Inactive Total Small Business Set-Aside (FAR 19.5)

MODIFICATION NOTICE: Bids are being solicited under solicitation number W7G10004. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be i... MODIFICATION NOTICE: Bids are being solicited under solicitation number W7G10004. This announcement constitutes the only solicitation; bids are being requested and a written solicitation will not be issued. The solicitation is issued as a Request for Quote (RFQ), unless otherwise indicated herein.If your company can provide the product/services listed on the solicitation and comply with all of the solicitation instructions, please respond to this notice. To view the specifications, please go to www.UnisonMarketplace.com and reference Buy No. 1070220_01. GSA Schedule Bids Only: Sellers bidding on this opportunity MUST have the items requested on an existing GSA Schedule. The Schedule must either be in the Seller's name or the Seller must be able to document its ability to act as an agent of a partner's Schedule. Sellers must not bid more than their applicable contract ceiling price, excluding the Unison Marketplace Fee, for contract-specific items. If Unison receives notice that, due to inclusion of the Unison Marketplace Fee, the Selected Bid's line item pricing is higher than the Selected Seller's applicable published government contract pricing, the Unison Marketplace Fee will be reduced to ensure the Selected Bid's line item pricing does not exceed the Selected Seller's applicable contract pricing. Sellers may offer Open Market items only in accordance with the approved Terms and Conditions of their respective GSA Schedule AND upon approval from the soliciting Contracting Officer. Information regarding GSA Schedules can be found at www.GSA.gov. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2021-07-12 12:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Pollock, LA 71467 The DOJ BOP Field Offices - FCC POLLOCK requires the following items, Meet or Exceed, to the following: LI 001: Master tool set, Preventative Maintenance Number of Pieces: 181 Case Type 7 Drawer Rolling Impact Resistant Case Measurement Type Inch/Metric Socket Depth Standard & Deep Contents (2) Center Punches 1/4 & 3/8, 5"; (3) Starting Punches 1/16, 3/32 & 1/8, 5"; Aligning Punch, 3/16, 10"; 10" Arc Joint Pliers; 3" Bench Block; Small Parts Box w/17 Compartments; Clip/Socket Rail Combo, 1/2" DR, 11"; Cold Hand Chisel, 1/2x7"; 6, 8, 10" Hand Contents 10" Curved Jaw Locking Pliers; Deep Sockets SAE 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 12pt, 3/8" SQ DR; 8" Diagonal Cutter Pliers; Brass Drift Pins1/4, 4, 3/8, 6, 1/2, 7, 3/4, 8; Drive Pin Punch 3/32 x 5-1/4"; 9" Electrical Connector Pliers; 17" Inspection Mi Contents 9" File Brush; M12/A2 Front Adjustment Tool; Safety Glasses; (3) Dead Blow Hammers 4, 5, 20oz; 16oz Ball Peen Hammer; 12pc Swiss Pattern Needle File Set, #0; LED Flexible Flashlight; (2) 6 & 6-3/4" Long Nose Locking Pliers; Magnetic Retrieving Tool; Multi Contents Hex Bit Sockets 3/16, 7/32, 1/4, 5/16, 3/8, 3/8" SQ DR;1/2 & 9/16, 1/2" SQ DR; Ball End Hex Key Set, .05 to 3/8; Ball End Hex Key Set, Metric, 1.5 to 10; Hinged Ratchets 3/8 & 1/2" SQ DR; Machinists Rule, 6", 1/10 & 1/100; 12' Measuring Tape; Multimeter Contents Offset Ratcheting, #2 Cross Tip, 1/4" Flat Tip, 1/4" DR; Double Open End Wrench, 15 & 60 Degree, 1-3/8"; Open End Wrench, 1/2 x 9/16, 3/8 x 7/16, 5/8 x 11/16; Padlock; 12pc Ball End Pin Punch Set; 8" Putty Knife; Ratchet, 1/2" SQ DR; 16" Rolling Head Pry Contents 10-1/2" Sash Brush; 6-3/4" Slip Joint Pliers; .07 Snap Ring Pliers; 1/4" SQ DR to 3/8" SQ Dr Socket Wrench Adapter; Speeder Socket Wrench, 1/4" SQ DR; Screwdriver Type Socket Wrench, 1/4" SQ DR; Thickness Gage w/32 Blades; Torx Bit Set: T27, T30, T40, T45 Contents Combination Wrenches, Box & Open End 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1; Combination Wrenches, Box & Open End 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22 Contents Socket Wrench Extensions: 1/4 x 6, 3/8 x 3, 1/2 x 10, 1/2 x 5, 1/4 x 2, 3/8 x 6; Sockets Metric: 10-11, 12pt, 3/8" DR, 12-19, 21, 22, 24, 12pt, 1/2" DR, 5-7, 10, 12pt, 1/4" DR; 4-1/2" Tweezers; Universal Joints, 1/4, 3/8, 1/2 SQ DR; 12" Adjustable Wrench Contents Sockets SAE: 1/2-1, 12pt, 1/2" SQ DR, 3/16-3/8, 12pt, 1/4" SQ DR, 3/8, 7/16, 12pt, 3/8 SQ DR; 12" Wire Twister Pliers; 11" Clip/Socket Rail Combo, 3/8" DR; Ratcheting Screwdriver & Bit, 1/4" DR; Ratchets, 1/4 & 3/8" SQ DR; Spanner Wrench, 3/4 to 2", 5, EA; Solicitation and Buy Attachments ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOJ BOP Field Offices - FCC POLLOCK intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. A Seller may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOJ BOP Field Offices - FCC POLLOCK is taking this action in an effort to improve both seller access and awareness of requests and the agency's ability to gather multiple, completed, real-time bids.All responsible Sellers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com.Sellers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Sellers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Sellers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process.Should Sellers require additional clarification, contact Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com. Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid individual pricing for all required line items in order to be considered for award (i.e., Do not use the ?Included in another line item? function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ?Submit a Question? feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid being determined to be non-responsive. New Equipment ONLY; NO remanufactured or "gray market" items. All items must be covered by the manufacturer's warranty. Bid MUST be good for 30 calendar days after close of Buy. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. ORCA Requirement - Company must be registered on Online Representations and Certifications Application (ORCA) before an award could be made to them. If company is not registered with ORCA, they may do so by going to ORCA web site at https://orca.bpn.gov/. No partial shipments are permitted unless specifically authorized at the time of award. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). Award Criteria-An award will be made to a responsive offeror (who submits all required submissions on time), whose past performance does not pose a risk to the Government, and whose offer is the Lowest Price Technically Acceptable (LPTA). An offer is technically acceptable if its technical capabilities conform to the Government's Statement of Work or listed specs whichever is applicable to the buy. Supplemental Bid Information In addition to providing pricing at www.FedBid.com for this solicitation, each Offeror must provide any required, NON-PRICING responses (e.g. technical proposal, representations and certifications, etc.) so that they are received no later than the closing date and time for this solicitation. Submissions can be sent to clientservices@fedbid.com. For Exact Match Only Commodity Buys- NO SUBSTITUTIONS, EXACT MATCH ONLY. The vendor may not substitute any item/service listed on this order without prior written approval from the DHS/CBP Contracting Officer. No other individual is authorized, either verbally or in writing to change part numbers, manufacturer, quantity, delivery dates, or any other specifications of this RFQ. Items/services that do not conform to descriptions and part numbers found in this RFQ will be rejected at the time of delivery causing a return at the vendor's expense. For Exact Match Services Buys Only- In order for a sellers bid to be 'responsive' and considered for award, the seller is REQUIRED to document exactly how they intend to meet the requirements of the SOW. They shall document statement detailing the service for evaluation. Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. For all buys other than Exact Match Sellers MUST document what they are bidding for evaluation for award. Sellers must include, extended specs and/or manufacturer name and part numbers (if applicable). Failure to do this may be cause for termination. This information is REQUIRED in order for a sellers bid to be deemed 'responsive' and to be considered for award. FAR 52.211-6 To be considered for award, all Sellers must be manufacturer/ Federally authorized distributors of the equipment/services they are offering with a demonstrated capability of delivering the entire order within the time frames specified by the Buyer on the award. Sellers may be required to provide documentation as proof of authorization to be considered for award.