Inactive

A00002: This amendment has revised the synopsis to add TEK Precision Co., Ltd, (Cage Code 65780) as a Manufacture Cage Code, and to amend the Terms and Conditions, (see highlighted areas on page 1 and... A00002: This amendment has revised the synopsis to add TEK Precision Co., Ltd, (Cage Code 65780) as a Manufacture Cage Code, and to amend the Terms and Conditions, (see highlighted areas on page 1 and page 3). The response date has been extended until April 27, 2023 at 2:00 PM EDT. A00001 - The response date for this solicitation has been extended until April 20, 2023 at 2:00 PM EDT. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6 and part 13, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. Solicitation number 70Z03823QJ0000184 is issued as a Request for Quotation (RFQ). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2023-02, effective 16 March 2023. The applicable North American Industry Classification Standard Code is 336413. The small business size standard is 1,250 employees. This is an unrestricted requirement. All responsible sources may submit a quotation which shall be considered by the agency. It is anticipated that a firm-fixed price purchase order will be awarded on a competitive basis as a result of this synopsis/solicitation for the following part: Item Name: Coupling, Shaft, Rigi NSN: 3010-01-164-4149 P/N: 70400-26100-042 Qty: 10 EA Manufacture Cage Code: 78286 or 65780 Requested Delivery: 07-Jun-2023 At the time of award, the USCG intends to place an order for the purchase of ten (10) item(s). IAW Federal Acquisition Regulation (FAR) 52.217-6 the USCG may require number two (2) additional items for a maximum quantity of twelve (12) at the same price and lead time as the original order, for up to three hundred and sixty-five (365) days after the initial award date. ***Please note that if the USCG chooses to exercise any optional quantity modifications, such modifications will be issued unilaterally to the contractor. All parts shall have clear traceability to the Original Equipment Manufacturer (OEM), Sikorsky Aircraft Corporation (Cage Code 78286) or TEK Precision Co., Ltd. (Cage Code 65780). Traceability means a clear, complete, documented, and auditable paper trail which traces each step from an OEM or distributor to its current location. Concerns having the expertise and required capabilities to provide these items are invited to submit offers in accordance with the requirements stipulated in this solicitation. Parts must be approved in accordance with Federal Aviation Administration (FAA) guidelines to ensure safety of our aircrew. The Government shall ensure all procurements are awarded without jeopardizing quality or safety of flight. Only the use of airworthy commercial specifications or standard military specifications/military standard parts will be utilized and approved from this solicitation. Newly manufactured commercial items will only be procured from sources able to provide a certificate of airworthiness, FAA 8130 (preferred) or equivalent European Aviation Safety Agency (EASA) Certification, or a certificate of conformance and traceability to the OEM. The Federal Aviation Regulation, Part 21, outlines certification procedures. The contractor shall furnish a Certificate of Conformance (COC) in accordance with Federal Acquisition Regulation (FAR) clause 52.246-15. COC must be submitted in the format specified in the clause. Offerors must be able to provide necessary certification including traceability to the manufacturer, manufacturer's COC and its own certificate of conformance to ensure parts are in airworthy condition, suitable for installation on USCG aircraft. Prospective vendors who are not the OEM or an authorized distributor must provide traceability for the offered product back to the manufacturer or authorized distributor. All parts shall be NEW approved parts. NOTE: NO DRAWINGS, SPECIFICATIONS OR SCHEMATICS ARE AVAILABLE FROM THIS AGENCY. SEE ATTACHMENT 1 - “TERMS AND CONDITIONS – 70Z03823QJ0000184” FOR APPLICABLE CLAUSES, INSTRUCTIONS AND EVALUATION CRITERIA. Closing date and time for receipt of offers is 4/27/2023 at 2:00PM Eastern Standard Time. Anticipated award date is on or about 5/9/2023. E-mail quotations are preferred and may be sent to MRR-Procurement@uscg.mil, attention Michelle Monds. Please indicate 70Z03823QJ0000184 in subject line. NOTICE FOR FILING AGENCY PROTESTS United States Coast Guard Ombudsman Program It is the policy of the United States Coast Guard (USCG) to issue solicitations and make contract awards in a fair and timely manner. The Ombudsman Program for Agency Protests (OPAP) was established to investigate agency protest issues and resolve them without expensive and time- consuming litigation. OPAP is an independent reviewing authority that is empowered to grant a prevailing protester essentially the same relief as the Government Accountability Office (GAO). Interested parties are encouraged to seek resolution of their concerns within the USCG as an Alternative Dispute Resolution (ADR) forum rather than filing a protest with the GAO or some external forum. Interested parties may seek resolution of their concerns informally or opt to file a formal agency protest with the Contracting Officer or Ombudsman. Informal Forum with the Ombudsman. Interested parties who believe a specific USCG procurement is unfair or otherwise defective should first direct their concerns to the applicable Contracting Officer. If the Contracting Officer is unable to satisfy their concerns, interested parties are encouraged to contact the U.S. Coast Guard Ombudsman for Agency Protests. Under this informal process the agency is not required to suspend contract award performance. Use of an informal forum does not suspend any time requirement for filing a protest with the agency or other forum. In order to ensure a timely response, interested parties should provide the following information to the Ombudsman: solicitation/contract number, contracting office, Contracting Officer, and solicitation closing date (if applicable). Formal Agency Protest with the Ombudsman. Prior to submitting a formal agency protest, protesters must first use their best efforts to resolve their concerns with the Contracting Officer through open and frank discussions. If the protester’s concerns are unresolved, an Independent Review is available by the Ombudsman. The protester may file a formal agency protest to either the Contracting Officer or as an alternative to that, the Ombudsman under the OPAP program. Contract award or performance will be suspended during the protest period unless contract award or performance is justified, in writing, for urgent and compelling reasons or is determined in writing to be in the best interest of the Government. The agency’s goal is to resolve protests in less than 35 calendar days from the date of filing. Protests shall include the information set forth in FAR 33.103(d) (2). If the protester fails to submit the required information, resolution of the protest may be delayed or the protest may be dismissed. To be timely protests must be filed within the period specified in FAR 33.103(e). Formal protests filed under the OPAP program should be submitted electronically to OPAP@uscg.mil and the Contracting Officer or by hand delivery to the Contracting Officer. Election of Forum. After an interested party protests a Coast Guard procurement to the Contracting Officer or the Ombudsman, and while the protest is pending, the protester agrees not to file a protest with the GAO or other external forum. If the protest is filed with an external forum, the agency protest will be dismissed.