Inactive Total Small Business Set-Aside (FAR 19.5)

8/29/2023: Abstract of Offers published in the attachments section. 8/18/2023: Amendment 0002 issued. This amendment updates the Wage Determination to CO20230001, Modification 8, dated 08/04/2023. See... 8/29/2023: Abstract of Offers published in the attachments section. 8/18/2023: Amendment 0002 issued. This amendment updates the Wage Determination to CO20230001, Modification 8, dated 08/04/2023. See attachments for complete details. Bid Opening Date: Tuesday, August 29 at 1:15 PM CST. 08/14/2023: Amendment 0001 issued. This amendment incorporates the pre-bid site visit meeting minutes, questions and answers, and photos and staging diagram. See attachments for complete details. Bid Opening Date: Tuesday, August 29 at 1:15 PM CST. 07/13/2023: The Federal Bureau of Prisons (FBOP) herein issues solicitation 15BFA023B000000024 for the award of a firm-fixed-price construction contract for a project entitled Replace Complex Roofs, at the Federal Correctional Complex (FCC) Florence, located in Florence, Colorado. FCC Florence is a federally owned facility located at 5880 State Highway 67 South, Florence, CO 81226. The project consists of the following: The Federal Correctional Complex (FCC) Florence Colorado has a requirement for a new roofing system to be installed. The existing roofs at the FPC, FCI, ADX are a fully ballasted EPDM roof that is 27 years old and has exceeded its useful life. The selected contractor is responsible for providing all labor, material, tools, equipment, warranty, and supervision necessary to remove approximately 410,000 sq. ft. of the current roofing system down to, but not including the metal decking and to install a reinforced TPO (Thermoplastic Polyolefin) Fully Secured, TPO membrane must be secured by a nonmechanical method, Roofing System per manufacture specifications. The new roofing system shall include all materials, equipment, and labor needed to complete the roof system such as but not limited to; flashings, insulation, copings, transitions, proper drainage slope, inspection of decking, sealants, glues, primers, substrate materials, penetration seals, fasteners, fiber boards, gypsum boards, termination bars, metals, and vapor protection as specified herein and as indicated on the drawings in accordance with the manufacturer's most current specifications and details. Additional materials shall be installed per manufacture specifications for proper walkways around roof access points, HVAC equipment, security equipment, and roof edges so that the roofing material is protected from punctures, dents, or tears during maintenance and security checks. See additional specifications in section 07 54 00 Thermoplastic Membrane Roofing. The order of the installation for each institution and building shall be determined by the FBOP. The institutional order shall be from the lowest security level to the highest i.e., FPC, FCI, and then the ADX. The building order will be determined by FBOP during the pre-construction meeting. The FBOP reserves the right to change the installation order at any time. Contractor shall remove the existing razor wire as necessary to complete the work on a daily basis. The Contractor shall return all existing razor wire to its permanent location at the end of each working day for security purposes. Contractor shall coordinate all razor wire removal activities with the Contracting Officer Representative (COR) in advance of work. An assembly letter by the manufacture shall be supplied to the Federal Bureau of Prisons (FBOP) that clearly indicates the new roofing system meets a 20-year, 100 mph wind rating, and two-inch hail protection. Refer to individual specification sections for additional warranty requirements. Access to attachments will require an active https://sam.gov vendor registration (log in). If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. Interested bidders must be registered in the System for Award Management (SAM) at https://sam.gov. Pursuant to Federal Acquisition Regulation (FAR) 36.204, the estimated magnitude of the project is more than $10,000,000. (NOTE: This range is one of eight available ranges from FAR 36.204 and is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range.) The North American Industrial Classification System (NAICS) code applicable to this requirement is 238160 (Roofing Contractors) with a corresponding small business size standard of $19 million. The solicitation is set aside exclusively for small business contractors. The solicitation will be distributed solely through the website at https://sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. IMPORTANT: Any contractor interested in obtaining a contract award with the Federal Bureau of Prisons must be registered in the System for Award Management (SAM) at https://sam.gov. If you have questions about SAM, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.

Inactive Total Small Business Set-Aside (FAR 19.5)

THIS IS A PRE-SOLICITATION SYNOPSIS OF PROPOSED CONTRACT ACTION. THIS IS NOT A SOLICITATION OR INVITATION FOR OFFERORS TO SUBMIT BIDS. THIS NOTICE WILL BE POSTED FOR A MINIMUM OF 15 DAYS PRIOR TO POST... THIS IS A PRE-SOLICITATION SYNOPSIS OF PROPOSED CONTRACT ACTION. THIS IS NOT A SOLICITATION OR INVITATION FOR OFFERORS TO SUBMIT BIDS. THIS NOTICE WILL BE POSTED FOR A MINIMUM OF 15 DAYS PRIOR TO POSTING OF THE SOLICITATION. The Federal Bureau of Prisons (FBOP) anticipates issuance of solicitation 15BFA023B000000024 for the award of a firm-fixed-price construction contract for a project entitled Replace Complex Roofs, at the Federal Correctional Complex (FCC) Florence, located in Florence, Colorado. FCC Florence is a federally owned facility located at 5880 State Highway 67 South, Florence, CO 81226. The project consists of the following: The Federal Correctional Complex (FCC) Florence Colorado has a requirement for a new roofing system to be installed. The existing roofs at the FPC, FCI, ADX are a fully ballasted EPDM roof that is 27 years old and has exceeded its useful life. The selected contractor is responsible for providing all labor, material, tools, equipment, warranty, and supervision necessary to remove approximately 410,000 sq. ft. of the current roofing system down to, but not including the metal decking and to install a reinforced TPO (Thermoplastic Polyolefin) Fully Secured, TPO membrane must be secured by a nonmechanical method, Roofing System per manufacture specifications. The new roofing system shall include all materials, equipment, and labor needed to complete the roof system such as but not limited to; flashings, insulation, copings, transitions, proper drainage slope, inspection of decking, sealants, glues, primers, substrate materials, penetration seals, fasteners, fiber boards, gypsum boards, termination bars, metals, and vapor protection as specified herein and as indicated on the drawings in accordance with the manufacturer's most current specifications and details. Additional materials shall be installed per manufacture specifications for proper walkways around roof access points, HVAC equipment, security equipment, and roof edges so that the roofing material is protected from punctures, dents, or tears during maintenance and security checks. See additional specifications in section 07 54 00 Thermoplastic Membrane Roofing. The order of the installation for each institution and building shall be determined by the FBOP. The institutional order shall be from the lowest security level to the highest i.e., FPC, FCI, and then the ADX. The building order will be determined by FBOP during the pre-construction meeting. The FBOP reserves the right to change the installation order at any time. Contractor shall remove the existing razor wire as necessary to complete the work on a daily basis. The Contractor shall return all existing razor wire to its permanent location at the end of each working day for security purposes. Contractor shall coordinate all razor wire removal activities with the Contracting Officer Representative (COR) in advance of work. An assembly letter by the manufacture shall be supplied to the Federal Bureau of Prisons (FBOP) that clearly indicates the new roofing system meets a 20-year, 100 mph wind rating, and two-inch hail protection. Refer to individual specification sections for additional warranty requirements. The Statement of Work/Specifications attachment included with the solicitation will provide complete requirements for the project. The solicitation will be posted at a later date. Access to the specifications and drawings attachments will require an active https://sam.gov vendor registration (log in). If you encounter problems accessing these documents, please contact the Federal Service Desk at 866-606-8220. Interested bidders must be registered in the System for Award Management (SAM) at https://sam.gov. Pursuant to Federal Acquisition Regulation (FAR) 36.204, the estimated magnitude of the project is more than $10,000,000. (NOTE: This range is one of eight available ranges from FAR 36.204 and is not meant to imply that the project has necessarily been estimated/budgeted to the maximum of the selected range. It merely conveys that the estimate/budget lies somewhere within that range.) The North American Industrial Classification System (NAICS) code applicable to this requirement is 238160 (Roofing Contractors) with a corresponding small business size standard of $19 million. The solicitation will be available approximately July 10, 2023. The solicitation will be distributed solely through the website at https://sam.gov. Hard copies of the solicitation will not be made available. The website provides download instructions. All future information about this solicitation, including any amendments, will also be distributed solely through this website. Interested parties are responsible for continuously monitoring this website to ensure that they have the most recent information about this proposed contract action. This is a 100 percent small business set-aside. In order to qualify for award, your business size metrics information entered in your SAM registration must be less than or equal to the size standard specified above (see provision 52.219-1 in the Representations & Certifications section of your registration and view the table therein listing NAICS codes and your indicated business size relative to the assigned NAICS code above). Each bidder's SAM registration will be reviewed by the Government to confirm that your business size meets the small business size standard requirement. All bidders are urged to double check their SAM registration and update as necessary, including the size metrics information. This synopsis is intended only for those who would be entering into a Prime contract with the FBOP for the entirety of this project. The FBOP does not award subcontracts. Subcontracts (if applicable/necessary) are the responsibility of the Prime contractor. The FBOP has no privity of the contract with subcontractors. IMPORTANT: Any contractor interested in obtaining a contract award with the Federal Bureau of Prisons must be registered in the System for Award Management (SAM) at https://sam.gov. If you have questions about SAM, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.