Inactive Total Small Business Set-Aside (FAR 19.5)

70Z0G121RPRV16200 ISSUE DATE: 17 AUGUST 2021 Contractor shall provide all personnel, equipment, materials, tools, vehicles, supervision, and other items and services required to perform the following ... 70Z0G121RPRV16200 ISSUE DATE: 17 AUGUST 2021 Contractor shall provide all personnel, equipment, materials, tools, vehicles, supervision, and other items and services required to perform the following work: Scope of work for this project includes extensive repairs at Eaton’s Neck Light, built in 1798, with significant alterations in 1858 and 1868. The project includes repairing brownstone, repointing, specialty coatings, window repairs, lantern repairs, metal work, roofing, electrical repairs, interior abatement, and painting. Electrical work includes removing electrical panel board and providing new panel board with main circuit breaker. A replacement service rated electric meter with main disconnect & overcurrent protective device will be provided. Repairs at vestibule include abatement of asbestos containing material (ACM), including gypsum board at interior walls/ceiling, and floor tiles. Interior finishes will be replaced with moisture resistant gypsum board at walls/ceiling, and vinyl composition tile & base at floor. Wall mounted objects which are abandoned in place and/or not in use will be demolished. The asphalt shingle roofing, self-adhering bituminous membrane & underlayment at vestibule will be demolished and replaced, along with the exterior trim. ACM found in paint/plaster on exterior wall of vestibule will be removed, brickwork will be repointed and coated with a mineral silicate coating to match existing. At the lighthouse interior lead based paint (LBP) was found on the existing cast iron grey spiral stair & stair landings. Dust, dirt, feathers, dead birds, & guano will be removed from stair & stair landings. Stairs will be treated for rust as required to prevent future rusting, then will be primed & painted with an encapsulating sealant. ACM was found on the interior brick walls of the lighthouse window wells. Loose paint/plaster will be removed and the brick will be coated with a mineral silicate coating. All interior masonry at the interior masonry lighthouse tower will be cleaned and coated with a mineral silicate coating. At the exterior of the lighthouse cast iron surfaces, including decks, ladder, landing, railings, cast iron watch deck panels, cast iron cornice, and other exposed iron surfaces will be cleaned, primed and painted. Existing damaged brownstone will be patched and cracks in mortar joints will be repointed. Cast iron windows (5) will be repaired, glass will be re-glazed, rust will be removed, hardware repaired and broken components fixed. At lantern, a replacement copper lightning rod, threaded stainless steel tension rod, and nut will be provided. Cast iron cornice will be repaired. At lantern deck replacement bronze astragals will be provided where existing astragals are bent at windows and existing lantern glazing will be re-glazed. The period of performance for the project is 180 calendar days from issuance of Notice to Proceed. The estimated value of the procurement is between $1,000,000 and $1,500,000. Performance and/or Payment bonds will be required. The Government contemplates the use of a “Best Value” solicitation where award will be made to the responsible Offeror whose offer, conforming to the Request for Proposal, offers the best overall value to the Government, technical factors, past performance, and price factors considered. Solicitation packages will be available on 17 August 2021. The date set for receipt of proposals is 28 September 2021 by 4:00 pm. The applicable North American Industry Classification System (NAICS) code is 236220, Commercial and Institutional Building Construction, with a small business size standard of $39.5 Million. This acquisition is issued pursuant to FAR Part 15 Contracting by Negotiation and is 100% Set-Aside for Small Business concerns. All relevant solicitation documents, including specifications and drawings may be accessed for download beginning on the date of issue at the following site: https://sam.gov. To receive immediate notification of all changes posted electronically, vendors should click on “Register to Receive Notification”. All vendors interested in teaming or subcontracting for this solicitation, should click on “Register as Interested Vendor”. In order to view a list of interested vendors, interested parties should click on “View List of Interested Vendors”. A list of interested vendors is only available by registering electronically for this solicitation. Vendors MUST be registered in the System for Award Management database through https://www.SAM.gov in order to receive a federal government contract.