SWITCH FLOW
The United States Coast Guard Surface Forces Logistics Center has an urgent requirement and requesting quotations for the following part: Item 1) NSN: 5930-99-733-1096 SWITCH FLOW FLOW SWITCH UNSED ON... The United States Coast Guard Surface Forces Logistics Center has an urgent requirement and requesting quotations for the following part: Item 1) NSN: 5930-99-733-1096 SWITCH FLOW FLOW SWITCH UNSED ON THE REDUCTION GEARS FOR 270' MAIN PROPULSION MODEL NUMBER .5-S-LP-3EE-80CS-4F150-S3-D4-XR-S0.13 QUILL SHAFT BEARING, ½ INCH PIPE, FLAGED 150 LB, .5 TO 5 LITER PER MINUTE, NORMAL SETTING .5 LITERS PER MINUTE PINON BEARING (USING 2 SWITCHES), ½ INCHE PIPE 150#, FLANGED, ADJUSTABLE RANGE, 5 TO 5 LITERS PER MINUTE, NORMAL SETTING 2 LITER PER MINUTE OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG-1-S-LP-3EE-450CS-4F150-S3-D4 QTY: 9 EA Item 2) NSN: 5930-99-733-1092 SWITCH, FLOW FLOW INDICATOR SWITCH, CONNECTION SIZE: 2", 150 LB ANSI FLANGE, FACE TO FACE LENGTH: 160 MM, BODY MATERIAL: CARBON STEEL, FLOW RATE: 2 GPM, THREE WIRE SPDT SWITCH RATED AT 15 A- 125,250 OR 480 VAC, SEALS: VITON, FLOW DIRECTION: D4 (DOWN), VISCONSCITY: 450 CENTISTROKE, WITH SCALED DIAL AND MECHANICAL POINTER MODEL NUMBER FMG-3-S-LP-3EE-80CS-6F150-S3-D4-XR-S2.11 THRUST BEARING, ¾ INCH PIPE, FLANGED 150#, 2 TO 12 LITERS PER MINUTE ADJUSTABLE RANGE, NORMAL SEETING 8 LITERS PER MINUTE OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG-3-S-LP-3EE-80CS-6F150-S3-D4 QTY: 9 EA Item 3) NSN: 5930-99-733-1093 SWITCH FLOW W-88MM, L-160MM, D-100MM, H-130MM, 20MM CONDUIT INLET, CARBON STEEL, NYLON, PLASTIC, ALUMINUM, S/STEEL 316, MILD STEEL, FLOW RATE MAX 6 GPM MODEL NUMBER FMG-1-S-LP-3EE-80CS-4F150-S3-D4-XR-S0.26 GEAR WHEEL BEARING (USES 2 SWITCHES), ½ INCH PIPE, FLANGED 150#, ADJUSTABLE RANGE .5 TO 5 LITERS PER MINUTE, NORMAL SETTING 1 LITERS PER MINUTE OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG-1-S-LP-3EE-80CS-4F150-S3-D4 QTY: 18 EA Item 4) NSN: 5930-01-670-2170 SWITCH, FLOW 270 WMEC RED GEAR L/O SWITCH/PINION BEARING MODEL NUMBER FMG-2-S-LP-3EE-80CS-4F150-S3-D4-XR-S0.53 PINION BEARING (USING 2 SWITCHES), 1.2 INCH PIPE 150#, FLANGED, ADJUSTABLE RANGE .5 TO 5 LITERS PER MINUTE, NORMAL SETTING 2 LITERS PER MINUTE OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG-2-S-LP-3EE-80CS-44F150-S3-D4 QTY: 18 EA Item 5) NSN: 5930-99-726-2343 SWITCH, FLOW 270 WMEC RED GEAR L/O SWITCH/PINION BEARING 108MM WIDTH, 180MM LEN, 180MM DEPTH, 130MM-H, 20MM CONDUIT INLET, CARBON STEEL HOUSING, FLOW RATE 15 GPM MAX MESH SPRAYERS, 1 INCH PIPE, FLAGED 150#, ADJUSTABLE RANGE 10 TO 40 LITERS PER MINUTE, NORMAL SETTING 25 LITERS PER MINUTE MODEL NUMBER FMG-12-S-LP-3EE-80CS-8F150-S3-D4-XR-S6.6 PINION BEARING (USING 2 SWITCHES), 1.2 INCH PIPE 150#, FLANGED, ADJUSTABLE RANGE .5 TO 5 LITERS PER MINUTE, NORMAL SETTING 2 LITERS PER MINUTE OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG-12-S-LP-3EE-80CS-8F150-S3-D4 QTY: 9 EA Item 6) NSN: 5930-99-733-1095 SWITCH, FLOW WIDTH: 127 MM,LENGTH: 180MM, DEPTH: 180MM, HEIGHT: 130MM 20 MM CODUIT ENTRY, MATERIAL: CARBON STEEL HOUSING FLOW RATE: 18 GPM MAX MODEL NUMBER FMG-50-LP-3EE-80CS-12F150-S3-D4-S21 OEM: SURE FLOW PRODUCTS LLC PART NUMBER: FMG50-S-LP-3EE-80CS-12F150-S3-D1 QTY: 9 EA *****PACKAGING REQUIREMENTS***** PACKAGE IAW SP-PP&M-001 The above items are used on various US Coast Guard vessels. All items shall be individually packaged, marked and bar-coded in accordance with above. Inspection and acceptance shall take place at Destination after verification of preservation, individual packaging and marking/bar coding requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, 2401 Hawkins Point Road, Baltimore MD 21126, Mark for: Receiving Room Bldg 88. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. Substitute parts are not acceptable. It is anticipated that a non-competitive sole source purchase order shall be awarded as a result of this synopsis/solicitation. It is the Government's belief that only Sure Flow Products, LLC and/or their authorized distributors can manufacture the required OEM parts. Concerns having the expertise and required capabilities to provide these items are invited to submit complete information discussing the same within two (2) calendar days from the day this notice posted. The data must include sufficient detail to allow the Coast Guard to evaluate the proposal relative to the requirements. The information submitted must include a letter from the OEM verifying the offeror is an authorized distributor, and verifying the OEM will supply genuine OEM parts. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR Subpart 12.6, FAC 2019 01 (Dec 2018) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is 333999 and the business size standard is 500. The resultant purchase order will be awarded using simplified acquisition procedures in accordance with FAR 13.106 apply. The U.S. Coast Guard intends to award on an all or none basis to a responsible offeror whose offer conforming to the solicitation will be the most advantageous to the Government. The Coast Guard intends to award on a Firm Fixed Price Contract. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with SYSTEMS FOR AWARD MANAGEMENT (www.sam.gov) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is February 13, 2019 at 10:00 AM Eastern Standard Time OFFERORS MUST SUBMIT THE FOLLOWING INFORMATION ON THEIR QUOTE: Disclosure: The offeror under this solicitation represents that [Check one]: __ it is not a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73; __ it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it has submitted a request for waiver pursuant to 3009.104-74, which has not been denied; or __it is a foreign incorporated entity that should be treated as an inverted domestic corporation pursuant to the criteria of (HSAR) 48 CFR 3009.104-70 through 3009.104-73, but it plans to submit a request for waiver pursuant to 3009.104-74. (g) A copy of the approved waiver, if a waiver has already been granted, or the waiver request, if a waiver has been applied for, shall be attached to the bid or proposal __HSAR 3052.209-70 Prohibition on contracts with corporate expatriates (June 2006) (End of provision) The following FAR Clauses provisions apply to this solicitation. FAR 52.212-1, Instructions to Offerors-Commercial Items (Oct 2018); FAR 52.212-3, Offeror Representations and Certifications-Commercial Items Oct 2018) with Alternate I. Offeror(s) must include a completed copy of FAR 52.212-3 with their quote. The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.arnet.gov.; FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Oct 2018); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (Jan 2019). The following clauses listed within FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015), 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553), 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws 108-77, 108-78 (19 U.S.C. 3805 note). 52.212-5 are applicable: FAR 44), FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2018) (E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (April 2015); FAR 52.222-26, Equal Opportunity (Sep 2016)(E.O. 11246); FAR 52.222-36, Equal Opportunity for workers with disabilities (July 2014); FAR 52.223-18 Contractor Policy to Ban Text Messaging while Driving (Aug 2011) (E.O. 13513); FAR 52.225.1 Buy American Act-Supplies (May 2014); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); FAR 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer-Central Contractor Registration (July 2013)(31 U.S.C. 3332). The following items are incorporated as addenda to this solicitation: Copies of HSAR clauses may be obtained electronically at www.dhs.gov. CGAP 3042.302-90 Valuation Requirements for the Acquisition of Spare Parts Purchased for Inventory Control Points from HQ Contracts (OCT 2008). Copies of CGAP clauses may be obtained electronically at: www.uscg.mil/acquisition/procurement/pdf/CIM_4200_19H.pdf
Links ()
Attachments ()
Data sourced from SAM.gov.
View Official Posting »