Inactive Total Small Business Set-Aside (FAR 19.5)

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: LINE: 1 NSN: 3120 99-774-1736 BEARING SLEEVE 270 WMEC RED GEAR BEARING... The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the following part: LINE: 1 NSN: 3120 99-774-1736 BEARING SLEEVE 270 WMEC RED GEAR BEARING SLEEVE 200 X 150 BEARING (PINION) INDIVIDUALLY PACKAGE AND MARK EACH BEARING PACKAGE IAW ASTM-D-3951, MARK IAW SP-PP&M-001 MFG NAME: DAVID BROWN SPECIAL PRODUCTS LTD PART_NBR: RW1/781032-1 Quantity: TWO (2) EACH LINE: 2 NSN: 3120 99-617-3383 BEARING SLEEVE 270 WMEC RED GEAR QUILL BEARING 140 X 105 BEARING (QUILL) INDIVIDUALLY PACKAGE AND MARK EACH BEARING PACKAGE IAW ASTM-D-3951, MARK IAW SP-PP&M-001 MFG NAME: DAVID BROWN SPECIAL PRODUCTS LTD PART_NBR: RW1/810667-1 Quantity: TWO (2) EACH LINE: 3 NSN: 6660 99-799-3120 TEMPERATURE SENSOR STAINLESS STEEL FLEXIBLE TUBING AND COUPLING ½ INCH. "F" THREAD, ½ M. CABLE, TEMP. RANGE- 50 DEG TO +200 DEG. C. OEM STATED DRAWING P/N: SKE13695 1.2MCA DAVID BROWN SANTASALO P/N: RW3/820039-1 THIS RTD TEMPERATURE SENSOR HAS THE FOLLOWING DESCRIPTIVE SPEC DATA: ELEMENT PROBE 70MM LENGTH X 6MM DIAMETER (LOWER SECTION), 75MM X 12.7 MM DIAMETER (UPPER SECTION) RIGHT ANGLE PATTERN. 1/2" BSP "F" THREAD S/S COUPLING STAINLESS STEEL FLEXIBLE TUBING 1200 MM CABLE LENGTH (@ 3 FT, 11 IN). TEMP RANGE -50 DEGREE CENTRIGRADE TO +500 DEGREES CENTRIGRADE HEAD - -50 DEGREE CENTIGRADE TO 200 DEGREE CENTIGRADE 4 CORE PTFE INSULATED AND SCREENED CABLE. THE TEMP SENSOR HAS A 4 WIRE CABLE, THE BLUE, GREEN, RED LEADS ARE USED. THE YELLOW LEAD IS NOT USED. INDIVIDUALLY PACKAGE AND MARK EACH ITEM PACKAGE IAW ASTM-D-3951, MARK IAW SP-PP&M-001 MFG NAME: DAVID BROWN SPECIAL PRODUCTS LTD PART_NBR: RW3/820039-1 Quantity: TEN (10) EACH The items are used on various US Coast Guard vessels. All items will be individually packaged and bar-coded in accordance with Coast Guard specification IAW SP-PP&M-001. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg 88. Required delivery date: 04/15/2020 OR AS SOON AS POSSIBLE This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2005-101 (JANUARY 2019) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 339991 and the business size standard is 750. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. Award will be lowest price technically acceptable. The Coast Guard intends to award on a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is AUGUST 05, 2019, at 1:00 PM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (June 2016); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items (June 2016) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (May 2015); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (June 2016). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note)52.212-5 are applicable: FAR 52.219-6 Notice of Total Small Business Set-Aside (Nov 2011)(15 U.S.C. 644), FAR 52.219-28, Post Award Small Business Program representation (Jul 2013)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Feb 2016) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (April 2015)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf