Inactive

SOURCES SOUGHT NOTICE: DRYDOCK REPAIRS for the USCGC SCIOTO (WLR 65B). This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it... SOURCES SOUGHT NOTICE: DRYDOCK REPAIRS for the USCGC SCIOTO (WLR 65B). This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exists. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: WORK ITEM 1: Hull Plating (U/W Body), Ultrasonic Testing – Tender; WORK ITEM 2: Hull Plating (U/W Body), Inspect - Tender; WORK ITEM 3: U/W Body, Preserve (100%) - Tender; WORK ITEM 4: Hull Plating Freeboard, Preserve “100%” - Tender; WORK ITEM 5: Hull and Structural Plating - 1/4" Steel Plate, Renew; WORK ITEM 6: Hull And Structural Plating (General) - Degraded Weld (Steel), Repair; WORK ITEM 8: Propulsion Shaft Rope Guards, Inspect ;WORK ITEM 9: Appendages (U/W) - Internal, Preserve - Tender;WORK ITEM 10: Tanks (Mp Fuel Stowage And Overflow), Clean And Inspect – Tender; WORK ITEM 11: Voids (Accessible, Weather Deck Exposed), Inspect- Tender; WORK ITEM 12: Propulsion Shafting, Optical Or Laser Alignment Check;WORK ITEM 13: Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renew;WORK ITEM 14: Propulsion Shafting, Straighten;WORK ITEM 15: Propulsion Shafting, Remove, Inspect, and Reinstall;WORK ITEM 16: Propulsion Shaft Bearings (External), Check Clearances;WORK ITEM 17: Propulsion Shaft Bearings (External), Renew;WORK ITEM 18: Shaft Strut Barrel, Renew;WORK ITEM 19: Stern Tube Interior Surfaces, Preserve 100%;WORK ITEM 20: Propeller, Perform Minor Repairs and Reconditioning ;WORK ITEM 21: Propellers, Remove, Inspect, and Reinstall;WORK ITEM 22: Keel Coolers, Clean, Inspect and Hydro;WORK ITEM 23: Fathometer Transducer, General Maintenance;WORK ITEM 24: Rudder Assembly; Remove, Inspect And Reinstall;WORK ITEM 25: Rudder(s), Preserve (“100%”);WORK ITEM 26: Rudder Stock Bearings Clearances, Check ; WORK ITEM 27: Spuds, Overhaul - Tender;WORK ITEM 28: Spud Wells, Inspect Tender;WORK ITEM 29: Sewage Holding Tank(s), Clean and Inspect - Tender;WORK ITEM 30: Tanks (Potable Water), Preserve “100%” – Tender; WORK ITEM 31: Decks - Exterior, Preserve (“Non-Skid Broadcast Grit” System) – Tender;WORK ITEM 32: Superstructure, Preserve “100%”; WORK ITEM 33: Cathodic Protection / Magnesium Anodes, Renew – Tender; WORK ITEM 34: Drydock – Tender; WORK ITEM 35: Temporary Services, Provide – Tender and Barge; WORK ITEM 36: Sea Trial Performance, Support, Provide; WORK ITEM 37: Hull Plating (U/W Body), Inspect - Barge; WORK ITEM 38: Hull Plating (U/W Body), Ultrasonic Testing – Barge; WORK ITEM 39: U/W Body, Preserve (100%) - Barge; WORK ITEM 40: Hull and Structural Plating - 1/4” Steel Plate, Renew; WORK ITEM 41: Hull And Structural Plating (General) - Degraded Weld (Steel), Repair - Barge; WORK ITEM 42: Appendages (U/W), Leak Test – Barge; WORK ITEM 43: Appendages (U/W) - Internal, Preserve – Barge; WORK ITEM 44: Tanks (MP Fuel Service), Clean and Inspect – Barge; WORK ITEM 45: Keel Coolers, Clean, Inspect and Hydro; WORK ITEM 46: Fathometer Transducer, General Maintenance; WORK ITEM 47: Hull Fittings (Weight Handling Rigging Hardware), Inspect and Test - Barge; WORK ITEM 48: Spuds, Overhaul - Barge; WORK ITEM 49: Spud Wells, Inspect - Barge; WORK ITEM 50: Tanks (Potable Water), Preserve “100%” – Barge; WORK ITEM 51: Decks – Exterior (Buoy or Construction Deck), Preserve 100%; WORK ITEM 52: Cathodic Protection / Magnesium Anodes, Renew – Barge; WORK ITEM 53: Drydock – Barge; WORK ITEM 54: Boat Davit Winch, Shrink Wrap; WORK ITEM 55: Buoy and Cargo Handling Crane, Shrink Wrap; WORK ITEM 56: Spud Well Repair; WORK ITEM 57: Fwd Trim Tank, Preserve; WORK ITEM 58: Ballast Tanks Preserve, Barge; WORK ITEM 59: Lead-Based Paint, 100% Abatement, Perform; WORK ITEM 60: Crane Engine Platform Repair (Barge); WORK ITEM 61: Deck Covering (Interior Wet/Dry), Renew; WORK ITEM 62: Stack Plating Renew; WORK ITEM 63: Sound Powered Phone System, Refurbish; WORK ITEM 63: Keel Coolers, Renew; WORK ITEM 64: Towing Services, Provide; WORK ITEM 65: Towing Bitts, Chocks, and Fairleads, Inspect and Test; WORK ITEM 66: Hull Fittings (Mooring and Towing), Inspect and Test - Barge Anticipated Period of Performance: Anticipated start date on or about 13 APRIL 2020 through 08 JUNE 2020. (Subject to change at the discretion of the Government). The vessels’ homeport is Keokuk, IA. The Geographical Restriction is - Restricted to the Western Rivers of the United States, to a transit distance no greater than 650 (statute) miles from the cutter’s homeport and no open water transits. NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information.**Companies may respond to this Sources Sought Notice via e-mail to: sandra.a.martinez@uscg.mil or via fax to (757) 628-4628 (Attn: Sandra Martinez/C&P2-IBCT) no later than 3 FEBRUARY 2020 at 10:00AM, Eastern Time. **Please provide the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern, HubZone Small Business Concern, Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) or a Small Business Concern. 4. Documentation Verifying Small Business Certification. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. Interested parties should register in the System for Award Management (SAM) which replaced the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov. Failure to submit sufficient detailed information may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation.