Inactive

Sources Sought Title: DRYDOCK-REPAIRS- USCGC ANVIL (WLIC 75301) & USCG 68A BARGE (68013) DRYDOCK (DD) Availability Notice Type: Sources Sought The U.S. Coast Guard is looking for sources which would b... Sources Sought Title: DRYDOCK-REPAIRS- USCGC ANVIL (WLIC 75301) & USCG 68A BARGE (68013) DRYDOCK (DD) Availability Notice Type: Sources Sought The U.S. Coast Guard is looking for sources which would be interested in performing DRYDOCK repairs for Coast Guard Cutter ANVIL (WLIC 75301) & USCG 68A BARGE (68013) DD. The performance period of this upcoming DRYDOCK is 12 December 2022 to 21 February 2023. It is anticipated requests for quotes will be issued approximately 25 July 2022 and the contract would be awarded around 21 October 2022. CGC ANVIL is a 75’ Inland Construction Tender home ported in Charleston, SC. There are approximately 84 work items in the requirement and the sampling of work items (tentative list) to be performed is listed as follows: WORK ITEM 1: Hull Plating, Side Scan, Ultrasonic Testing - Tender WORK ITEM 2: Hull Plating, U/W Body, Inspect - Tender WORK ITEM 3: Hull Plating, Freeboard, Ultrasonic Testing - Tender WORK ITEM 4: U/W Body, Preserve, 100 percent - Tender WORK ITEM 5: Hull Plating Freeboard, Preserve, Partial - Tender WORK ITEM 6: Hull Plating Freeboard, Preserve, 100 Percent - Tender WORK ITEM 7: Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Tender WORK ITEM 8: Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew - Tender WORK ITEM 9: Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Tender WORK ITEM 10: Hull and Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Tender WORK ITEM 11: Hull and Structural Plating, General, Cracked Steel Welds, Repairs - Tender WORK ITEM 12: Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Tender WORK ITEM 13: Propulsion Shaft Rope Guards, Inspect WORK ITEM 14: Voids, Non-Accessible, Leak Test - Tender WORK ITEM 15: Voids, Non-Accessible, Internal Surfaces, Preserve WORK ITEM 16: Tanks, MP Fuel Service, Clean and Inspect - Tender WORK ITEM 17: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 18: Propulsion Shafting, Straighten WORK ITEM 19: Propulsion Shafting, Optical or Laser Alignment Check WORK ITEM 20: Propulsion Shaft Seals, Mechanical Clean and Inspect WORK ITEM 21: Propulsion Shaft Bearings, External, Check Clearances WORK ITEM 22: Propulsion Shaft Bearings, External, Renew WORK ITEM 23: Stern Tube Interior Surfaces, Preserve, 100 Percent WORK ITEM 24: Propeller s, Remove, Inspect, and Reinstall WORK ITEM 25: Keel Coolers, Clean, Inspect and Hydro WORK ITEM 26: Fathometer Transducer, Renew – Tender WORK ITEM 27: Vent Ducts, Galley and Pantry Room, All, Commercial Cleaning WORK ITEM 28: Sea Valves and Waster Pieces, Overhaul Or Renew WORK ITEM 29: Sea Strainers, All Sizes, Renew WORK ITEM 30: Rudder Assembly, Remove, Inspect And Reinstall WORK ITEM 31: Rudders, Preserve, 100 Percent WORK ITEM 32: Rudder Stock Bearings Clearances, Check WORK ITEM 33: Hull Fittings (Mooring and Towing), Inspect and Test - Tender WORK ITEM 34: Decks - Exterior, Preserve, Non-Skid Broadcast Grit System WORK ITEM 35: Cathodic Protection, Zinc Anodes, Renew, - Tender WORK ITEM 36: Drydock - Tender WORK ITEM 37: Temporary Services, Provide - Tender WORK ITEM 38: Sea Trial Performance, Support, Provide WORK ITEM 39: Flanking Rudder Foundation, Modification WORK ITEM 40: Boat Davit Winch, Shrink Wrap WORK ITEM 41: Buoy and Cargo Handling Crane, Shrink Wrap WORK ITEM 42: Deck Covering, Interior, Wet and Dry, Renew WORK ITEM 43: Lead Dust, Clean WORK ITEM 44: Lead-Based Paint, Perform Spot Abatement WORK ITEM 45: Hull Plating, Side Scan, Ultrasonic Testing - Barge WORK ITEM 46: Hull Plating, Freeboard, Ultrasonic Testing - Barge WORK ITEM 47: Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Barge WORK ITEM 48: Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew – Barge WORK ITEM 49: Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Barge WORK ITEM 50: Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Barge WORK ITEM 51: Hull And Structural Plating, General, Cracked Steel Welds, Repairs - Barge WORK ITEM 52: Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Barge WORK ITEM 53: Voids, Non-Accessible, Leak Test - Barge WORK ITEM 54: Voids, Non-Accessible, Internal Surfaces, Preserve - Barge WORK ITEM 55: Fathometer Transducer, Renew - Barge WORK ITEM 56: U/W Body, Preserve, 100 percent – Barge WORK ITEM 57: Hull Plating Freeboard, Preserve, Partial - Barge WORK ITEM 58: Hull Plating Freeboard, Preserve, 100 Percent - Barge WORK ITEM 59: Cathodic Protection, Zinc Anodes, Renew - Barge WORK ITEM 60: Drydock - Barge WORK ITEM 61: Temporary Services, Provide - Barge WORK ITEM 62: Sea Valves and Waster Pieces, Overhaul Or Renew - Barge WORK ITEM 63: Sea Strainers, Duplex, All Sizes, Renew – Barge WORK ITEM 64: Spuds, Renew - Barge WORK ITEM 65: Spud Wells, Preserve - Barge WORK ITEM 66: Spud Wells, Inspect - Barge WORK ITEM 67: Decks – Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 68: Plating, Bulwark, Repair WORK ITEM 69: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 70: Main Hold Hatch, Renew WORK ITEM 71: Hull Plating, Repair (Barge and Tender) WORK ITEM 72: Barge Fuel Fill Piping, Renew WORK ITEM 73: Compartment Insulation (General), Renew WORK ITEM 74: Deck Plates, Renew Companies which would be interested in submitting a proposal for this requirement should reply to this sources sought notice noting their business size status such as large business, small business, HUBZone, Service-Disabled Veteran-owned, Women Owned Small Business etc…. Replies should be sent by 30 June 2022, 2:00 pm Eastern Standard Time to: Patrick.D.Brown@uscg.mil Shortly after receiving responses the Coast Guard will determine if this requirement will be set aside or unrestricted. After the determination a combined synopsis/solicitation will be posted on this website (https://www.fbo.gov/). The NAICS Code is 336611. The small business size standard is less than 1250 employees. Contractors are reminded that in the case of a HUB Zone set-aside, FAR 52.219-3, "Notice of HUBZone Set-Aside or Sole Source Award" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other HUBZone small businesses. Contractors are also reminded that in the case of a Service-Disabled Veteran-Owned Small Business Set-Aside, FAR 52.219-27, "Notice of Service-Disabled Veteran-Owned Small Business Set-Aside" would apply which requires that at least 50 percent of the cost of personnel for contract performance be spent for employees of the concern or employees of other service disabled veteran owned small businesses. Additionally, regarding FAR 52.219-30 "Notice of Set A-Side For Women-Owned Small Business Concerns…": A women-owned small business (WOSB) concern eligible under the WOSB Program, means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. Primary Point of Contact: Patrick Brown, Patrick.D.Brown@uscg.mil Phone: (757) 628-4588