Inactive

The U.S. Coast Guard is looking for sources which would be interested in performing dry-dock repairs for Coast Guard Cutter ABBIE BURGESS. The performance period of this upcoming dockside is 5 May - 1... The U.S. Coast Guard is looking for sources which would be interested in performing dry-dock repairs for Coast Guard Cutter ABBIE BURGESS. The performance period of this upcoming dockside is 5 May - 15 July 2020. It is anticipated requests for quotes will be issued around 7 December 2019 and the contract would be awarded around 6 March 2020. Coast Guard Cutter ABBIE BURGESS is a 175' Coastal Buoy Tender home ported in Rockland, ME. There are approximately 56 work items in the requirement as noted below: D-001 Hull Plating (U/W Body), Inspect D-002 Hull Plating (U/W Body), Ultrasonic Testing O-003 U/W Body, Preserve (100%) O-004 U/W Body, Preserve (Partial - Condition A) O-005 Hull Plating Freeboard, Preserve "100%" O-006 Hull and Structural Plating (General) -10.2-Pound Steel, Renew O-007 Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Renew O-008 Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Renew O-009 Hull And Structural Plating (General) - 20.4-Pound Steel Plate, Renew O-010 Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Renew O-011 Hull and Structural Plating (General) - 7.65- Pound Steel Plate, Renew O-012 Hull And Structural Plating (General) - Cracked Steel Welds, Repairs D-013 Appendages (U/W), Leak Test O-014 Appendages (U/W) - Internal, Preserve D-015 Chain Locker(s), Clean and Inspect D-016 Tanks (Mp Fuel Stowage And Overflow), Clean And Inspect D-017 Voids (Non-Accessible), Leak Test O-018 Voids (Non-Accessible), Internal Surfaces, Preserve D-019 Tanks (MP Fuel Service), Clean and Inspect D-020 Tanks (Hydraulic Oil Stowage And Service), Clean And Inspect D-021 Tanks (Ballast), Clean and Inspect D-022 Tanks (Dirty Oil and Waste), Clean and Inspect D-023 Both Main Diesel Engine Mounts, Renewal D-024 Both Z-Drive Propulsion Trains, Alignment D-025 Z-Drive Propulsion Unit, Renew (Drydock) D-026 Underwater (Speed) Log Transducer(s), Service and Inspect D-027 Sea Valves and Waster Pieces, Overhaul Or Renew D-028 Sea Strainers - Duplex (All Sizes), Overhaul D-029 Sea Bay, Clean and Inspect O-030 Sea Bay, Preserve 100% D-031 Thruster Unit (General), Overhaul D-032 Anchor Windlass, Inspect And Service D-033 Anchor Chain(s) and Ground Tackle, Inspect and Repair O-034 Chain Locker, Preserve 100% D-035 Decks - Exterior (Buoy or Construction Deck), Preserve 100% D-036 Hull Plating Freeboard (Buoy Port Areas), Preserve D-037 Cathodic Protection / Zinc Anodes, Renew D-038 Drydock D-039 Temporary Services, Provide - Cutter D-040 Sea Trial Performance, Support, Provide D-041 Crane Winch DCV, Replace D-042 Single Point Davit Winch, Replace D-043 Thruster Quick Disconnects (QDs), Install D-044 Sw Heat Exchangers; Clean, Inspect And Hydro D-045 Fathometer Transducer, General Maintenance O-046 Anchor Chain and Ground Tackle, Preserve D-047 Anchor(s), Preserve D-048 Oily Water Separator, Replace D-049 Auxiliary Sea Water System Valves, Overhaul Or Renew D-050 Bilges, Preserve D-051 Deck Covering (Interior Wet/Dry), Renew D-052 Handrails and Stanchions, Renew D-053 Watertight Doors and Scuttles (External), Renew D-054 Watertight Hatches (External DC Deck and Below), Renew D-055 Pilothouse Windows, Renew D-056 Fan Coil Units, Cleaning All repairs will take place at the vendor's facility. Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc.... Further if there are no past performance evaluations on file in the Past Performance Information System Retrieval database, contractors should provide a couple past performance references including the following information: contract numbers, project titles, dollar amounts, points of contact and telephone numbers. Replies should be sent by November 12, 2019, 10:00 am Pacific Time to: Andrew.G.Jacobs@uscg.mil Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a presolicitation notice and request for quote will be posted on this website (https://www.fbo.gov/). The NAICS Code is 336611. The small business size standard is less than 1250 employees. Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Service-Disabled Veteran-Owned Small Business Set-Aside" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service disabled veteran owned small businesses. Additionally, regarding FAR 52.219-30 "Notice of Set A-Side For Women-Owned Small Business Concerns...": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States.