 o similar, 4, EA; LI 014: REGULATOR 1ST AND 2ND STAGE TAC BLACK “DIN” First stage machined from a block of marine brass that is chrome plated, and later we give it a trivalent treatment to increase its resistance to corrosion, Black finish, Pneumatically compensated diaphragm, DIN connector that can be used with pressures up to 300 bar (4350 psi), Adjustable intermediate pressure, Includes cold or polluted water kit as standard, 4 LP outlets (low pressure). One of them at the top of the rotating turret, 3/8", 2 HP outlets (high pressure), 7/16", Intermediate pressure at 9.7 +/- 0.35 bar (140 +/- 5 psi) 2ND STAGE REGULATOR TAC BLACK Second stage made of chrome-plated marine brass and thermoplastic that provide, Great strength and durability, Pneumatically compensated, Improved Lid Design, Heat exchanger that improves performance in cold waters, Easily replaceable mouthpiece for optimum fit, Venturi control to minimize entry into continuous flow, 80 cm Flex hose, MATTEBLACK REFERENCE TKTDRGTACBBDIN https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/202-regulador-tac-black.html or similar // REGULADOR 1RA Y 2DA ETAPA TAC BLACK “DIN” Primera etapa mecanizada a partir de un bloque de latón marino que es cromado, Y posteriormente le damos un tratamiento trivalente para aumentar su resistencia a la corrosión, Acabado en color negro, Membrana compensada neumáticamente, Conector DIN que puede utilizarse con presiones de hasta 300 bar (4350 psi), Presión intermedia ajustable, Incorpora de serie kit de aguas frías o contaminadas, 4 salidas de LP (baja presión). Una de ellas en la parte superior de la torreta giratoria, de 3/8", 2 salidas HP (alta presión), de 7/16", Presión intermedia a 9,7 +/- 0,35 bar (140 +/- 5 psi) REGULADOR 2DA ETAPA TAC BLACK Segunda etapa fabricada en latón marino cromado y termoplástico que le proporcionan una gran robustez y durabilidad, Compensada neumáticamente, Tapa con diseño mejorado, Intercambiador de calor que mejora el rendimiento en aguas frías, Boquilla fácilmente sustituible para lograr un ajuste óptimo, Control Venturi para minimizar la entrada en flujo contínuo Latiguillo Flex de 80 cm. COLOR NEGRO MATE https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/202-regulador-tac-black.html REFERENCIA TKTDRGTACBBDIN o similar, 22, EA; LI 015: OCTOPUS TAC BLACK REGULATOR, High performance compensated second stage. MATTE BLACK, New cover redesigned to improve performance and appearance, Heat exchanger to improve performance in cold waters, Made of thermoplastic and chrome-plated marine brass that provide great durability, The mouthpiece is easily replaceable for optimum fit, Venturi control, BLACK hose 1 m long. REFERENCE TKTDRGOCTAC https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/257-octopus-proteus- 8435518901310.html or similar // REGULADOR OCTOPUS TAC BLACK Segunda etapa compensada de alto rendimiento. COLOR NEGRO MATE, Nueva cubierta rediseñada para mejorar las prestaciones y su aspecto, Intercambiador de calor para mejorar el rendimiento en aguas frías, Fabricado en termoplástico y latón marino cromado que proporcionan una gran durabilidad, La boquilla es fácilmente sustituible para lograr un ajuste óptimo, Control Venturi, Latiguillo NEGRO de 1 m de longitud, https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas- grifos-accesorios/257-octopus-proteus-8435518901310.html REFERENCIA TKTDRGOCTAC o similar, 22, EA; LI 016: MINI 3 CONSOLE MANOMETER + DEPTH METER + COMPASS, Pressure gauge up to 300 bar with red signaling in the reserve area (last 50 bar). Units: bars, Analog depth gauge up to 80 m with maximum depth indicator needle. Units: Meters, Analog compass located on the back with rotating bezel to mark directions, lateral reading window, faith line engraved on the dial and rose submerged in liquid. 80 cm long compact high pressure hose, black colour. REFERENCIA BRTDACCONMINI3 https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/269-consola-mini-3-manometro- profundimetro-brujula.html or similar // CONSOLA MINI 3 MANOMETRO +PROFUNDIMETRO +BRÚJULA Manómetro de presión hasta 300 bar con señalización roja en la zona de reserva (últimos 50 bar). Unidades: bares, Profundímetro analógico hasta 80 m con aguja indicadora de profundidad máxima. Unidades: Metros, Compas analógicos situado en la parte trasera con Bisel giratorio para marcar rumbos, ventana de lectura lateral, línea de fe grabada sobre el dial y rosa sumergida en líquido, Latiguillo de alta presión compact de 80 cm de longitud. https://tdsdive.com/es/gas-reguladores-manometros-latiguillos-botellas-grifos-accesorios/269-consola-mini-3-manometro- profundimetro-brujula.html REFERENCIA BRTDACCONMINI3 o similar, 22, EA; LI 017: WING TECH 20 L. + STAINLESS STEEL BACKPLATE + HARNESS, Outer bag in CORDURA 1000. Easily replaceable inner tube in break-resistant polyurethane 210 radiofrequency welded, Air capacity: 20 liters, Push capacity: 40.47 lbs, Independent nylon elastics (available without elastics), Grommets for water drainage, Padded straps CORDURA 1000 adjustable by dipping with fastex, 3mm stainless steel plate, Padded plate cover, X01K inflator in technopolymer, 400 or 500 mm corrugated tube in TPE, Internal anti-stretch cable, Overpressure and discharge valves at the top and bottom. REFERENCE TKBC0101GT20DIRTDS https://www.cascoantiguo.com/es/tek/alas-y-jackets/ala-dsi-20-tech-back-plate-inox-arnes-tds or similar // ALA TECH 20 L. + BACKPLATE INOX + ARNÉS Bolsa exterior en CORDURA 1000, Tubo interior fácilmente reemplazable en poliuretano 210 resistente a la rotura soldado a radiofrecuencia, Capacidad de aire: 20 litros, Capacidad de empuje: 40.47 lbs, Elásticos de nylon independientes (disponibles sin elásticos), Ojales para drenaje de agua, Tirantes acolchados CORDURA 1000 ajustables por inmersión con fastex, Placa de acero inoxidable de 3 mm, Cubierta de placa acolchada, Inflador X01K en tecnopolímero, Tubo corrugado de 400 o 500 mm en TPE, Cable interno anti-estiramiento, Válvulas de sobrepresión y descarga en la parte superior e inferior, https://www.cascoantiguo.com/es/tek/alas-y-jackets/ala-dsi-20- tech-back-plate-inox-arnes-tds REFERENCIA TKBC0101GT20DIRTDS o similar, 22, EA; LI 018: DIVE COMPUTER NEON BLACK New system for navigating through the menus and entering parameters for maximum usability and intuitiveness. Remarkable ease of configuration, navigation through the different menus and access to the large amount of information that it provides in a very intuitive way, 12/24 hour clock with calendar and seconds, Precision stopwatch, Alarm clock, High-intensity backlight function (4000 Mlux, more than twice the highest lighting power computers to date) Indication of no-fly time and desaturation time, Low battery indicator, Metric or imperial units, User replaceable battery, MODO OFF para su uso en snorkeling/swimming LOG BOOK with historical memory of 50 dives per modality or 40 hours, Air, Nitrox (EAN), Gauge (Gauge) and Apnea (Free) modes, Very long battery life through a combination of systems: saving mode when the computer is not used with automatic start-up and a new low-consumption processor, CR2450 battery, Interface with connectio...