SENSOR, TEMPERATURE
The United States Coast Guard Surface Forces Logistics Center has an emergent requirement and requesting quotations for the following part: Item 1) NSN: 6660-99-799-3121 RTD TEMP SENSOR RTD TEMPERATUR... The United States Coast Guard Surface Forces Logistics Center has an emergent requirement and requesting quotations for the following part: Item 1) NSN: 6660-99-799-3121 RTD TEMP SENSOR RTD TEMPERATURE SENSOR. STAINLESS STEEL FLEXIBLE TUBING, S/S COUPLING, 1/2" BSP "F" THREAD, 1.9 METER CABLE, TEMP. RANGE -50 DEGREE CENT. TO +500 D.CENHEAD -50 DEGREE CENT. TO +200 DEGREE CENT. THIS RTD TEMPERATURE SENSOR HAS THE FOLLOWING DESCRIPTIVE SPEC DATA: ELEMENT PROBE 70MM LENGTH X 6MM DIAMETER (LOWER SECTION), 75MM X 12.7 MM DIAMETER (UPPER SECTION) RIGHT ANGLE PATTERN. 1/2" BSP "F" THREAD S/S COUPLING STAINLESS STEEL FLEXIBLE TUBING 1900 MM CABLE LENGTH (@ 6 FT, 2 IN). TEMP RANGE -50 DEGREE CENTRIGRADE TO +500 DEGREES CENTRIGRADE HEAD - -50 DEGREE CENTIGRADE TO 200 DEGREE CENTIGRADE 4 CORE PTFE INSULATED AND SCREENED CABLE. THE TEMP SENSOR HAS A 4 WIRE CABLE, THE BLUE, GREEN, RED LEADS ARE USED. THE YELLOW LEAD IS NOT USED. REF: CG DWG 905-WMEC-241-001, SHT 1. CG DWG 905-WMEC-241-005, SHT 5. SEE ITEM #104 IN BOM. OEM STATED DRAWING P/N: B / SKB009 DAVID BROWN SANTASALO P/N: RW3/820039-2. REF: CG DWG 905-WMEC-241-002 STBD RED GEAR A&D, ITEM #104 CG DWG 905-WMEC-241-005 PORT RED GEAR A&D, ITEM #104 CG DWG 905-WMEC-241-001 STBD RED GEAR INSTALL DWG CG DWG 905-WMEC-241-004 PORT RED GEAR INSTALL DWG INSTALLED IN 04 LOCATIONS: 043- OIL TO COOLER 044- OIL FROM COOLER 045- WATER TO COOLER 046- WATER FROM COOLER MFG: BRITISH ROTOTHERM CO LTD PN: B/SK B009 QTY: 6 EA Item 2) NSN: 6660-99-799-3120 SENSOR, TEMPERATURE STAINLESS STEEL FLEXIBLE TUBING AN DCOUPLING, ½ IN “F” THREAD, 1.2 M. CABLE, TEMP. RANGE – 50 DG. TO +500 DEG. C., HEAD – 50 DEG TO +200 DEG. C. OEM STATED DRAWING P/N: SKE13695 1.2MCA. DAVID BROWN SANTASALO P/N: RW3/820039-1. THIS RTD TEMPERATURE SENSOR HAS THE FOLLOWING DESCRIPTION SPEC DATA: ELEMENT PROBE 70MM LENGTH X 6MM DIAMETER (LOWER SECTION), 75 MM X 12.7 MM DIAMETER (UPPER SECTION) RIGHT ANGLE PATTERN. ½” BSP “F” THREAD S/S COUPLING STAINLESS STEEL FLEXIBLE TUBING 1200 MM CALBE LENGTH (@ 3FT, 11 IN). TEMP RANGE -50 DEGREE CENTIGRADE TO +500 DEGREES CENTIGRADE HEAD - -50 DEGREE CENTIGRADE TO 200 DEGREE CENTIGRADE 4 CORE PTFE INSLUTATED AND SCREENED CABLE. THE TEMP SENSOR HAS A 4 WIRE CABLE, THE BLUE, GREEN, RED LEAD IS NOT USED. REF: CG DWG 905-WMEC-241-002 STBD RED GEAR A&D, IEM #103 CG DWG 905-WMEC-241-005 PORT RED GEAR A&D, ITEM #103 CG DWG 905-WMEC-241-001 STBD RED GEAR INSTAL DWG CG DWG 905-WMEC-241-004 PORT RED GEAR INSTALL DWG INSTALLED IN 03 LOCATIONS: 036-FWD GEARWELL BRG 036-AFT GEARWELL BRG 039-THRUST BRG MFG: ROSEMOUNT ENGINEERING CO. LTD PN: SKE13695 1.2MCA QTY: 6 EA PACKAGE AND MARK IAW USCG SFLC INSTRUCTION D-084-0481 Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room bldg 88 This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2022-06 (May 2022) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333618 and the business size standard is 1500. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award on a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number July 26, 2022 at 10:00 pm Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Nov 2021); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (Nov 2021) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.aquisition.gov ; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Nov 2021); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Jan 2022). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note) 52.212-5 are applicable: FAR 52.219-28, Post Award Small Business Program representation (Nov 2020)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2022) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (Jun 2020); FAR 52.222-50, Combating Trafficking in Persons (Oct 2020)(22 U.S.C.Chapter 78 and E.O. 13627); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Jun 2020) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (Jan 2021); FAR 52.225-3, Buy American Act-Free Trade Agreement (Jan 2021)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (Oct 2018)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf
Data sourced from SAM.gov.
View Official Posting »