Inactive Total Small Business Set-Aside (FAR 19.5)

USCGC SEQUOIA (WLB 215) SPECIFICATION FOR FABRICATION OF WATERTIGHT AND NON-WATERTIGHT DOORS, HATCHES, AND SCUTTLES FY2023 CONSOLIDATED LIST OF REFERENCES The below-listed documents form a part of thi... USCGC SEQUOIA (WLB 215) SPECIFICATION FOR FABRICATION OF WATERTIGHT AND NON-WATERTIGHT DOORS, HATCHES, AND SCUTTLES FY2023 CONSOLIDATED LIST OF REFERENCES The below-listed documents form a part of this specification to the extent specified herein. Approval/publication dates or revision dates/numbers are also identified, to ensure that same document versions are used at the time of specification writing and during contract execution. All Coast guard drawings, technical publications, and standard specifications will be provided to contractors by the Coast Guard at an appropriate time, or upon request, free of charge. Other Government documents may be accessed – free of charge – from links located on the SFLC website. Commercial sites provide access to their respective documents. COAST GUARD DRAWINGS Coast Guard Drawing 225-WLB-167-001, rev W; Structural Closures COAST GUARD PUBLICATIONS Coast Guard Commandant Instruction (COMDTINST) M10360.3, Jun 2006, Coatings and Colors Manual Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures OTHER REFERENCES Code of Federal Regulations (CFR) Title 29, Part 1915, Occupational Safety and Health Standards for Shipyard Employment Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning NAVSEA Technical Publication T9074-AD-GIB-010/1688, (TP 1688), July 2012, Requirements for Fabrication, Welding, and Inspection of Submarine Structure The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 5 (Rev-0) WORK ITEM 1: Fabrication of Watertight and Non-Watertight Doors, Hatches, and Scuttles 1. SCOPE 1.1 Intent. This work item describes the requirements for the Contractor to fabricate watertight and non-water tight doors, hatches, and scuttles identified in Table 1 in accordance with drawings and references. TABLE 1 - WATERTIGHT DOORS AND SCUTTLE LOCATIONS Description Location P/N and Description QTY Drawing Watertight Hatch 01-103-2 Deck Gear STRM 01-56-0-D 17 Watertight Hatch - 30”x 30” Clear Opening (C.O.), Raised, 8 dogs, with 21” C.O. watertight scuttle. 01 Each 225-WLB-167-001 Watertight Door 1-57-2 Buoy Deck 1-57-2-L 27 Watertight Door - 36” x 66”, quick acting, Left Hand, 10 Dog, W/Hasp and Staple, 9” diameter (DIA) fixed light, Low type CRES hinges 01 Each 225-WLB-167-001 Watertight Door 1-66-2 Crew Mess 1-66-0-L 14 Watertight Door - 36”x 66”, quick acting, Right Hand, 10 Dog, W/Hasp and Staple, 9” DIA fixed light, Low type CRES hinges 01 Each 225-WLB-167-001 USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 6 (Rev-0) Watertight Hatch 01-93-0 Passageway 1-92-0-L 2 Watertight Hatch – 36” x 72” C.O. (spring assisted), Raised, Individually dogged, W/25” DIA C.O. Quick Acting Watertight Scuttle 01 Each 225-WLB-167-001 Weathertight Door 03-62-2 Pilot House (Port) 03-56-0-C 21 Weathertight Door – 26” x 66” C.O., Left Hand. W/14” x 18” C.O. Window, W/Lever Type Knobs and Mortise Locks 01 Each 225-WLB-167-001 Weathertight Door 03-62-1 Pilot House (Starboard) 03-56-0-C 22 Weathertight Door – 26” x 66” C.O., Right Hand. W/14” x 18” C.O. Window, W/Lever Type Knobs and Mortise Locks 01 Each 225-WLB-167-001 Watertight Hatch 1-61-2 Passageway 2-57-0-L 2 Watertight Hatch – 36” x 72” C.O. (spring assisted), Raised, Individually dogged, W/25” DIA C.O. Quick Acting Watertight Scuttle 01 Each 225-WLB-167-001 Weathertight Door 1-25-2 ATON Shop 1-21-2-Q 11 Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9” 01 Each 225-WLB-167-001 USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 7 (Rev-0) DIA Fixed Light Weathertight Door 01-67-4 PFD Locker 01-66-2-L 10 Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9” DIA Fixed Light, Low Level CRES Hinges 01 Each 225-WLB-167-001 Weathertight Door 02-77-4 PFD Locker 02-75-2-Q 19 Weathertight Door – 26” x 66” C.O., Left Hand. W/Hasp and Staple 01 Each 225-WLB-167-001 Watertight Door 1-25-1 1-21-1-L 10 Weathertight Door – 26” x 66” C.O., Left Hand, W/Hasp and Staple, and 9” DIA Fixed Light, Low Level CRES Hinges 01 Each 225-WLB-167-001 Weathertight Door 02-90-1 Incinerator Room 02-85-0-Q 20 Weathertight Door – 26” x 66” C.O., Right Hand. W/Hasp and Staple 01 Each 225-WLB-167-001 1.2 Government-furnished property None 2. REFERENCES COAST GUARD DRAWINGS Coast Guard Drawing 225-WLB-167-001, rev W; Structural Closures COAST GUARD PUBLICATIONS Surface Forces Logistics Center Standard Specification 0000 (SFLC Std Spec 0000), 2020, General Requirements USCGC SEQUOIA (WLB-215) DRYDOCK AVAILABILITY FY2023 8 (Rev-0) Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes Surface Forces Logistics Center Standard Specification 6310 (SFLC Std Spec 6310), 2020, Requirements for Preservation of Ship Structures OTHER REFERENCES Commercial Item Description (CID) A-A-59316, 2016, Abrasive Materials; for Blasting Military Specification MIL-A-22262B, March 1996, Abrasive Blasting Media Ship Hull Blast Cleaning The Society for Protective Coatings (SSPC)/NACE International (NACE) 2007, Joint Surface Preparation Standard SSPC-SP 10/NACE No. 2, Near-White Metal Blast Cleaning The Society for Protective Coatings (SSPC) Surface Preparation Standard No. 11 (SSPC-SP 11), 2013, Power-Tool Cleaning to Bare Metal 3. REQUIREMENTS 3.1 General. 3.1.1 CIR. None. 3.1.2 Tech Rep. Not applicable. 3.1.3 Protective measures. Not Applicable 3.1.4 Interferences. Not Applicable 3.1.5 Testing. All testing to be completed in accordance with drawings and Surface Forces Logistics Center Standard Specification 0740 (SFLC Std Spec 0740), 2020, Welding and Allied Processes 3.1.6 Shipping. Contractor shall construct container to ship doors and hatches and must include pricing for shipping to CGC SEQUOIA, CO LT Clara Ashton and CWO Michael Scalia, Surface Forces Logistics Command, 2401 Hawkins Point Road, Baltimore, MD, 21226-1797, Building 58.