Inactive

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5331-12-330-4292 O-RING MFG: MTU FRIEDRICHSHAFEN GMBH Par... The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: Item 1) NSN: 5331-12-330-4292 O-RING MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 700429069000 Quantity: 200 O-RING USED ON FUEL PUMP ON THE 154' WPC MAIN DIESEL ENGINE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 SINGLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY Item 2) NSN: 2910-12-405-1513 FILTER ELEMENT,FLUID MFG: MTU FRIEDRICHSHAFEN GMBH Part number: X57508300091 Quantity: 100 SPIN ON FUEL FILTER FOR MTU MAIN DIESEL ENGINE 154' FRC. INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 SINGLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY Item 3) NSN: 5330-12-387-1074 GASKET SET MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 23540471 Quantity: 50 OIL CENTRIFUGAL SPINNER SEAL KIT USED ON THE 154' WPC 20V4000M93L MAIN DIESEL ENGINE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 42. PLACE BETWEEN SHEET OF, OR IN FOLD OF, CORRUGATED FIBERBOARD OF SUFFICIENT STIFFNESS TO RESIST BENDING, OVERWRAP WITH WATERPROOF WRAPPING PAPER CONFORMING TO PPPB-1055 AND SEAL WITH PRESSURE SENSITIVE TAPE CONFORMING TO ASTM-D5486 OR ADHESIVE CONFORMING TO MMMA- 260. SEAL IN BAGS CONFORMING TO CLASS B, C OR E OF MIL-DTL-117, USING STIFFENING MATERIAL INTERNALLY IF NEEDED TO MAINTAIN RIGIDITY. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGYItem 4) NSN: 6640-12-400-4805 PAPER,FILTER MFG: MTU FRIEDRICHSHAFEN GMBH Part number: XP52718300060 Quantity: 275 CENTRIFUGAL OIL FILTER THESE FILTER ARE SOLD IN PACKS OF 25. OEM RECCOMENDS THEY BE SOLD THIS WAY SO THEY DO NOT TEAR. A CHANGE RECORD WILL BE SUBMITTED TO CHANGE QUANTITY OF ISSUE FROM EA (EACH) TO PG (PACKAGE). INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 SINGLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY Item 5) NSN: 5330-12-386-7180 PACKING,PREFORMED MFG: MTU FRIEDRICHSHAFEN GMBH Part number: X00004639 Quantity: 40 SQUARE SECTION O-RING FOR THE LUBE OIL STRAINER USED ON THE FRC MDE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 SINGLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY Item 6) NSN: 4730-01-256-8978 BOLT, FLUID PASSAGE MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 915011006302 Quantity: 30 BANJO BOLT USED AS PART OF THE COOLING SYSTEM 87 8V396TE94 MAIN DIESEL ENGINES. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10. EACH PACKAGE SHALL BE MARKED IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388- 2007, CODE 39 SYMBOLOGY. FAILURE TO MEET REQUIREMENTS FOR PACKAGING, PACKING, MARKING AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AT THE WAREHOUSE AND RETURNED TO THE VENDOR. Item 7) NSN: 3010-01-255-4200 COUPLING,SHAFT,FLEX MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 0052501101 Quantity: 15 FLEX COUPLING USED ON THE MTU 8V395 TE94 AND 20V4000M93L DIESLE ENGINES ON THE 87 AND 154 VESSELS. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED AS APROPRIATE TO PREVENT MOVEMENT OR DAMAGE FROM EXTERNAL IMPACT. EACH ITEM SHALL THEN BE PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. EACH PACKAGE SHALL BE MARKED IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388- 2007, CODE 39 SYMBOLOGY. FAILURE TO MEET REQUIREMENTS FOR PACKAGING, PACKING, MARKING AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AT THE WAREHOUSE AND RETURNED TO THE VENDOR. Item 8) NSN: 5305-12-325-8416 SCREW,CAP,HEXAGON MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 5599900001 Quantity: 50 MTU SCREW CAP INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY Item 9) NSN: 5330-12-178-6283 SEAL,NONMETALLIC SP MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 5500160121 Quantity: 600 SEAL USED AS PART OF THE 8V396 MAIN DIESEL ENGINE ON THE 87 WPB VESSELS. EACH ITEM SHALL BE INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10. EACH PACKAGE SHALL BE MARKED IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388- 2007, CODE 39 SYMBOLOGY. FAILURE TO MEET REQUIREMENTS FOR PACKAGING, PACKING, MARKING AND BAR-CODING WILL RESULT IN THE ITEM(S) BEING REJECTED AT THE WAREHOUSE AND RETURNED TO THE VENDOR. Item 10) NSN: 5330-12-156-4539 GASKET MFG: MTU FRIEDRICHSHAFEN GMBH Part number: 007603014103 Quantity: 600 MTU SEALING RING INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-1E METHOD 10, CUSHIONED IN A DOUBLE LAYER OF 3/4 IN BUBBLE WRAP AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118 DOUBLE-WALL FIBERBOARD BOX. FAILURE TO MEET THE PACKING, PACKAGING, MARKING AND BAR CODING REQUIREMENTS WILL RESULT IN WAREHOUSE REJECTION AND ITEMS WILL BE SHIPPED BACK TO VENDOR. MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW ISO/IEC-16388-2007, CODE 39 SYMBOLOGY The items are used on various US Coast Guard vessels. All items will be individually packaged and bar-code in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room bldg 88 This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005 97 (Oct 2018) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333618 and the business size standard is 1250. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. The Coast Guard intends to award on a Firm Fixed Price Contract. MTU MOTOREN UND TURBIN EN-UNION is the Original Equipment Manufacturer (OEM) of the listed items used on the 154' WPC Coast Guard vessels. The reproduction manufacturing drawings, specifications and other technical data have not been purchased and is proprietary. The material, manufacturing processes and technical data of the listed items are proprietary to the OEM and not for sale as was requested by the Coast Guard. The use of Non-OEM MIU MOTOREN UND TURBINEN-UNION products will void the currcnt 154' WPC engine warranties. Authorized distributors shall provide documentation certifying that they are submitting are authentic MIU MOTOR EN UND TURBINEN-UNION items and meet OEM specifications and standards and they pertain to the 154' WPC Fast Response Cutters Coastal Patrol Vessels. All responsible sources may submit a quotation to eric.i.goldstein@uscg.mil, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is August 16, at 10:00 AM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (June 2016); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (December 2016) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Jan 2017). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)52.212-5 are applicable: FAR 44), FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf