Inactive

This is a combined synopsis/solicitation for commercial item off-the-shelf power lifting racks/training stations or “Equal/Equivalent” equipment for the Coast Guard Academy in accordance FAR Subpart 1... This is a combined synopsis/solicitation for commercial item off-the-shelf power lifting racks/training stations or “Equal/Equivalent” equipment for the Coast Guard Academy in accordance FAR Subpart 12.6. The combined Synopsis/Request for Quotation (RFQ) number is 70Z03920RFQBB151, utilizing Simplified Acquisition Procedures under FAR Part 13. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circulars. The associated North American Industrial Classification System (NAICS) code for this procurement is 339920. This requirement is a Small Business set-aside and only qualified offerors may submit bids. Award shall be made to the offeror whose proposal offers the greatest value to the government, on a firm fix price basis. No substitute equipment, only like item in order to standardize preexisting equipment. The U. S. Coast Guard Academy, New London CT, request a quote for the following items: GENERAL. The contractor shall provide all labor, materials, equipment and services, to furnish the U. S. Coast Guard Academy, New London, CT with 20 lifting racks/training stations for use by cadets in the new strength and conditioning center consisting of: Custom Performance Training Station (20 total) High Rotation Attachment (20 total) Multi-Angle Dumbbell Bench (20 total) Pro Plate Load Bi-Lateral Leg Press (2 total) Texas Power Bar (20 total) The lifting racks must fit into the Strength & Conditioning Center approximately 5,000 square feet. SPECIFICATIONS. The racks shall consist of the following minimum components/specifications: Custom Performance Training Station Overall dimensions: 10 units at 122” deep, 104” wide, 108” high with a pulley unit height of 108”, 1500lb weight. 10 units at 122” deep, 104” wide, 96” high with a pulley unit height of 96”, 1500lb weight. These units will be located under a mezzanine. Inside dimensions of power rack: 43” between tubes width, 40” between tubes depth. Frame uprights: 4” x 3” tubes of A500 structural tubing with a wall thickness of 3/16”. Tubes are laser cut with 15 safety slots supporting “Rhino Horn” shaped hook bar catches. Frame tops: 4” x 3” tubes with 3/16” wall thickness. Top braces connect to side tube uprights and are angle cut twice at 22 ½% to provide a unique physical presence and strength. Frame base: 2.5” x 3.5” with 3/16” wall thickness. Base supports tube uprights and have 4” x 5.5 x .5” thick steel foot plates to accept optional rubber floor bumpers. Weight storage: 4-3 angles weight storage configuration, 4 pegs to the outside and 3 pegs on the inside of the rack. Bottom peg is 11” in length. Bumper plate storage: Self-contained bumper plate storage is built beneath weight plate storage on each side of rack. Storage area has inside dimensions of 20” x 22” with prepositioned dividers designed to hold multiple bumper plates. Safety catches: 2” x 3” tube with 1” cold rolled bar running through entire length of tube. UHMW plastic covers top and end of catch. “Rhino Horn” shaped hook bar catches. Frame Components: all components should be fabricated and use jig welding fixture. Bench & spotter brace: Standard 2” x 3” tube bolts into rear uprights with 4-3/8” x 1” bolts on each side and tube bolts into frame base with 4-38/” x 1” bolts. Assembly: 40 bolts, 38/” x 1” serrated flange hex head cap screw-zinc plated, lock frame together. Finish: Color TBD and approved at time of award. Chin-up bar: 1.5” solid cold rolled steel bar 49” long with angled ends. Bar knurled. Two handles 10” apart and 2” in diameter extend 8” inside rack for additional lifts. Chin-up bar to be installed on racks on-site so that appropriate height of bar can be determined. Minimum 1 year Warranty. Adjustable cable column – pulley feature: Must configure to fit in the inside of the Power Rack 16 adjustable positions in 5” increments cable guide swivels 180 degrees on 2 bronze bearings 1” solid chrome guide rods 7/16” diameter weight selector pin locks in place and is connected to weight stack to prevent loss rubber bumpers under each weight stack 4.5” pulleys fully machined steel weight stacks with powder coat finish 600 lb weight stacks with 20 lb increments and 5 lb rubber split weight – 2:1 resistance ratio with one handle and 4:1 with both handles top weight plate with free floating bushings steel weight stack guards Components should be fabricated and use jig welding fixture. welded end caps powder coat paint system multiple pulley handles included removable t-bar assembly adjustable dip attachment device fixed 1.25” chin up handle band attachment devise Exerflex pro fitness cable. 2. High Rotation Attachment Overall dimensions: 19” long, 3.5” wide, 7” high, 10 lbs weight Finish: Color TBD and approved at time of award. Minimum 1 year Warranty. 3. Multi-Angle Dumbbell Bench Dimensions: 19” high, 49.75” deep, 30 1/8” wide, 110 lbs heavy Frame base: 3.5” x 2.5” 7 ga and 11 ga tubing Frame components: fabricated and use jig welding fixture. Pad & Upholstery: High quality 2” foam pads with double stitched seams, color TBD and approved at time of award. Finish: Powder coat paint finish, color TBD and approved at time of award. Minimum 1 year Warranty. 4. Pro Plate Load Bi-Lateral Leg Press Dimensions: 106” long, 61” wide, 62.75” high, 830 lbs weight, 165 lbs empty carriage weight. Frame Material: .25” A36 plate formed into channels which supports each carriage. Bearing Wheels: 4 bearing wheels per carriage, with capacity per wheel of 750 lbs. Leg Press Angle: 40 degrees – foot plates angle back 10 degrees from perpendicular surface of carriage. Back Pad: Adjustable in 2 angles 35 degrees from horizontal and 45 degrees from horizontal. Weight Horns: Carriage is capable of holding 10-45 lb plates. Weight Storage: 5 peg weight storage on each side of racks. 1.25” solid cold rolled steel bars welded on front and back side of storage frame. Pad & Upholstery: High quality 3” thick foam pads, with double stitched seams. Color TBD and approved at time of award. Minimum 1 year Warranty. 5. Texas Power Bar Overall length: 85 13/16 inches Bar length only: 51.75 inches Sleeve length only: 17 inches Bar diameter: 1.125 inches Sleeve diameter: 1.97 inches Weight: 45 lbs Tensile strength: minimum 155,000 PSI PERIOD OF PERFORMANCE. The racks should ship within 4 months after receipt of order. SUBMITTALS. A full copy of the manufacturer’s specification shall be furnished with the bidder’s quotation. WARRANTY. Racks shall carry a limited lifetime warranty against all defects in material and workmanship. Quotations must include all components, delivery and install expenses to fulfill the requirements. Equipment is to be delivered to: U.S. Coast Guard Academy 15 Mohegan Avenue New London, CT 06320 ***Question Submission: Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Technical question maybe address to Katherine Bossardet by Email at Katherine.K.Bossardet@uscga.edu or by phone at 860-444-8600. RFQ package questions must be submitted via email to david.f.palacios@uscg.mil or by phone 860-444-8245 | Questions not received within a reasonable time prior to close of the solicitation may not be considered*** Ensure to reference the solicitation number when submitting your quote. Offeror must be registered in the System for Award Management (SAM) database before an award can be made to them. If the offeror is not registered in the SAM, it may do so through the SAM website https://www.sam.gov/ The selected Offeror must comply with the following commercial item terms and conditions, which are incorporated herein by reference: FAR 52.212-1, Instructions to Offerors - Commercial Items, applies to this acquisition; FAR 52.212-3, Offeror Representations and Certifications - Commercial Items - the selected offeror must submit a completed copy of the listed representations and certifications; FAR 52.212-4, Contract Terms and Conditions - Commercial Items; FAR 52.212-5, Contract Terms and Conditions Required To Implement Statutes or Executive Orders-Commercial Items, paragraph (a) and the following clauses in paragraph (b): 52.222-21, 52.222-26, 52.222-35, 52.222-36, 52.222-37, 52.225-13, 52.232-34. The full text of the referenced FAR clauses may be accessed electronically at https://www.acquisition.gov/far/