Inactive

THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY - Solicitations are not available at this time. This notice does not constitute a commitment by the Government. The information gathered from market research... THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY - Solicitations are not available at this time. This notice does not constitute a commitment by the Government. The information gathered from market research will be vital in the formation and set aside status of the solicitation. The Bureau of Prisons has a future requirement for the supplies to repair asphalt at Federal Correctional Institution (FCI) Englewood. The requirement consists of four thousand four hundred (4400) tons of hot mix asphalt, twelve hundred (1200) tons of road base and approximately one thousand (1000) gallons of tack coat. All supplies must meet state required codes. Hot Mix Asphalt - The hot mix asphalt design shall be ½” (SX-75) Hot Mix Asphalt. The contractor will provide asphalt deliveries by 14-25 ton dump trucks to complete delivery. No belly dump will be allowed, only end dump capable of dumping into paving equipment. Usually defined by having small chutes on the back of the dump trucks. Application of the asphalt will be completed using equipment and labor provided by the FBOP (Federal Bureau of Prisons). Delivery of asphalt will be on a “Will Call” order delivered by the contractor to FCI Englewood. Actual round trip may vary for each truck. Trip tickets will be required to verify actual date and time, material description, ticket #, plant ID and quantity of material. Times may vary based on external work and access factors. Asphalt shall leave the plant with a temperature between 290-320 degrees. The asphalt must be placed with a minimum temperature of 250 degrees. Therefore the asphalt plant location shall be locate4d within a 30-40 minute delivery area. The contractor must be capable of supplying up to 200 tons per hour. Road Base – The contractor shall supply 1200 tons of road base. FBOP asphalt crew will retrieve road base from contractor plant location. Tack Coat – The contractor shall supply tack coat. FBOP asphalt crew will retrieve and apply tack coat from contractor. Deliveries will be made to FCI Englewood located in Littleton, Colorado. The Government contemplates awarding of firm fixed priced purchase order resulting from the future solicitation. Further details concerning the required supplies and equipment can be found in the attached draft Specifications. A Government solicitation document is being developed, and a contract may or may not result. Market research is being conducted to determine interest and capability of potential sources for this requirement. All future information about this acquisition, including the solicitation and/or amendments, will be distributed solely through this site. Interested parties are responsible for monitoring this site to ensure that they have the most up-to-date information regarding this acquisition. Please note: All contractors doing business with the Federal Government must be registered in the System for Award Management (SAM) database. The website for registration is www.sam.gov. If you have questions about the System for Award Management (SAM), Government procurements in general, or need assistance in the preparation of your quote, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org. The North American Industry Classification System (NAICS) Code is 324121 Asphalt Paving Mixture and Block Manufacturing (Size Standard: 500 employees). Please answer the following questions on company letterhead: 1. Can your company provide the supplies in compliance with the requirements listed in the draft Specifications? 2. Do you have any issues/questions/concerns with the requirements listed in the draft Specifications? 3. How many calendar days does your firm need to prepare a quotation resulting from this solicitation? 4. How many calendar days does your firm need to complete delivery after receipt of award? 5. Is your company registered, and active, in the System for Award Management (www.sam.gov)? 6. Please furnish the following information in reference to your company: Company Name: DUNS number: Point of Contact: Telephone Number: E-mail Address: I am extremely appreciative of the time you have taken to complete this questionnaire. Please email your response to jfaling@bop.gov.

Inactive Total Small Business Set-Aside (FAR 19.5)

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solic... This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. The solicitation number is 15B40321Q00000002 and is issued as a Request for Quote (RFQ), unless otherwise indicated herein. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2020-08. The associated North American Industrial Classification System (NAICS) code for this procurement is 311615 with a small business size standard of 1,250.00 employees. This requirement is a Small Business Set-Aside and only qualified offerors may submit bids. The solicitation pricing on www.UnisonMarketplace.com will start on the date this solicitation is posted, and, unless otherwise displayed at www.UnisonMarketplace.com, will end on: 2020-09-28 13:30:00.0 Eastern Time. This time supersedes the Offers Due Time listed above. FOB Destination shall be Littleton, CO 80123 The DOJ BOP Field Offices - FCI ENGLEWOOD requires the following items, Meet or Exceed, to the following: LI 001: CHICKEN LEG QUARTERS, BY THE POUND Meats, Chicken, Leg Quarter, Raw, Whole, Ready to Cook, Frozen, IMPS P1031 Broiler Leg, United States Classes, Standards and Grades for Poultry Agricultural Marketing Service (AMS) 70.200 et seq, Unbreaded. "Whole Leg quarter" consists of a poultry thigh and drumstick (attached), with a portion of the back attached. . Delivered amounts of Leg Quarter portions can be random sizing, with the portion size not to be smaller than 10 ounce and not to exceed 20 ounces. Packed in poly bag boxes. All packaging and packing materials must be clean and in new condition. Products produced or labeled with any phrase “under religious exemption” will be refused., 20000, LB; LI 002: CHICKEN, BONELESS/SKINLESS BY THE POUND Meats, Chicken, Boneless, Skinless, Raw, White Meat (Tender or Breast Meat), Frozen, A or B quality per the USDA, United States Classes, Standards and Grades for Poultry Agricultural Marketing Service (AMS) 70.200 et seq. Boneless, skinless breasts must be free of cartilage and fat. Boneless breasts (excluding the attached tenderloin) must be free of tendons. Tendons normally associated with tenderloins are permitted. Tenderloins or boneless, skinless parts must be free of blood clots, bruises, cuts, tears, and holes in the muscle tissue. Slight discolorations and separation of the muscle tissue is permitted on boneless, skinless parts, provided it does not detract from the appearance of the product. Boneless, skinless parts may be diced. The dicing process must result in size-reduced portions of meat that are intact, not mutilated, and with surfaces relatively smooth in appearance. Individual size-reduced portions of meat must be relatively uniform in size and shape, and consistent with the size reduction process. Unbreaded. Packed in poly bag boxes. All packaging and packing materials must be clean and in new condition. . Products produced or labeled with any Phrase “under religious exemption” will be refused., 15000, LB; LI 003: HOT DOGS, 10-1, BY THE POUND Meats, Frankfurters (Hot Dogs), Fully Cooked, Frozen, Turkey or Chicken (or combination thereof), 6 inch, 8:1 or 10:1 Ratio (must specify weight ratio on bid), Skinless, Without non-meat binders and extenders or With non-meat binders and extenders (such as nonfat dry milk, wheat, rice, soy flour, or soy protein concentrate. (IMPS 800, Major Ingredient P or P1 OR CID A-A-20341, Meat Species IV or V, Size A, Ratio 1, Non-meat binders and extenders (a) or (b). The finished product shall not contain more than 30 percent fat or no more than 10 percent added water, or a combination of 40 percent fat and added water. Non-meat binders and extenders may be used up to 3.5 percent or isolated soy protein may be used up to 2 percent in the frankfurters per 9 CFR § 424.21 (c). All ingredients in the product must be listed in the ingredients statement on the label in order of predominance, from highest to lowest amounts in accordance with the USDA Food Safety Inspection Service (FSIS) Standards and Labeling Policy. Manufacturer’s letters will NOT be accepted in lieu of labeling., 1200, LB; LI 004: TURKEY ROAST RAW, BY THE POUND Meats,Turkey, Boneless, Roast, Raw, Natural, Boned Rolled and Tied, netted, roasting pack or other appropriate packaging. Breast meat or breast/thigh meat (8-12 lb each) or whole muscle thigh meat (4-5 lb each). Skin (Maximum) 12.5%. Products produced or labeled with any phrase related to “under religious exemption” will be refused., 4000, LB; Solicitation and Buy Attachments ***Question Submission: Interested Offerers must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted by using the 'Submit a Question' feature at www.UnisonMarketplace.com. Questions not received within a reasonable time prior to close of the solicitation may not be considered.*** For this solicitation, DOJ BOP Field Offices - FCI ENGLEWOOD intends to conduct an online competitive reverse auction to be facilitated by the third-party reverse auction provider, Unison, Inc. Unison Marketplace has developed an online, anonymous, browser based application to conduct the reverse auction. An Offeror may submit a series of pricing bids, which descend in price during the specified period of time for the aforementioned reverse auction. DOJ BOP Field Offices - FCI ENGLEWOOD is taking this action in an effort to improve both vendor access and awareness of requests and the agency's ability to gather multiple, competed, real-time bids. All responsible Offerers that respond to this solicitation MUST submit the pricing portion of their bid using the online exchange located at www.UnisonMarketplace.com. There is no cost to register, review procurement data or make a bid on www.UnisonMarketplace.com. Offerers that are not currently registered to use www.UnisonMarketplace.com should proceed to www.UnisonMarketplace.com to complete their free registration. Offerers that require special considerations or assistance may contact Marketplace Support at 1.877.933.3243 or via email at marketplacesupport@unisonglobal.com. Offerers may not artificially manipulate the price of a transaction on www.UnisonMarketplace.com by any means. It is unacceptable to place bad faith bids, to use decoys in the www.UnisonMarketplace.com process or to collude with the intent or effect of hampering the competitive www.UnisonMarketplace.com process. Should Offerers require additional clarification, notify the point of contact or Marketplace Support at 1.877.933.3243 or marketplacesupport@unisonglobal.com.Use of Unison Marketplace: Buyers and Sellers agree to conduct this transaction through Unison Marketplace in compliance with the Unison Marketplace Terms of Use. Failure to comply with the below terms and conditions may result in offer being determined as non-responsive. This solicitation requires registration with the System for Award Management (SAM) at the time an offer or quotation is submitted, excluding the exceptions outlined in FAR 4.1102(a). Registration information can be found at www.sam.gov. As defined in the Federal Acquisition Regulation (FAR) 2.101, the terms “offer” and “offeror” refer to a response to a solicitation that, if accepted, would bind the submitter to perform the resultant contract. The terms “bid” and “bidder” refer to an offer submitted in response to an Invitation for Bid (IFB). The term “proposal” refers to an offer submitted in response to a Request for Proposal (RFP). The terms “quotation,” “quote,” and “quoter” refer to a non-binding submission in response to a Request for Quotation (RFQ) which is not an offer. The Contracting Officer will indicate elsewhere in this Buy as to whether responses will be evaluated for award based either upon (a) price and pricing factors only (Bids/Quotes) or (b) price and other factors (Proposals/Quotes). All Bids/Proposals/Quotations must conform to the listed specifications or the Statement of Work. If award criteria are based upon (b) price and other factors, the Contracting Officer shall clearly indicate the criteria to be applied elsewhere in this Buy. Q&A -Please submit all questions by using the 'Submit a Question' button. This buy will then be reposted with Q&A based on the questions that come in (if applicable). Unless the Buyer indicates otherwise within a particular line item description, each Seller shall include in its online Bid/Proposal/Quotation individual pricing for all required line items in order to be considered for award (i.e., Do not use the ?Included in another line item? function when pricing each line item). If a line item cannot be separately priced, you must notify the buyer through the FedBid ?Submit a Question? feature regarding which line item(s) should be included in which other line item(s) and request reposting. Failure to comply with this term may result in the Bid/Proposal/Quotation being determined to be unacceptable. If supplying a different case size, ensure the minimum quantity required is met and specify your specific case size. Shipping must be free on board (FOB) destination CONUS (Continental U.S.), which means that the seller must deliver the goods on its conveyance at the destination specified by the buyer, and the seller is responsible for the cost of shipping and risk of loss prior to actual delivery at the specified destination. All deliveries shall be to The Federal Bureau of Prisons Warehouse at FCI Englewood is open Monday thru Thursday from 7:30am-2:30pm. All deliveries are scheduled by appointment only. The vendor will contact the FCI Food Service Department for all deliveries. The point of contact is listed in the Buy Attachment Document labeled " Notice to Offerors" Bid/Offer MUST be good for 60 calendar days after close of Buy, unless otherwise indicated. No partial shipments are permitted unless specifically authorized at the time of award. Delivery will be required 21 days after award. All deliveries shall be to the Federal Bureau of Prisons Food Service Warehouse. No partial shipments are permitted unless specifically authorized at the time of award. This order is a fill-or-kill requirement. Any items not received after 21 days from award are subject to termination. All deliveries shall be to the Federal Bureau of Prisons Food Service Warehouse. 52.212-1 Instructions to Offerors-Commercial Items is incorporated by reference Evaluation-Commercial Items (Oct 2014) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Price and Past Performance. Offeror Representations and Certifications-Commercial Items (Aug 2020) The Offeror shall complete only paragraph (b) of this provision if the Offeror has completed the annual representations and certification electronically in the System for Award Management (SAM) accessed through https://www.sam.gov. If the Offeror has not completed the annual representations and certifications electronically, the Offeror shall complete only paragraphs (c) through (v)) of this provision. FAR 52.212-4 Contract Terms and Conditions -Commercial Items (OCT 2018) is hereby incorporated by reference. Variation in Quantity (Apr 1984) (a) A variation in the quantity of any item called for by this contract will not be accepted unless the variation has been caused by conditions of loading, shipping, or packing, or allowances in manufacturing processes, and then only to the extent, if any, specified in paragraph (b) of this clause. (b) The permissible variation shall be limited to: 10 Percent increase 5 Percent decrease This increase or decrease shall apply to all line items. * Delivery of Excess Quantities (Sept 1989) The Contractor is responsible for the delivery of each item quantity within allowable variations, if any. If the Contractor delivers and the Government receives quantities of any item in excess of the quantity called for (after considering any allowable variation in quantity), such excess quantities will be treated as being delivered for the convenience of the Contractor. The Government may retain such excess quantities up to $250 in value without compensating the Contractor therefor, and the Contractor waives all right, title, or interests therein. Quantities in excess of $250 will, at the option of the Government, either be returned at the Contractor’s expense or retained and paid for by the Government at the contract unit price Availability of Funds (Apr 1984) Funds are not presently available for this contract. The Government’s obligation under this contract is contingent upon the availability of appropriated funds from which payment for contract purposes can be made. No legal liability on the part of the Government for any payment may arise until funds are made available to the Contracting Officer for this contract and until the Contractor receives notice of such availability, to be confirmed in writing by the Contracting Officer