Inactive

Quotations along with Section D completed for FAR 52.204-24 must be received in the NCI-OA contracting office by 12:00 p.m. EST on April 7, 2020. Description of Requirement The following product featu... Quotations along with Section D completed for FAR 52.204-24 must be received in the NCI-OA contracting office by 12:00 p.m. EST on April 7, 2020. Description of Requirement The following product features/characteristics are required for this requirement: Liquid Nitrogen Filling Station Salient Characteristics: Pressure sensor and electronic valve controls to fill liquid nitrogen into 240L tanks. Must fill liquid nitrogen tank at minimum pressure of 22 psig. Must be fully compatible with NCI’s existing transfer lines in building 37 to provide insulation and prevent nitrogen from leaking. Automatic shut-off when filling is complete. Automatic pressure sensor and control prevent over pressuring the tank to meet the safety and hazard regulation. Cryogenic venting pipe 180” long from the filling station to outside bulk tank area to allow for proper venting to meet NIH building safety regulation. Cryogenic specialized transfer connection with a half-inch valve in order to connect to existing piping system – a connector will be installed to divert cryogenic gas/liquid supply from the existing piping system to the autofill system control. Installation: Must provide proof of previous installation of a liquid nitrogen filling station. Install the autofill system control onto a wall in freezer farm B112. Install a transfer connector from the existing delivery pipe to the system control. Install a vent pipe outside to the nitrogen storage bulk tank area. Drill a hole in the wall to pass the vent pipe to outside the building. Install device without interruption to avoid diminishing the performance of the current nitrogen distribution during normal operations. Necessary training of users. Delivery: Delivery address: 37 Convent Dr. Rm B112, Bethesda MD 20892. It shall be delivered within 120 days of the purchase order award. A minimum 12-month manufacturer warranty must be included Shipping/Handling costs must be included in the quote. NCI will not be responsible in the event charges are not included in the quote. Installation charges must be included in the quote. Note: NCI plans to award a contract that has FOB origin delivery terms. The Contractor that receives the award will be provided with the complete mailing address and point of contact. Upon award, contractor must notify the NCI Technical Point of Contact (TPOC) to schedule the delivery.