Inactive Total Small Business Set-Aside (FAR 19.5)

The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the manufacturing of the following parts: Item1) NSN 2040 01-641-3946, LARGE DECK PANEL 29... The United States Coast Guard Surface Forces Logistics Center has a requirement and requesting quotations for the manufacturing of the following parts: Item1) NSN 2040 01-641-3946, LARGE DECK PANEL 29 3/4" X 3/4" X 5/8" THICK HONEYCOMB PANNEL WITH WOVEN FIBERGLASS SKIN. 3.3 PCF DENSITY THICKNESS OF FIBERGLASS SKIN OF 0.060 INCHES THICK. A RANGE OF 0.058" - 0.062" IS ACCEPTABLE. THICKNESS OF SOUND MAT BARRIER IS 1/8" WITH 1/4" FOAM PADDING. SOUND MAT BARRIER IS TECTURED FOR NON-SLIP SURFACE. COLOR IS FEDERAL STANDARD 37038. LATCHES ARE NOT REQUIRED AND RUBBER MATTING SHOULD BE CUT THE SIZE OF THE LATCH HOLE AND ATTACHED TO THE PANEL WITH ADHESIVE. P/N 051-100020LAEA Quantity 175 EA Delivery Schedule - Delivery is required by 10/01/20. Please provide your proposed delivery________ Items used for the 47’ MLB. Items shall be manufactured in accordance with drawing number 47B MLB 110 600 Sheet 1, 2, 3 and 4. Each Deck Plate shall be individually packed and marked. Inspection and acceptance shall take place at Destination after verification of preservation, Individual packaging and marking requirements and confirmation of no damage during transit. Failure to comply with packaging requirements will result in rejection and nonpayment. It is the Governments belief that MAS Industries is the primary manufacture of these deck panel, however Advance Structures Inc. has provided these official deck plates in the past. Quality Assurance – The Coast Guard reserves the right to verify or have performed any of the inspection set forth herein where such inspection are deemed necessary to assure that supplies and services conform to prescribed requirements. The contractor shall notify the Coast Guard Contracting Officer prior to the schedules commencement of any inspection required by this specification. Delivery shall be F.O.B. Destination to USCG Surface Forces Logistics Center, Baltimore MD. EVALUATION Award shall be made without discussions unless the Contracting Officer determines discussions are necessary. Quotations received in response to this synopsis/solicitation shall be evaluated on a best value basis utilizing the following technical, price and price-related factors: (a) Price, including shipping charges (b) Past Performance (c) Cost of Quality Assurance Inspection(s)-travel related expenses for the Government to provide a Quality Assurance Representative for final test and inspection. Final test and inspection shall be conducted at the contractor’s facility, as designated below, that the services will be performed. This price shall be included in the evaluation of quotations. For evaluation purposes only, expenses will be based on one trip lasting one (1) day in duration. Airfare will be based on travel during normal working hours. Destination for Quality Assurance Representative Inspection Visits: Name of Company: ______________________ Address: ______________________ City, State, Zip Code:______________________ Point of Contact: ______________________ Telephone Number _______________________ The Offeror shall supply at least three (3) contracts completed during the past three years or currently in process for the same services as are being solicited under this solicitation. Contracts listed may include those entered into by the Federal Government, agencies of the state and local governments, and commercial customers. References other than those provided by the Offeror may be contacted by the Government, including Government databases, to obtain additional information that shall be used in the evaluation of the offeror’s past performance. The Government may waive the submission of past performance information by the offeror if adequate data already exists on file within this office. This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format outlined in FAR 13 FAC 20-06 (JUN 2020) and as supplemented with additional information included in this notice. This announcement constitutes the only solicitation. Quotations are being requested and a written solicitation will not be issued. The NAICS code for this solicitation is _336611 and the Small Business Size Standard is _500. All responsible sources may submit a quotation, which if timely received, shall be considered by the Agency. Companies must have valid DUNS numbers and be registered with Central Contractor Registration (CCR) and shall provide the company Tax Information Number (TIN) with their offer. The closing date and time for receipt of quote is _AUG 4, 2020_, at _12_ p.m. Eastern Standard Time. . The following FAR Clauses apply to this solicitation. Offerors may obtain full text versions of these clauses electronically at www.acquisition.gov ; FAR 52.204-7, Systems for Award Management (Oct 2018); FAR 52.212-4, Contract Terms and Conditions-Commercial Items (Oct 2018); FAR 52.212-5, Contract Terms & Conditions Required to Implement Statutes or Executive Orders-Commercial Items (OCT 2019). The following clauses listed within FAR 52.212-5 are applicable FAR 52.219-28, Post Award Small Business Program representation (Jul 2013)(15 U.S.C. 632(a)(2); FAR 52.222-3, Convict Labor (Jun 2003)(E.O. 11755); FAR 52.222-19 Child Labor-Cooperation with Authorities and Remedies (Jan 2018)(E.O. 13126); FAR 52.222-21, Prohibition of Segregated Facilities (Apr 2015); FAR 52.222-26, Equal Opportunity (Sept 2016)(E.O. 11246); FAR 52.222-36, Affirmative Action for Workers with Disabilities (Jul 2014)(29 U.S.C. 793); FAR 52.223-18, Contractor Policy to Ban Text Messaging While Driving (Aug 2011); FAR 52.225-3, Buy American Act-Free Trade Agreement (May 2014)(41 U.S.C. 10a-10d); 52.225-13, Restrictions on Certain Foreign Purchases (Jun 2008); 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration (Jul 2013)(31 U.S.C.