Inactive

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 3040-21-914-8764 CYLINDER ASSEMEBLY ACTUATING LINEAR MFG:... The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 3040-21-914-8764 CYLINDER ASSEMEBLY ACTUATING LINEAR MFG: KOBELT MFG CO END USE: WPB CLASS CUTTER Part number: 7080-B16 Quantity: 12 EACH **FOB DESTINATION PRICING** **PACKAGED IN HEAVY DUTY SCREWED WOODEN CRATE SUITABLE FOR MULTIPLE SHIPMENTS The items are used on various US Coast Guard vessels. All items will be individually packaged and bar-code in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room bldg 88A Required delivery date no later than: DEC 05, 2022 Subsititute parts are not acceptable. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Government’s belief that KOBELT MFG CO and/or their authorized distributors can obtain the required OEM parts. Concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (02) calendar days from the day this notice is posted. The data must include sufficient detail to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor and verifying the OEM will supply OEM genuine OEM parts. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2022-06 (MAY 2022) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333613 and the business size standard is 500. The resultant chase order will be awarded using simplified acquisition procedures in accordance with FAR 13 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. The Coast Guard intends to award on a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is AUGUST 05, 2022, at 10:00 AM/Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (June 2020); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (December 2016) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (OCT 2020); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (OCT 2020). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)52.212-5 are applicable: FAR 44), FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf PREPARATION FOR DELIVERY All material shipped to the U.S. Coast Guard Surface Forces Logistics Center must be accompanied by an itemized packing list securely attached to the outside of the package. All packing lists shall cite the Purchase Order Number (when issued after award) with the package in such a manner as to provide identification. Material shall be packed for shipment in such a manner as to afford adequate protection to the item against corrosion, deterioration, and physical damage during shipment from the supply source to Surface Forces Logistic Center locations. Package shall also provide adequate protection for warehouse storage and multiple shipments. All packages shall have the Purchase Order Number, Stock Number, Vendor name, and Part Number clearly marked on the exterior of the package. **All deliveries are to be made Monday through Friday between the hours of 7:00 A.M. and 1:00 P.M., EST. ** Note: FOB Destination pricing is preferred; however, if you decide to quote FOB Origin, please use the following instructions: FAR Clause 52.247-65 FOB Origin, Prepaid Freight – Small Package Shipments is included by reference. Shipments – FOB Origin: You are hereby authorized to prepay transportation charges under this order provided that the cost of such transportation does not exceed $250.00. The actual cost of transportation charges, not to exceed the above amount, shall be added to your invoice as a separate line item. Receipted freight bills are not required for transportation charges less than $100.00. Freight charges for more than $100.00 shall be supported by paid freight, express, or parcel post receipts. In the event that the transportation charges will exceed $250.00, you are required to contact the Coast Guard Traffic Section to obtain a Government Bill of Lading ten (10) days prior to shipping. Information to be provided: Purchase Order Number Item identification/description (NMFC item number and classification if possible) Individual and total weight Individual dimensions and total cubic feet Total number of pieces Total dollar value Other pertinent data or special instructions Mail to: Commanding Officer USCG Surface Forces Logistics Center 2401 Hawkins Point Road Attn: Traffic Section Baltimore, MD 21226-5000 Telephone: 410-762-6328/6331 Fax: 410-762-6350 PAYMENT INFORMATION (NON-CREDIT CARD ORDERS) All invoices must contain the following information: contract number, order number, item number, description of supplies or services, quantities, unit prices, extended totals, your DUNS number. Prepaid shipping costs will be indicated as a separate item on the invoice (if applicable). Invoices must be SUBMITTED TO: WWW.IPP.GOV For questions relating to payment of invoices please contact Chesapeake Yard Team Customer Service at 757-523-6940, Fax 757-523-6904, email to FIN-SMB-YARDTEAM@USCG.MIL or submit your invoice electronically at https://www.fincen.uscg.mil/secure/web_invoices_cgyard.htm USCG /ELC SP-PP&M-00l DATED 05/95 REVISION D 10/00 PRESERVATION, PACKAGING & MARKING PRESERVATION – Each piece or assembly that makes up one each of any contract line item (CLIN) shall be preserved in accordance with ASTM-D-3951. PACKAGING – Each preserved contract line item shall be packed in its own carton or box as needed to meet the requirements of ASTM-D-3951.This package shall be considered a unit pack. This unit pack shall meet the requirements of a shipping container. UNITIZATION – Unit packs can be unitized as specified in ASTM-D3951. MARKING – Marking shall be clear, legible, permanent, and in English. UNIT PACKAGES – Shall be marked as specified herein. National Stock Number/ Activity Control Number. Item Name Part Number (as shipped) Purchase Order / Contract Number (example HSCG40-06-P-00000) Date of Manufacturer/Repair The Words “COAST GUARD SFLC MATERIAL” CONDITION (A) Quantity & Unit of Issue (i.e. “1-EA”) Hazardous Material Marking (As required in Code of Federal Regulations (CFR) section 4). Flash Point (If item is a liquid with a flash point of 93.3 degrees C (200 Degrees F) or less.) Propellant Chemical Name (Aerosol Containers only). UNITIZATION – If unitization is used as the final shipping container the unitized pack for one stock number shall be marked as specified below, see “Single Stock Number” If there are multiple stock numbers involved see “Multiple Stock Numbers” herein. For no reason shall more then one delivery order be unitized together. Single Stock Number National Stock Number/ Activity Control Number. Purchase Order / Contract Number (example HSCG40-04-P-00000) The Words “COAST GUARD SFLC MATERIAL” CONDITION (A). Quantity & Unit of Issue (i.e. “1-EA”) Hazardous Material Marking (If needed and as required in Code of Federal Regulations (CFR) section 4). Flash Point (If item is a liquid with a flash point of 93.3 degrees C (200 Degrees F) or less.). The Words “COAST GUARD SFLC MATERIAL” “MULTIPACK” Multiple Stock Numbers “ALL” National Stock Numbers/ Activity Control Numbers. Purchase Order / Contract Number (example HSCG40-04-P-00000) The Words “COAST GUARD SFLC MATERIAL” CONDITION (A). Quantity & Unit of Issue (i.e. “1-EA”) Hazardous Material Marking (If needed and as required in Code of Federal Regulations (CFR) section 4). Flash Point (If item is a liquid with a flash point of 93.3 degrees C (200 Degrees F) or less.). The Words “COAST GUARD SFLC MATERIAL” “MULTIPACK” USCG/ELC SP-PP&M-00l, DATED 05/95, REVISION D 10/00 BAR CODING – All bar coding required herein shall be Code 39, also called Code 3 of 9 in accordance with ANSI/AIM BC1. ALL Stock numbered items shall be bar coded. a. The standard marking required in MARKING for all for all packaging configurations can be applied separately or as part of the Bar Code Label. If the latter option is used the label size shall be adjusted appropriately. b. The stock number or numbers, and purchase order / contract number shall be bar coded with Human Readable Interpretation (HRI) immediately below the bar coding on unit and unitized packs. c. All HRI shall be placed below its associated bar code. The label shall be intended for long term indoor applications where the labels will endure intermittent outdoor exposure. Each label shall be for porous surfaces and consist of paper without plastic laminate.