USCGC VISE (WLIC-75B) DRYDOCK REPAIR FY2022
SOURCES SOUGHT NOTICE - USCGC VISE (WLIC-75B) DRYDOCK REPAIR FY2022 -BETA SAM NO: 70Z085-22-R-P4501700. ***SEE ATTACHED FOR FULL TEXT NOTICE*** This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATIO... SOURCES SOUGHT NOTICE - USCGC VISE (WLIC-75B) DRYDOCK REPAIR FY2022 -BETA SAM NO: 70Z085-22-R-P4501700. ***SEE ATTACHED FOR FULL TEXT NOTICE*** This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; this notice is pursuant to FAR Part 10 (Market Research) and the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. The applicable NAICS Code is 336611, Ship Building and Repairing, and the size standard is 1,250 employees. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Forces Logistics Center, and Alameda, CA to identify sources capable of providing the following: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter, USCGC VISE (WLIC-75305) and Barge (68012) is a 75 Foot WLIC Inland Construction Tender ANTICIPATED NAICS CODE/SIZE STANDARD: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,250 employees. PLACE OF PERFORMANCE: Contractors Shipyard DESCRIPTION OF WORK: Contractor shall provide all necessary labor, materials, services, equipment, supplies, power, accessories, special tools and such other things as are necessary to perform DRYDOCK maintenance to the U.S. Coast Guard Cutter. Description: work includes approximately, but is not limited to 92 Work Items including: steel repair, tank cleaning and inspection, ventilation cleaning and inspection, servicing machinery, insulation replacement, steel preservation, and deck repair. The scope of the acquisition is overhaul, renew, and repair various items. D-001 Hull Plating, Side Scan, Ultrasonic Testing - Tender D-002 Hull Plating, U/W Body, Inspect - Tender D-003 Hull Plating, Freeboard, Ultrasonic Testing - Tender D-004 U/W Body, Preserve (100%) - Tender O-005 Hull Plating Freeboard, Preserve, Partial - Tender O-006 Hull Plating Freeboard, Preserve, 100 Percent - Tender O-007 Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Tender O-008 Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew - Tender O-009 Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Tender O-010 Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Tender O-011 Hull And Structural Plating, General, Cracked Steel Welds, Repairs - Tender O-012 Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Tender D-013 Propulsion Shaft Rope Guards, Inspect D-014 Voids, Non-Accessible, Leak Test - Tender O-015 Voids, Non-Accessible, Internal Surfaces, Preserve D-016 Tanks, MP Fuel Service, Clean and Inspect - Tender D-017 Propulsion Shafting; Remove, Inspect, and Reinstall O-018 Propulsion Shafting, Straighten D-019 Propulsion Shafting, Optical or Laser Alignment Check D-020 Propulsion Shaft Seals, Mechanical Overhaul and Inflatable Renew D-021 Propulsion Shaft Bearings, External, Check Clearances O-022 Propulsion Shaft Bearings, External, Renew O-023 Stern Tube Interior Surfaces, Preserve, 100 Percent D-024 Propeller s, Remove, Inspect, and Reinstall O-025 Propeller, Minor Repairs and Reconditioning, Perform D-026 Keel Coolers, Clean, Inspect and Hydro D-027 Fathometer Transducer, Renew – Tender D-028 Sea Valves and Waster Pieces, Overhaul Or Renew D-029 Sea Strainers, All Sizes, Renew D-030 Rudder Assembly, Remove, Inspect And Reinstall O-031 Rudders, Preserve, 100 Percent D-032 Rudder Stock Bearings Clearances, Check O-033 Rudder Stock Housing, Lower, Renew O-034 Rudder Stock Housing, Upper, Renew D-035 Grey Water Piping, Clean and Flush O-036 Tanks, Fuel, Preserve, 100 Percent - Tender O-037 Tanks, Fuel, Preserve, Partial, - Tender D-038 Decks - Exterior, Preserve (“Non-Skid Broadcast Grit” System) D-039 Cathodic Protection, Zinc Anodes, Renew, - Tender D-040 Drydock - Tender D-041 Temporary Services, Provide - Tender D-042 Sea Trial Performance, Support, Provide D-043 Flanking Rudder Foundation, Modification D-044 Buoy and Cargo Handling Crane, Shrink Wrap O-045 Lead Dust, Clean O-046 Lead-Based Paint and Asbestos-Containing Material, Perform Spot Abatement O-047 Gray Water Piping, Renew D-048 Hull Plating, Side Scan, Ultrasonic Testing - Barge D-049 Hull Plating, U/W Body, Inspect - Barge D-050 Hull Plating, Freeboard, Ultrasonic Testing - Barge D-051 U/W Body, Preserve (100%) - Barge O-052 Hull Plating Freeboard, Preserve, Partial - Barge O-053 Hull Plating Freeboard, Preserve, 100 Percent - Barge O-054 Hull and Structural Plating, General, 10.2 lbs. Steel, Renew - Barge O-055 Hull and Structural Plating, General, 12.75 lbs. Steel Plate, Renew - Barge O-056 Hull and Structural Plating, General, 15.3 lbs. Steel Plate, Renew - Barge O-057 Hull And Structural Plating, General, 20.4 lbs. Steel Plate, Renew - Barge O-058 Hull And Structural Plating, General, Cracked Steel Welds, Repairs - Barge O-059 Hull and Structural Plating, General, Degraded Weld, Steel, Repair - Barge D-060 Voids, Non-Accessible, Leak Test O-061 Voids, Non-Accessible, Internal Surfaces, Preserve D-062 Tanks, MP Fuel Service, Clean and Inspect - Barge D-063 Fathometer Transducer, Renew – Barge D-064 Sea Strainers, Duplex, All Sizes, Overhaul D-065 Spuds, Overhaul - Barge O-066 Spud Wells, Preserve - Barge D-067 Spud Winches, Inspect & Service - Barge D-068 Spud Wells, Inspect - Barge O-069 Tanks, MP Fuel Service, Preserve, Partial - Barge D-070 Decks – Exterior (Buoy or Construction Deck), Preserve 100% D-071 Cathodic Protection, Zinc Anodes, Renew, - Barge D-072 Drydock - Barge D-073 Nav Light Panel, Renew. D-074 Trim Tank Ladder, Renew D-075 Scuttles, Repair or Renew D-076 Barge Fuel Tank Vent, Install D-077 Barge Fuel Transfer and Stripping Piping, Renew D-078 Quick Acting WT Door, Repair D-079 HVAC raw water piping, renew D-080 Fuel Piping, Renew D-081 Barge Fuel Transfer Filter, Replace D-082 Deck Covering (Interior Wet/Dry), Renew D-083 Stack Space Repair D-084 Upper Deck Repair D-085 Main Hold Hatch, Renew D-086 AFT Deck Outlet Kickpipe, Renew. D-087 Bulwark Repair D-088 Frame Repair D-089 Gooseneck Ventilation, Renew D-090 Point of Use Potable Water Filters, Install Tender D-091 Diesel Fired Hammer Lead, Preserve D-092 Fan Coil Units, Renew ANTICIPATED PERIOD OF PERFORMANCE: December 06, 2021 through February 15, 2022 (Subject to change at the discretion of the Government). If the company is unable to meet this period of performance, it is incumbent upon the company to propose an alternative 72 calendar day period of performance. SUBMISSION OF INFORMATION: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice, including commercial market information and company information. Companies should also state and affirm thier "positve intent" to provide an offer if the government chooses to issue a future solicitation as a result of this Sources Sought Notice. Companies may respond to this Sources Sought Notice via e-mail to both POC listed in the Beta.Sam.Gov announcement with the following information/documentation: Ou Saephanh @ Ou.T.Saephanh@uscg.gov and Torben Ohlsson @ Torben.O.Ohlsson@uscg.mil no later than 2:00 PM Pacific Time September 4, 2021, with all of the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern; b. HUBZone Small Business Concern; c. Service-Disabled Veteran Owned Small Business Concern (SDVOSBC); d. Veteran Owned Small Business Concern (VOSBC); e. ED Woman Owned Small Business Concern (EDWOSB); f. Woman Owned Small Business Concern (WOSBC); g. Small Business Concern; h. Large Business Concern 4. Documentation Verifying Small Business Certification: Please provide the following documentation as it applies to your company. a. If claiming 8(a) status, provide a copy of your 8(a) Certificate from SBA. b. If claiming HUBZone status, provide a copy of your HUBZone Certificate from SBA. c. If claiming SDVOSB status, provide documentation that shows the Service Disable Veteran (SDV) unconditionally owns 51 % of the business, controls the management and daily operations, and holds the highest officer position in the company. Documentation should also be provided to show that the SDV has a service-connected disability that has been determined by the Department of Defense or Department of Veteran Affairs. Finally, provide documentation that shows the business is small under the NAICS code 336611. d. If claiming VOSB status, provide documentation that shows the Veteran unconditionally owns 51% of the business, controls the management and daily operation, make long-term decisions for the business, and holds the highest officer position in the company that works at the business fulltime during normal working hours. The documentation should also show the business is small under the NAICS code 336611. e. If claiming EDWOSB status, provide documentation that shows the company is at least 51% owned by one or more women who are "economically disadvantaged", and primarily managed by an economically disadvantaged woman that make long-term decisions for the business, hold the highest officer position in the business and work at the business full-time during normal working hours. The documentation should also show the business is small under the NAICS code 336611. A woman is presumed economically disadvantaged if she has a personal net worth of less than $750,000 (with some exclusions), her adjusted gross yearly income averaged over the three years preceding the certification less than $350,000, and the fair market value of all her assets is less than $6 million. f. If claiming Woman Owned Small Business (WOSB) status, provide documentation that shows the company is at least 51% owned and controlled by one or more women, and primarily managed by one or more women that make long-term decisions for the business and hold the highest officer position in the business and work at the business full time during normal working hours. The women must be U.S. citizens. The documentation should also show the business is small under the NAICS code 336611. g. If claiming Small Business status, provide documentation to show the business is small under NAICS code 336611. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business and submit an offer as a Joint Venture or similar type of teaming agreement, they are requested to provide past performance information on projects of similar scope that they have performed together as a Joint Venture, if available. Providing individual past performance documentation from each company on separate projects where the two did not work together may be considered less relevant. SAM: Interested parties should register at the System for Award Management (SAM) website as prescribed in FAR Clause 52.204-7 System for Award Management (OCT 2018). SAM can be obtained by accessing the internet at https://www.sam.gov/SAM/ or by calling 1-866-606-8220. Disclaimer and Important Notes: This Sources Sought Notice is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Failure to respond or submit information in sufficient detail may result in a company not being considered a likely offeror when making a decision on whether or how to set aside a solicitation for restricted competition. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. At this time no solicitation exists; therefore, Do Not Request a Copy of the Solicitation. After a review of the responses received, a pre-solicitation notice and solicitation may be published on Contract Opportunities (formerly FedBizOpps) the website https://beta.sam.gov/. It is the potential offeror's responsibility to monitor Contract Opportunities for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.
Links ()
Attachments ()
Data sourced from SAM.gov.
View Official Posting »