Inactive

This is a REQUEST FOR QUOTES (RFQ) for commercial service w/parts, prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Reque... This is a REQUEST FOR QUOTES (RFQ) for commercial service w/parts, prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. Request for Quotations number is, 70Z08520QP30393, and is issued as a request for quotes (RFQ). This announcement constitutes the only solicitation; quotations are being requested and a written solicitation will not be issued. This Request for Quotations incorporates provisions and clauses in effect through Federal Acquisition Circular 2005-65 dated January 29, 2013 The NAICS Code is 336611, Responsible SMALL business sources may submit quotes that will be considered by the agency. The contract will be awarded on a firm-fixed-price basis using simplified acquisition procedures in accordance with FAR Part 13.5. The United States Coast Guard Surface Force Logistics Center has a requirement for the following items: FAR ATTACHMENT 4. ALL VALID RESPOSONSIBLE VENDOR’S, WHO HAVE A VALID DUN’S, WHO IS ACTIVE IN OUR SAM’S SYSTEM AND WITH NAICS CODE 336611 IN THEIR PROFILE NOTE: PLEASE EMAIL barry.meyer@uscg.mil 1.QTY (3) Stainless Steel Door with Frame and Hardware to fit Rough Opening of: 28 3/4" x 74 3/4" x 5" Fixed, Clear 1/2 Lite 26" high Reverse Bevel, Left Hand Two Bronze Dogs Located at top & bottom of door opposite hinge side. 2.QTY (1) Stainless Steel Door with Frame and Hardware to fit Rough Opening of: 28 3/4" x 74 3/4" x 5" NO WINDOW Reverse Bevel, Right Hand Two Bronze Dogs Located at top & bottom of door opposite hinge side. 3.QTY (1) Stainless Steel Door with Frame and Hardware to fit Rough Opening of: 28 3/4" x 74 3/4" x 5" Fixed, Clear 1/2 Lite 26" high Reverse Bevel, Right Hand Two Bronze Dogs Located at top & bottom of door opposite hinge side. 4. QTY (1) Stainless Steel Door with Frame and Hardware to fit 32 1/2" x 74 1/2" x 5" Fixed, Clear 1/2 Lite 46" high Reverse Bevel, Left Hand Two Bronze Dogs Located at top & bottom of door opposite hinge side 5.QTY (1) Stainless Steel Door with Frame and Hardware to fit 32 1/2" x 74 1/2" x 5" Fixed, Clear 1/2 Lite 46" high Reverse Bevel, Right Hand Two Bronze Dogs Located at top & bottom of door opposite hinge side NOTE:: Unless otherwise noted above, doors to be double-wall construction with internal bracing and blanketed with fiberglass inner-core insulation. Inner-core shall be reinforced along entire hinge rail, top rail and lock location. Door and bracing to be TYPE 304, 18-8, 18 ga. Stainless Steel. Door hinge to be 3" open x 3/16" dia. pin, TYPE 304, 18-8, 16 ga. Stainless Steel full length piano hinge. Frame to be TYPE 304, 18-8, 14 ga. Stainless Steel. Frame to be four sided with mitered corners integrally welded and polished. Door stops shall be spring loaded neoprene gasket system on top, bottom and sides to assure thermal and acoustic protection for a demanding marine environment. All stop components, except gasket, shall be TYPE 304, 18-8 stainless steel. Welding of bracing to door panels shall be free of weld distortion. All visible stainless steel surfaces shall be polished to a #4 satin finish. Fixed window shall be clear 1/4" laminated safety glass with 3" radius corners installed in door with weather tight rubber seal and stainless steel escutcheon. Door lock shall be Trio Ving #5312 with escutcheons, cylinder lock, thumb turn, spindle, levers, and striker plate welded to door frame. All door locks shall be keyed alike. Each door shall be custom made to fit opening and bulkhead thickness